giriiş
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Genesis Nitro 950 Gaming Chair. Please read these instructions carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Güvenlik Bilgileri
- Montajdan önce tüm bileşenlerin eksiksiz ve hasarsız olduğundan emin olun. Herhangi bir parça eksik veya kırıksa kullanmayın.
- Montaj talimatlarını harfiyen takip edin. Yanlış montaj, dengesizliğe ve yaralanmaya yol açabilir.
- Sandalyenin üzerine çıkmayın. Sadece oturmak için kullanın.
- 150 kg (330 lbs) maksimum ağırlık kapasitesini aşmayın.
- Montaj sırasında çocukları ve evcil hayvanları uzak tutun. Küçük parçalar boğulma tehlikesi yaratabilir.
- Tüm cıvata ve vidaların sıkı olduğundan emin olmak için periyodik olarak kontrol edin. Gerektiğinde yeniden sıkın.
- Malzemenin bozulmasını önlemek için sandalyeyi doğrudan güneş ışığına veya aşırı sıcaklıklara maruz bırakmaktan kaçının.
Paket İçeriği
Before beginning assembly, verify that all components are included in your package. While specific part names may vary, a typical gaming chair package includes:
- Koltuk tabanı
- arkalık
- Kolçaklar (2)
- Yıldız üssü
- Tekerlekler (5)
- Gaz kaldırma silindiri
- Gazlı kaldırma kapağı
- Mekanizma plakası
- Bel yastığı
- Kafalık yastığı
- Donanım seti (vidalar, rondelalar, Allen anahtarı)
Kurulum ve Montaj
Assembly is required for this product. Follow these general steps for proper setup. Refer to the included assembly diagram for detailed visual guidance.
- Yıldız tabanına tekerlekleri takın: Insert each of the five casters into the holes at the end of the star base arms until they click securely into place.
- Gazlı Asansörü Takın: Place the gas lift cylinder into the central hole of the star base. Cover the gas lift with the telescopic plastic cover.
- Mount Mechanism Plate: Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism (usually indicated by a label or the lever side) faces the front of the seat. Secure with screws and washers using the provided Allen key.
- Kolçakları takın: Secure the armrests to the sides of the seat base using the designated screws. Do not overtighten initially to allow for minor adjustments.
- Oturma yerini sırt dayanağına bağlayın: Attach the backrest to the seat base using the side brackets and screws. Ensure proper alignment before tightening all screws firmly.
- Koltuk takımını gazlı kaldırma mekanizmasına yerleştirin: Birleştirilmiş koltuğu ve sırtlığı dikkatlice gazlı kaldırma silindirinin üzerine yerleştirin, ortalanmış ve sabit olduğundan emin olun.
- Yastıkları Takın: Position the lumbar cushion and headrest cushion using their straps as desired for ergonomic support.
Kullanım Talimatları
The Genesis Nitro 950 Gaming Chair offers several adjustment features to customize your seating experience.
1. Koltuk Yükseklik Ayarı
To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at the desired height to lock it in place.
2. Backrest Recline Adjustment
The backrest can be reclined up to 165 degrees. Locate the recline lever on the right side of the chair, near the seat. Pull the lever up to release the backrest lock, then lean back to the desired angle. Release the lever to lock the backrest in position.
3. Kolçak Ayarı
The armrests are four-way adjustable. Depending on the specific model, adjustments may include height, forward/backward, left/right swivel, and inward/outward angle. Locate the buttons or levers on the armrests to unlock and adjust them. Press or lift the control, move the armrest to the desired position, and release to lock.
4. Rocker and Locking Function (Frog Mechanism)
The chair is equipped with an advanced mechanism that allows for a rocking motion and the ability to lock the chair in any position. To enable rocking, pull out the lever located on the left side, beneath the seat. To disable rocking and lock the chair in an upright or reclined position, push the lever back in.
5. Lumbar and Headrest Cushion Positioning
The ergonomic headrest and lumbar cushion are filled with memory foam for comfort. Adjust their position by sliding them along the straps on the backrest to find optimal support for your neck and lower back.
Bakım
Regular maintenance helps prolong the life and appearance of your Genesis Nitro 950 Gaming Chair.
- Temizlik: Reklamla temizleyinamp cloth. For ecological leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid abrasive cleaners or solvents.
- Bağlantı Elemanları: Periodically check all screws and bolts, especially after initial assembly and every few months, to ensure they remain tight. Retighten as needed to maintain stability.
- Tekerlekler: Keep casters free of hair, dust, and debris to ensure smooth movement.
- Gaz Kaldırma: Do not attempt to disassemble or repair the gas lift cylinder. It contains pressurized gas.
Sorun giderme
If you encounter issues with your Genesis Nitro 950 Gaming Chair, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sandalye dengesiz veya sallanıyor. | Loose screws or incorrect assembly | Check and tighten all assembly screws. Ensure the gas lift is fully seated in the star base and mechanism. |
| Seat height adjustment not working | Gas lift issue or lever mechanism obstruction | Ensure the lever is fully engaged. Check for any obstructions. If the gas lift is faulty, it may need replacement (contact support). |
| Sırt dayanağı yatırılmıyor veya kilitlenmiyor | Recline lever not engaged or mechanism obstruction | Ensure the recline lever is fully pulled or pushed to engage/disengage the lock. Check for obstructions around the mechanism. |
| Gıcırtı sesleri | Parçalar arasındaki gevşek bağlantılar veya sürtünme | Tüm vidaları sıkın. Gerekirse hareketli parçalara veya bağlantı noktalarına az miktarda silikon yağlayıcı uygulayın. |
| Tekerlekler düzgün bir şekilde dönmüyor | Debris in casters | Tekerleklerin üzerindeki saç, toz veya diğer kalıntıları temizleyin. |
Özellikler
Detailed specifications for the Genesis Nitro 950 Gaming Chair:
| Özellik | Detay |
|---|---|
| Marka | Yaratılış |
| Model Adı | Nitro950 |
| Model Numarası | NFG-1366 |
| Renk | Siyah |
| Malzeme | Ecological Leather, Memory Foam (fill), Alloy Steel (frame) |
| Ürün Boyutları (D x G x Y) | 34.25" x 27.95" x 14.37" (87 x 71 x 36.5 cm) |
| Ürün Ağırlığı | 28.72 Kilogram (yaklaşık 63.3 lbs) |
| Maksimum Ağırlık Önerisi | 150 Kilogram (yaklaşık 330 lbs) |
| Sırtlık Yatırma Açısı | 165°'ye kadar |
| Kol Dayama Tipi | Four-way adjustable |
| Mekanizma | Advanced rocker and locking function |
| Tekerlekler | Robust large wheels with brakes, plastic-coated for scratch-resistant surfaces |
| Montaj Gerekli | Evet |
| Önerilen Kullanımlar | Oyun, Ofis |
Garanti Bilgileri
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase.
Müşteri Desteği
If you require further assistance, have questions about your product, or need to report a missing or damaged part, please contact the retailer where you purchased the Genesis Nitro 950 Gaming Chair or visit the official Genesis webdestek iletişim bilgileri için site.