Beta 1972/18 Impact Driver User Manual

1. Ürün Bittiview

The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.

• Fırçasız Dijital Motor: Provides increased power and efficiency.
• Yüksek Tork: Up to 75 Nm for demanding applications.
• Değişken Hız: Up to 2100 RPM for versatile drilling and driving.
• LED Ön Aydınlatma: Çalışma alanını aydınlatarak görüş alanını iyileştirir.
• Pil Koruması: Triple battery self-protection against overload and cell power differences.

Figure 1.1: The Beta 1972/18 Impact Driver, showcasinkompakt tasarımı ve ergonomik sapı sayesinde.

2. Dahil Edilen Bileşenler

Your Beta 1972/18 Impact Driver package includes the following items:

• Beta 1972/18 Impact Driver
• 2 x 5Ah Lityum İyon Pil
• Quick Charger (80 minutes charging time)
• Hard Case for storage and transport
• Belt Clip (right/left mountable)

Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.

3. Kurulum ve Montaj

3.1 Pilin Şarj Edilmesi

1. Connect the quick charger to a suitable power outlet.
2. 5 Ah lityum iyon pili yerine oturana kadar şarj aletinin üzerine kaydırın.
3. Allow approximately 80 minutes for a full charge. The charger will indicate when charging is complete.
4. Şarj işlemi tamamlandıktan sonra pili şarj cihazından çıkarın.

3.2 Pili Takma

• Align the charged battery with the base of the impact driver.
• Slide the battery firmly into the tool until it locks securely.
• To remove, press the battery release buttons on the sides and slide the battery out.

3.3 Kemer Klipsinin Takılması

The belt clip can be attached to either the right or left side of the tool for convenient carrying.

1. Locate the screw hole on the side of the tool where you wish to attach the clip.
2. Align the belt clip with the hole and secure it with the provided screw.

4. Kullanım Talimatları

4.1 Açma/Kapatma ve Hız Kontrolü

• To power on the tool, press the trigger switch. The LED front light will illuminate.
• To power off, release the trigger switch.
• The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
• Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.

4.2 Tork Ayarı

The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.

4.3 Delme ve Çakma

1. Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
2. İstediğiniz hız ve tork ayarını seçin.
3. Aleti iş parçasına sıkıca yerleştirin.
4. Press the trigger to begin drilling or driving. Apply steady, even pressure.
5. For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.

Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.

Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.

5. Bakım

5.1 Temizlik

• Temizlemeden önce mutlaka aküyü çıkarın.
• Aleti temiz bir bezle silin.amp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
• Keep ventilation openings clear of dust and debris. Use compressed air if necessary.

5.2 Pil Bakımı ve Saklama

• Pilleri serin ve kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.
• Uzun süreli depolama için pilleri yaklaşık %50 kapasiteye kadar şarj edin.
• Do not store batteries in a discharged state to prevent damage.

5.3 Genel Bakım

• Regularly inspect the chuck for wear and tear.
• Check the power cord of the charger for any damage.
• Alet üzerindeki tüm vidaların ve bağlantı elemanlarının sıkı olduğundan emin olun.

6. Sorun Giderme

7. Özellikler

8. Garanti ve Destek

The Beta 1972/18 Impact Driver comes with a 3 Yıllık GarantiKalitesi ve performansı konusunda gönül rahatlığı sağlar.

Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.

For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools webSiteyi ziyaret edin. Garanti işlemleri için satın alma fişinizi saklayın.

Daha fazla bilgi için şu adresi ziyaret edebilirsiniz: Beta Brand Page on Amazon.