Thincol STC-3000 Digital Temperature Controller User Manual

1. Giriş

The Thincol STC-3000 is a versatile digital temperature controller designed for precise temperature management in various applications such as farms, greenhouses, and refrigeration systems. This device features a touch switch mode and offers high accuracy for maintaining stable temperature conditions, which is crucial for the health and safety of plants or animals.

This manual provides detailed instructions for the installation, operation, and maintenance of your STC-3000 temperature controller. Please read it thoroughly before use to ensure proper functionality and safety.

2. Temel Özellikler

• Geniş Sıcaklık Kontrol Aralığı: Measures and controls temperature from -55°C to 120°C (-67°F to 248°F).
• Yüksek Doğruluk: 0.1°C temperature control accuracy.
• Touch Switch Mode: User-friendly interface for setting parameters.
• Çift İşlevsellik: Capable of both heating and cooling control.
• Çok Yönlü Uygulama: Suitable for farms, greenhouses, refrigeration houses, and other temperature-sensitive environments.

3. Güvenlik Bilgileri

Yaralanmayı veya cihaza zarar gelmesini önlemek için lütfen aşağıdaki güvenlik önlemlerine uyun:

• Güç kaynağı hacmini sağlayıntage matches the controller's specifications (110-220V AC).
• All wiring should be performed by a qualified electrician to prevent electrical shock.
• Cihazı suya veya aşırı neme maruz bırakmayın.
• Kontrol cihazını sökmeyin veya üzerinde değişiklik yapmayın.
• Çocukların erişemeyeceği yerde saklayınız.
• Herhangi bir kablolama veya bakım işlemi yapmadan önce elektrik bağlantısını kesin.

4. Kurulum ve Kablolama

The STC-3000 is designed for panel mounting. Ensure adequate space for ventilation and access to wiring terminals.

4.1 Kablolama Şeması

Refer to the diagram below for correct wiring connections. Incorrect wiring can damage the device or connected equipment.

Şekil 1: Wiring diagram for the STC-3000 temperature controller. Terminals 1 and 2 are for power input (110-220V AC). Terminals 3 and 4 are for the NTC temperature sensor. Terminals 5 and 6 are for the load (heating or cooling device).

Kablo Bağlantıları:

• Power Input (1, 2): Connect your 110-220V AC power supply to these terminals.
• Sensor (3, 4): Connect the NTC temperature sensor to these terminals. The sensor is non-polar, so connection order does not matter.
• Load (5, 6): Connect your heating or cooling device (e.g., heater, fan, compressor) to these terminals. Ensure the load's power requirements do not exceed the controller's maximum current rating (10A or 30A, depending on model).

4.2 Montaj

The controller is designed for flush panel mounting. Cut an opening of approximately 71mm x 29mm (2.8in x 1.14in) in your panel. Insert the controller and secure it using the integrated clips on the sides.

Şekil 2: Taraf view of the STC-3000, showing the orange mounting clips used to secure the controller into a panel cutout.

5. Kullanım Talimatları

The STC-3000 features a digital display and touch buttons for easy parameter setting.

5.1 Ön Panel Üzeriview

Şekil 3: Front panel of the STC-3000 showing the digital display and touch buttons: SET, RST, Up arrow, Down arrow, and OK/°C/°F.

• Ayarlama düğmesi: Parametre ayarlama moduna girer.
• RST Düğmesi: Resets the controller or exits setting mode without saving.
• Yukarı Ok (▲): Increases values or navigates menu.
• Aşağı Ok (▼): Decreases values or navigates menu.
• OK / °C/°F Button: Confirms settings or switches between Celsius and Fahrenheit display.

5.2 Sıcaklık Parametrelerinin Ayarlanması

1. Set Start Temperature (P1):
   • Basılı tutun AYARLAMAK button for 3 seconds to enter the parameter setting menu.
   • Kullanın Up or Aşağı arrows to navigate to P1.
   • Basmak AYARLAMAK again to enter P1 setting.
   • Kullanmak Up or Aşağı İstenilen başlangıç ​​sıcaklığını ayarlamak için.
   • Basmak OK onaylamak ve kaydetmek için
2. Set Stop Temperature (P2):
   • Follow the same steps as P1, but navigate to P2.
   • Adjust the desired stop temperature.
   • Basmak OK onaylamak ve kaydetmek için
3. Temperature Correction (P3):
   • Allows for calibration of the temperature sensor. Adjust if the displayed temperature differs from a known accurate thermometer.
4. Delay Start (P4):
   • Sets a delay time (in minutes) before the output activates after reaching the set temperature. Useful for protecting compressors in refrigeration systems.

The controller will automatically save settings and return to the main display after a few seconds of inactivity or by pressing the RST düğme.

5.3 Sıcaklık Birimlerinin Değiştirilmesi (°C/°F)

Santigrat (°C) ve Fahrenheit (°F) arasında geçiş yapmak için, basılı tutun. OK / °C/°F 3 saniye boyunca düğmeye basın.

6. Bakım

To ensure the longevity and accurate operation of your STC-3000 controller, follow these maintenance guidelines:

• Temizlik: Ekranı silin veasinYumuşak ve kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Sensör Bakımı: Ensure the temperature sensor is clean and free from debris. Avoid bending or damaging the sensor cable.
• Çevresel Koşullar: Kontrol cihazını belirtilen sıcaklık ve nem aralıklarında çalıştırın.
• Kablolama Denetimi: Tüm kablo bağlantılarının güvenli ve korozyondan arınmış olduğundan emin olmak için düzenli olarak kontrol edin.

7. Sorun Giderme

If you encounter issues with your STC-3000, refer to the following common problems and solutions:

8. Özellikler

9. Garanti ve Destek

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Thincol customer service. Keep your purchase receipt as proof of purchase.