1. Giriş
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOELER PIR Motion Sensor Light Switch. This device is designed to provide convenient, hands-free lighting control by detecting motion and ambient light levels, helping to conserve energy.
Temel özellikler şunlardır:
- Eller Serbest Kullanım: Automatically activates lights upon motion detection.
- Çift Modlar: Supports Occupancy (OCC) and Vacancy (VAC) modes for flexible control.
- Özelleştirilebilir Ayarlar: Adjustable time delays, sensitivity, and light level sensing.
- Geniş Uyumluluk: Works with 300W LED, 300W CFL, and 600W incandescent light bulbs.
- Güvenlik Sertifikalı: UL Certified, FCC Listed, and California Title 24 Compliant.
Image 1.1: ECOELER Motion Sensor Light Switch with UL, FCC, and Title 24 certifications.
2. Güvenlik Bilgileri
UYARI: ELEKTRİK ÇARPMASI RİSKİ. Improper installation can lead to serious injury or death. Always consult a qualified electrician to ensure proper wiring and installation, especially if you are unfamiliar with electrical work.
- Güç Bağlantısının Kesilmesi: ALWAYS turn off power at the circuit breaker or fuse box before installing or servicing the switch.
- Nötr Tel Gerekli: This switch requires a neutral wire for operation. Verify your electrical box has a neutral wire (typically white) before proceeding with installation.
- Sadece İç Mekanda Kullanım: Kapalı alan uygulamaları için tasarlanmıştır.
- Yük Uyumluluğu: Maksimum su miktarını aşmayıntage ratings: 300W LED, 300W CFL, 600W Incandescent.
- Single Pole Only: This switch is designed for single-pole circuits only. It is not suitable for 3-way or multi-way circuits.
3. Ürün Bittiview ve Bileşenler
The ECOELER Motion Sensor Light Switch integrates a Passive Infrared (PIR) sensor to detect motion and an ambient light sensor to optimize energy usage. The switch features a manual ON/OFF button and adjustable dials for customization.
Dahil Bileşenler:
- Motion Sensor Switch (YM2108 Series)
- Duvar Plakası
- Montaj Vidaları (4)
- Terminal Caps (4)
- Kullanıcı Kılavuzu
Image 3.1: Included accessories and product dimensions.
Resim 3.2: Üzeriview of the PIR Motion Detector, Manual ON/OFF Button, and adjustment dials for Time, Sense, and Light.
4. Kurulum ve Kurulum
Kurulum Öncesi Kontrol Listesi:
- Devre kesiciden elektriğin KAPALI olduğundan emin olun.
- Confirm the presence of a neutral wire in your electrical box.
- Tools required: Screwdriver, wire strippers, electrical tape (optional).
Kablolama Kılavuzu:
Follow these steps carefully. If you are unsure, consult a qualified electrician.
- Sigortadan elektriği kesin.
- Mevcut duvar plakasını ve şalteri çıkarın.
- Identify the wires in your electrical box: Hot (Black), Load (Red), Neutral (White), and Ground (Green or bare copper).
- Connect the wires from the ECOELER switch to your house wiring using the provided terminal caps:
- Black wire (Switch) ile Hot wire (Circuit Box)
- Red wire (Switch) ile Load wire (Circuit Box) (connects to light/fan)
- White wire (Switch) ile Neutral wire (Circuit Box) (GEREKLİ)
- Green wire (Switch) ile Ground wire (Circuit Box)
- Carefully push the wired switch into the electrical box.
- Secure the switch to the electrical box with the mounting screws.
- Duvar plakasını takın.
- Sigortadan elektriği geri verin.
Image 4.1: Detailed wiring diagram for the ECOELER Motion Sensor Light Switch (YM2108 Series).
5. Kullanım Talimatları
Your ECOELER Motion Sensor Light Switch offers two primary operating modes and several adjustable settings to customize its performance.
Çalışma Modları:
The mode selector switch is located on the front of the device, typically beneath a small cover or flap.
- OCC (Occupancy) Mode: In this mode, the lights will automatically turn ON when motion is detected and automatically turn OFF when the space is unoccupied for the set time delay. This mode provides full hands-free operation.
