Inkbird ITC308S Temperature Controller User Manual

1. Giriş

The Inkbird ITC308S is a reliable and easy-to-use temperature controller designed for precise temperature management in various applications, particularly aquariums. It features dual relay outputs for both heating and cooling devices, ensuring stable temperature control. The unit includes a fully submersible probe for accurate temperature readings in liquid environments.

2. Güvenlik Bilgileri

• Ensure the power supply matches the controller's requirements (110V for this model).
• Do not immerse the main controller unit in water. Only the probe is submersible.
• Herhangi bir bakım veya kurulum işlemine başlamadan önce daima gücü kesin.
• Cihazı çocuklardan ve evcil hayvanlardan uzak tutunuz.
• Herhangi bir parçası hasarlı ise cihazı kullanmayınız.

3. Paket İçeriği

• ITC308S Temperature Controller Unit
• Submersible Temperature Probe
• Suction Cup for Probe Mounting
• Kullanıcı Kılavuzu

Şekil 3.1: The Inkbird ITC308S Temperature Controller and its included accessories, packaged in a brown box.

4. Ürün Bittiview

The ITC308S features a main control unit with a dual LED display, showing both the present value (PV) and set value (SV) temperatures. It has dedicated outlets for heating and cooling devices, and a detachable submersible probe for accurate temperature sensing.

Şekil 4.1: Üzerindeview of the Inkbird ITC308S controller, showing the display, control buttons, power cord, and probe connection.

Şekil 4.2: The dual power outlets, clearly marked for 'HEATING' and 'COOLING' devices.

Şekil 4.3: The submersible temperature probe, designed for accurate readings in water, shown with its suction cup.

5. Özellikler

6. Kurulum Talimatları

1. Probu bağlayın: Plug the submersible temperature probe into the designated port on the main controller unit. Use the provided suction cup to secure the probe inside your aquarium or water bath, ensuring it is fully submerged and away from direct heat sources or strong currents.
2. Isıtma/Soğutma Cihazlarını Bağlayın: Plug your heating device (e.g., aquarium heater) into the 'HEATING' outlet and your cooling device (e.g., cooling fan) into the 'COOLING' outlet on the power strip. Ensure devices are rated within the controller's maximum output load (1200W).
3. Güç Açık: Plug the main power cord of the ITC308S controller into a standard 110V AC power outlet. The LED display will illuminate, showing the current temperature (PV) and the set temperature (SV).

Şekil 6.1: The submersible probe correctly placed within an aquarium, ensuring accurate temperature measurement.

7. Kullanım Talimatları

1. View Current Temperature (PV): The upper LED display shows the current measured temperature (Process Value).
2. View Set Temperature (SV): The lower LED display shows the desired set temperature (Set Value).
3. Sıcaklığı Ayarla:
   • Basın AYARLAMAK button once. The SV display will flash.
   • Kullanın Yukarı (▲) or Aşağı (▼) İstenilen sıcaklığı ayarlamak için düğmeler.
   • Basmak AYARLAMAK again to confirm and save the setting, or wait a few seconds for it to save automatically.
4. Heating/Cooling Indication: The 'HEATING' or 'COOLING' indicator lights will illuminate when the respective outlet is active.
5. Sıcaklık Kalibrasyonu: Refer to the detailed instructions in the included paper manual for advanced settings like temperature calibration, differential settings, and alarm parameters. These settings allow fine-tuning of the controller's response.
6. Alarmlar: The controller features over-temperature and sensor fault alarms. If an alarm triggers, the display will show an error code (e.g., 'HHH' for over-temperature, 'LLL' for under-temperature, 'ERR' for sensor fault) and an audible alert may sound. Address the issue promptly.

8. Bakım

• Probun Temizlenmesi: Regularly inspect and clean the submersible probe to prevent algae or mineral buildup, which can affect accuracy. Use a soft cloth and mild cleaning solution if necessary.
• Kontrol Ünitesi: Wipe the main controller unit with a dry, soft cloth. Do not use abrasive cleaners or immerse it in water.
• Kablo Denetimi: Periodically check all cables for any signs of wear, cuts, or damage. Replace if necessary.

9. Sorun Giderme

10. Garanti ve Destek

Inkbird products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official Inkbird webalan. Garanti talepleri için satın alma makbuzunuzu saklayın.