Extreme Networks Summit X460-24p Managed Switch User Manual

giriiş

This manual provides instructions for the Extreme Networks Summit X460-24p, a high-performance, managed Layer 3 Ethernet switch designed for enterprise and data center environments. It features 24 Gigabit Ethernet ports with Power over Ethernet (PoE) capabilities, along with additional SFP and shared Gigabit SFP ports for flexible connectivity.

Güvenlik Bilgileri

Güvenlik Yönergeleri

• Always disconnect all power supply inputs before removing any panel for servicing.
• This device contains a Class 1 Laser product. Avoid direct eye exposure to beam.
• Kurulum sırasında uygun topraklamanın yapıldığından emin olun.
• Refer to the installation manual for power cord selection and additional compliance markings.

Paket İçeriği

Kutuda Neler Var?

• Extreme Networks Summit X460-24p Switch
• Güç Kablosu (bölgeye özgü)
• Raf montaj kiti
• Belgeler (bu kılavuz)

Ürün Bittiview

The Summit X460-24p switch is designed for efficient network management and high-speed data transfer.

Arka Panel

This image displays the rear panel of the Summit X460-24p switch, highlighting the power input, fan modules, and the SummitStack ports. The overall chassis is purple.

Ayrıntılı view of the SummitStack ports (Stack Port 1 and Stack Port 2) located on the rear of the switch, used for stacking multiple switches.

Ürün Etiketi

This label provides critical identification information for the switch, including Model: 16403, Summit X460-24p, System No.: 800323-00-03, and Serial No.: 1052G-03941.

İsteğe bağlı bileşenler

This image shows the label for an optional Extreme Networks Summit 750W PoE AC Power Supply Unit (PSU), Model 10931, System No. 800382-00-03, Serial No. 1053A-41986.

This image displays the label for an optional Extreme Networks SummitStack Module, Model 16419, System No. 800384-00-01, Serial No. 1122G-02565.

Kurmak

Kurulum Kılavuzu

Raf Montajı

The Summit X460-24p is designed for standard 19-inch rack mounting. Use the provided rack-mounting kit to secure the switch in a server rack. Ensure adequate ventilation around the unit.

Güç Bağlantısı

Connect the power cord to the AC power inlet on the rear of the switch and then to a grounded electrical outlet. The switch will power on automatically.

Ağ Kablolarını Bağlama

• Connect Ethernet cables from your network devices to the 24 10/100/1000Base-T PoE ports on the front panel.
• For uplink or fiber connections, use the SFP or shared Gigabit SFP ports.
• For stacking, connect SummitStack ports on multiple switches using appropriate stacking cables.

İlk Yapılandırma Erişimi

Access the switch's management interface via a console cable connected to the console port, or through a web browser if the switch has a default IP address configured. Refer to the Extreme Networks documentation for detailed initial setup procedures.

Kullanım Talimatları

Temel İşlemler

Güç Açık/Kapalı

The switch powers on automatically when connected to a power source. To power off, disconnect the power cord. For proper shutdown, it is recommended to use the software-based shutdown command if available.

LED Göstergeleri

Observe the LED indicators on the front panel for status information regarding power, system health, port activity, and PoE status. Consult the full product documentation for a detailed explanation of each LED's behavior.

Yönetim Arayüzü

The switch can be managed via a Command Line Interface (CLI) accessible through the console port or Telnet/SSH, or through a web-tabanlı grafiksel kullanıcı arayüzü (GUI).

Bakım

Bakım ve Onarım

Temizlik

Keep the switch clean and free of dust. Use a soft, dry cloth for external cleaning. Do not use liquid or aerosol cleaners.

Firmware güncellemeleri

Periodically check the Extreme Networks support webEn iyi performans ve güvenliği sağlamak için ürün yazılımı güncellemeleri için siteyi ziyaret edin. Ürün yazılımı yükseltme prosedürleri için verilen talimatları izleyin.

Fan ve Güç Kaynağı Modülleri

The switch may feature hot-swappable fan and power supply modules. Refer to the Extreme Networks documentation for instructions on replacement if necessary.

Sorun giderme

Ortak Sorunlar

Güç Yok

• Güç kablosunun hem anahtara hem de elektrik prizine güvenli bir şekilde bağlı olduğundan emin olun.
• Elektrik prizinin çalışır durumda olduğundan emin olun.

Port Link Down

• Ethernet kablosunun her iki ucundaki bağlantıyı kontrol edin.
• Bağlı cihazın açık ve düzgün çalıştığını doğrulayın.
• Check the port status via the management interface.

Ağ Bağlantı Sorunları

• Verify IP configuration and network settings.
• Check for conflicting IP addresses.
• Consult network diagnostics tools.

Özellikler

Teknik Özellikler

Garanti ve Destek

Garanti Bilgileri

This product typically comes with a 90-day limited warranty. For specific warranty terms and conditions, please refer to the official Extreme Networks warranty statement or contact your vendor.

Teknik Destek

For technical assistance, visit the official Extreme Networks support website or contact their customer service. Have your product model and serial number ready when seeking support.