- VAC (Vacancy) Mode: In this mode, the lights must be turned ON manually using the manual ON/OFF button. The lights will then automatically turn OFF when no motion is detected for the set time delay. This mode is ideal for rooms where manual control is preferred for turning on, but automatic turn-off is desired for energy saving.
Image 5.1: Mode selection switch for Occupancy (Auto on & off) and Vacancy (Manual on & Auto off).
Ayarlanabilir Ayarlar:
Three small rotary dials allow you to fine-tune the switch's behavior. These are typically located behind a small cover on the front of the switch.
- ZAMAN (Zaman Gecikmesi): Adjusts how long the lights remain ON after the last detected motion.
- Range: 15 seconds (TEST) to 30 minutes.
- Setting 'TEST' is for quick testing of motion detection.
- SENSE (Sensitivity): Controls the motion detection range.
- Range: Approximately 6.56 ft (20%) to 29.52 ft (100%).
- Adjust as needed to prevent unwanted triggers or ensure adequate coverage.
- LIGHT (Ambient Light Level): Determines the ambient light threshold at which the sensor will allow the lights to turn ON.
- Range: 1=5lux (very dark) to 5=all day (always allow lights to turn on, regardless of ambient light).
- Setting '5' effectively disables the ambient light sensor, allowing the lights to turn on with motion even in bright conditions.
Image 5.2: Detailed breakdown of adjustable settings for Time, Sense, and Light.
6. Bakım
The ECOELER Motion Sensor Light Switch requires minimal maintenance to ensure optimal performance.
- Temizlik: Periodically wipe the sensor lens and switch surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the device.
- Engelsiz: Ensure the sensor's field of view is not obstructed by furniture, curtains, or other objects, as this can affect motion detection.
- Kullanıcı Tarafından Bakımı Yapılabilecek Parça Yok: Do not attempt to open or repair the switch. Refer all servicing to qualified personnel.
7. Sorun Giderme
If you experience issues with your motion sensor light switch, try the following troubleshooting steps:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Lights do not turn ON with motion. |
|
|
| Lights stay ON too long or turn OFF too quickly. |
|
|
| Lights turn ON unexpectedly (false triggers). |
|
|
| Işıklar sönmüyor. |
|
|
8. Özellikler
| Şartname | Detay |
|---|---|
| Çalışma Modu | Automatic (Occupancy/Vacancy) |
| Güncel Derecelendirme | 10 Amps |
| Çalışma Hacmitage | 120 Volt (AC) |
| İletişim Türü | Normalde Açık |
| Bağlayıcı Türü | Wiring Cap Connect |
| Anahtar Türü | PIR Hareket Sensörü |
| terminal | Vida |
| Malzeme | Acrylonitrile Butadiene Styrene, Copper, Metal, Plastic, Steel |
| Ürün Boyutları (U x G x Y) | 4.6 x 2.87 x 2.24 inç |
| Devre tipi | 1 yönlü (Tek Kutuplu) |
| Montaj Tipi | Duvara Montaj |
| Aktüatör Tipi | PIR hareket sensörü |
| Düşük Sıcaklık Derecesi | 32 Fahrenheit derece (0°C) |
| Üst Sıcaklık Derecesi | 131 Fahrenheit derece (55°C) |
| Denetleyici Türü | Hareket sensörü |
| Kontrol Yöntemi | Otomatik ve Manuel |
| Netage | 600 watts (Incandescent), 300 watts (LED/CFL) |
| Renk | Beyaz |
| Birim Sayısı | 10 Count (for this specific product variant) |
| İletişim Malzemesi | Paslanmaz çelik |
| Uluslararası Koruma Derecelendirmesi | IP40 |
| Şartname Karşılandı | UL; Title 24; FCC |
| Model Numarası (ASIN) | B07R8BKV1K |
9. Garanti Bilgileri
All ECOELER products come with a 1 yıllık garanti from the date of purchase. This warranty covers non-man-made damage under normal use. For any warranty claims or replacement solutions, please contact our support team.
10. Destek
For further assistance, technical support, or to report any issues not covered in this manual, please contact ECOELER customer service. Refer to the product packaging or the ECOELER official webGüncel iletişim bilgileri için siteyi ziyaret edin.