giriiş
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Itron EDF 60A 230V Selective Circuit Breaker. Please read this manual thoroughly before use and retain it for future reference.
The Itron EDF 60A 230V Selective Circuit Breaker is designed to protect your electrical installation from overloads and short circuits. It is a single-phase, 2-pole device operating at 230 volts with a 500 mA differential current. Its selective nature allows for adjustable current settings at 30A, 45A, and 60A, ensuring compliance with NF C 62 411 standards.
Ürün Bittiview
Figure 1: Itron EDF 60A 230V Selective Circuit Breaker. A white, rectangular electrical circuit breaker with the Itron logo and specifications printed on its side. It features a blue 'Test' button and a toggle switch.
Temel Özellikler:
- 60 A 500 mA subscriber circuit breaker.
- Provides protection against electrical overloads and short circuits.
- Selective current adjustment: 30 A, 45 A, and 60 A.
- Designed for installation on EDF subscriber circuit breaker plates or meter/circuit breaker plates.
- Conforms to NF C 62 411 standard.
- Monophase, 230 volts, 2 poles, 500 mA differential.
Kurulum ve Yükleme
Kurulum, yalnızca yerel elektrik yönetmeliklerine ve kurallarına uygun olarak yetkili bir elektrikçi tarafından yapılmalıdır.
Güvenlik Önlemleri:
- Ensure the main power supply is disconnected before beginning any installation work.
- Vol'ün doğru olduğunu doğrulayıntage and current ratings of the circuit breaker match your electrical system requirements.
- Uygun kişisel koruyucu ekipman (KKD) kullanın.
Kurulum Adımları:
- Identify the appropriate mounting location on an EDF subscriber circuit breaker plate or a meter/circuit breaker plate.
- Mount the circuit breaker securely onto the DIN rail. The mounting type is DIN rail mounting.
- Connect the incoming phase and neutral conductors to the designated terminals (2 poles).
- Connect the outgoing phase and neutral conductors to the protected circuit.
- Tüm bağlantıların sıkı ve güvenli olduğundan emin olun.
- Set the desired current rating (30A, 45A, or 60A) using the adjustment mechanism on the device. Refer to your electricity provider's specifications for the correct setting.
Kullanım Talimatları
Açma/Kapatma:
- To turn on the power, push the toggle switch to the 'I' (ON) position.
- To turn off the power, push the toggle switch to the 'O' (OFF) position.
Testing the Differential Function:
It is recommended to test the differential function regularly (e.g., monthly) to ensure proper operation.
- Ensure the circuit breaker is in the 'I' (ON) position.
- Press the blue 'Test' button located on the front of the device.
- The circuit breaker should trip, moving the toggle switch to the 'O' (OFF) position.
- To reset, push the toggle switch fully down, then back up to the 'I' (ON) position.
- If the circuit breaker does not trip during the test, contact a qualified electrician for inspection and replacement if necessary.
Bakım
The Itron EDF 60A 230V Selective Circuit Breaker requires minimal maintenance. Regular visual inspections and functional testing are recommended.
Rutin Kontroller:
- Periodically inspect the circuit breaker for any signs of physical damage, discoloration, or overheating.
- Ensure all connections remain tight.
- Perform the differential test as described in the "Operating Instructions" section.
Do not attempt to open or repair the circuit breaker yourself. Refer all servicing to qualified personnel.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sigorta sık sık atıyor. | Overload, short circuit, or ground fault in the protected circuit. |
|
| Circuit breaker does not trip when 'Test' button is pressed. | Faulty differential mechanism or internal damage. |
|
| Circuit breaker feels hot to the touch. | Overload, loose connections, or internal fault. |
|
Özellikler
| Bağlanmak | Değer |
|---|---|
| Marka | Itron |
| Model Numarası | EVET030151 |
| ASIN | B07Z4TDBDN |
| Anma Akımı | 60 A (Adjustable to 30 A, 45 A) |
| Diferansiyel Akım | 500mA |
| Cilttage | 230V |
| Kutup sayısı | 2 |
| Montaj Tipi | DIN rayına montaj |
| Boyutlar (U x G x Y) | 20.2x8x7.3 cm |
| Ağırlık | 400 gram |
| Uyumluluk | NF C 62 411 |
Garanti Bilgileri
Itron products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your local Itron distributor. Keep your proof of purchase for warranty claims.
Destek ve İletişim
For technical assistance, troubleshooting beyond this manual, or spare parts information, please contact Itron customer support or your authorized dealer.
Manufacturer: Itron
Daha fazla bilgi için şu adresi ziyaret edin: Itron brand page.