1. Giriş
This manual provides instructions for the proper setup, operation, and maintenance of your Ohaus CR5200 Compass Series Portable Balance. Please read this manual thoroughly before using the balance to ensure correct operation and to prevent damage.
The Ohaus CR5200 is a portable digital balance designed for accurate weighing with a capacity of 5200 grams and a readability of 1 gram. It supports multiple weighing units including grams (g), ounces (oz), pounds:ounces (lb:oz), troy ounces (ozt), and pennyweights (dwt).
Resim 1.1: Üst view of the Ohaus CR5200 Compass Series Portable Balance, showing the display and control buttons.
2. Güvenlik Bilgileri
- Operate the balance on a stable, level surface free from vibrations and drafts.
- Avoid exposing the balance to extreme temperatures, humidity, or direct sunlight.
- Do not overload the balance beyond its maximum capacity of 5200 grams.
- Teraziyi temiz ve tozdan, kirden arındırılmış halde tutun.
- Use only the specified power source (3 AA batteries or compatible AC adapter).
3. Kurulum
3.1 Paketin açılması
Carefully remove the balance from its packaging. Inspect the balance for any signs of damage. Retain the packaging for future transport or storage.
3.2 Powering the Balance
The Ohaus CR5200 can be powered by three AA alkaline batteries or an external AC adapter (not included, but compatible with the side power port).
Pil Montajı:
- Locate the battery compartment on the underside of the balance.
- Pil bölmesinin kapağını açın.
- Insert three AA alkaline batteries, ensuring correct polarity (+/-).
- Pil bölmesi kapağını sıkıca kapatın.
Resim 3.1: Alt taraf view of the balance with the battery compartment open, showing three AA batteries installed.
Harici Güç Bağlantısı:
If using an AC adapter, connect it to the power input port located on the side of the balance. Ensure the adapter meets the specified voltage and current requirements (e.g., 12V 0.5A).
Resim 3.2: Yan view of the balance, highlighting the external power input port.
3.3 Yerleştirme
Place the balance on a firm, level, and stable surface. Avoid locations near air vents, windows, or equipment that generates vibrations or electromagnetic interference.
4. Kullanım Talimatları
4.1 Güç Açma/Kapatma
- Açmak için: tuşuna basın [AÇIK/KAPALI] button. The display will show a self-test sequence and then settle at 0.0 g.
- Kapatmak için: tuşuna basın ve basılı tutun [AÇIK/KAPALI] ekran kapanana kadar düğmesine basın.
4.2 Selecting Weighing Units
The balance supports multiple weighing units: grams (g), ounces (oz), pounds:ounces (lb:oz), troy ounces (ozt), and pennyweights (dwt).
- To change the weighing unit: Press the [BİRİM] button (often labeled with 'g' and an arrow). Each press cycles through the available units.
4.3 Dara İşlevi
The tare function allows you to zero out the weight of a container, so only the weight of the contents is measured.
- Place the empty container on the weighing pan. The display will show its weight.
- Basın [DARA/SIFIR] button (often labeled with '→0←'). The display will reset to 0.0.
- Tartılacak malzemeyi kaba ekleyin. Ekran, malzemenin net ağırlığını gösterecektir.
Image 4.1: The balance with an empty bowl on the weighing pan, ready for the tare function.
4.4 Temel Tartım
- Ensure the balance is powered on and the display shows 0.0 in the desired weighing unit.
- Tartılacak nesneyi dikkatlice tartım kabının ortasına yerleştirin.
- Wait for the display to stabilize. The stable weight will be shown.
- Ürünü tavadan çıkarın.
4.5 Harici Kalibrasyon
The Ohaus CR5200 features external calibration. This process requires a known calibration weight (not included) to ensure accuracy. Refer to the full Ohaus CR Series manual for detailed calibration procedures specific to your model.
Image 4.2: The balance with a cylindrical calibration weight placed on the weighing pan.
5. Bakım
5.1 Temizlik
- Wipe the balance exterior with a soft, damp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- Ensure no liquids enter the balance housing or display.
- Keep the weighing pan clean to ensure accurate readings.
5.2 Pil Değişimi
When the battery indicator appears on the display, replace the three AA alkaline batteries as described in Section 3.2.
5.3 Depolama
When not in use for extended periods, remove the batteries to prevent leakage. Store the balance in a dry, dust-free environment. The Ohaus CR5200 is designed for portability and can be stored in a protective case (if available).
Image 5.1: The Ohaus CR5200 balance shown alongside its protective carrying case.
6. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Bakiye açılmıyor. | Dead or incorrectly installed batteries; no AC power. | Replace batteries or check AC adapter connection. Ensure correct battery polarity. |
| Yanlış veya istikrarsız okumalar. | Unstable surface; drafts; electromagnetic interference; balance needs calibration. | Move balance to a stable, level surface. Shield from drafts. Recalibrate the balance (refer to Section 4.5). |
| Ekranda "Err" veya hata kodu görünüyor. | Aşırı yüklenme; dahili hata. | Remove excess weight if overloaded. Power cycle the balance. If error persists, contact Ohaus support. |
| Tare function not working. | Balance not stable; button not pressed correctly. | Ensure balance is stable and display is settled. Press the TARE/ZERO button firmly. |
7. Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | CR5200 |
| Kapasite | 5200 gr (5.2 kg) |
| Okunabilirlik | 1 gr |
| Tartım Birimleri | g, oz, lb:oz, ozt, dwt |
| Kalibrasyon Türü | Harici |
| Güç Kaynağı | 3 AA alkaline batteries (included) or AC adapter (not included) |
| Görüntü Türü | Dijital |
| Malzeme | Plastik |
| Ürün Boyutları (U x G x Y) | 23.62x17.02x5.59 cm |
| Ürün Ağırlığı | 408.23 g (yaklaşık 14.4 ons) |
| Özel Özellikler | Taşınabilir |
8. Garanti ve Destek
For warranty information, technical support, or service inquiries, please contact Ohaus customer service or visit the official Ohaus webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.