Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Giriş

Satın aldığınız için teşekkür ederizasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Güvenlik Bilgileri

• Bu ürünü daima kuru tutun. yağmur veya d kullanmayınamp koşullar.
• Sökmeyin. Onarım gerekirse, bu ürün yetkili bir bakım merkezine gönderilmelidir.
• Çocukların erişemeyeceği yerde saklayınız.
• Flaş cihazını yanıcı gazların, kimyasalların veya diğer maddelerin bulunduğu ortamlarda kullanmayın.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Ürün Bittiview

3.1 Temel Özellikler

• Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Güçlü Fonksiyonlar: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Aşırı Isınma Koruması: Designed with protection against overheating for extended use.
• Verimli Performans: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Yakınlaştırma İşlevi: 24 mm'den 105 mm'ye kadar otomatik ve manuel zoom.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Geniş Uyumluluk: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Paket İçeriği

• 1 x Godox TT350N Flash Unit
• 1 x Mini Stand
• 1 x Koruyucu Kılıf
• 1 x Color Filter
• 1 x Kullanım Kılavuzu
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Parça Adları ve İşlevleri

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. Mod Seçim Düğmesi
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Test Düğmesi/Flaş Hazır Göstergesi
5. LCD Panel
6. Yüksek Hızlı Senkronizasyon Düğmesi
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Güç Anahtarı
10. Kilit Halkası
11. Kablosuz Seçim Düğmesi (yeniden kullanılabilir düğme, 2 saniye boyunca uzun basın)
12. HotShoe
13. Ayarlama düğmesi
14. Arama Seç
15. Pil Bölmesi
16. Optik Kontrol Sensörü
17. Odak Yardım Işığı
18. Flaş Kafası
19. Catchlight Paneli
20. Dahili Geniş Panel

4. Kurulum

4.1 Pil Kurulumu

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Flaş ünitesinin yan tarafında bulunan pil bölmesi kapağını açın.
2. Pil yuvasının içindeki kutup işaretlerine (+/-) göre iki adet AA pil yerleştirin.
3. Pil bölmesi kapağını sıkıca kapatın.

4.2 Kameraya Montaj

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Güç Açma/Kapatma

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• Cihazı kapatmak için Güç Düğmesini 'KAPALI' konumuna getirin.

5. Çalışma Modları

The TT350N offers various flash modes to suit different shooting scenarios. Press the MOD Mevcut modlar arasında geçiş yapmak için düğme.

5.1 TTL Otomatik Flaş Modu

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Basın MOD button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manual Flash Mode (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Basın MOD button until 'M' is displayed.
• Çevir Arama Seç to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Basın MOD 'Çoklu' görüntülenene kadar düğmeye basın.
• Kullanın Arama Seç Ve AYARLAMAK button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Yüksek Hızlı Senkronizasyon (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Basın SENKRONİZASYON button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Flaş Pozlama Telafisi (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• TTL modunda, tuşuna basın. AYARLAMAK button. The FEC value will blink.
• Çevir Arama Seç to adjust the FEC value.
• Basın AYARLAMAK Onaylamak için tekrar düğmeye basın.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Kablosuz Flaş Fonksiyonu

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Master Unit: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Slave Unit: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Kullanın GR/CH düğme ve Arama Seç to set the group (A, B, C) and channel (1-16).
• Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• S1 Modu: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• S2 Modu: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the KÖLE button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Uzun basın CFn button for 2 seconds to enter the custom function settings menu.
• Kullanın Arama Seç to navigate through the available functions.
• Basın AYARLAMAK button to select a function and then use the Arama Seç değerini değiştirmek için.
• Basın AYARLAMAK button again to confirm the change.
• Uzun basın CFn button again to exit the custom function settings.

8. Bakım

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Flaş cihazını serin, kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.
• Cihazı sert darbelere maruz bırakmaktan veya düşürmekten kaçının.

9. Sorun Giderme

• Flaş çalışmıyor: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Kablosuz tetikleme sorunları: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Özellikler

11. Garanti ve Destek

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webLütfen garanti talepleriniz için satın alma belgenizi saklayın.