Keenso MPPT Solar Charge Controller User Manual

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your Keenso MPPT Solar Charge Controller. This device is designed to manage the power flow from your solar panel to your battery bank and DC loads, ensuring efficient charging and protection for your system. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Figure 1: Keenso MPPT Solar Charge Controller in a solar power setup.

2. Temel Özellikler

• Otomatik Sistem HacmitagKimlik: Automatically recognizes 12V or 24V system voltage.
• LCD Display and Dual Button Operation: User-friendly interface for easy monitoring and control.
• Yüksek Verimli 3-Stage MPPT Charging: Optimizes battery charging for improved efficiency and lifespan.
• Yük Kontrol Modları: Selectable load control modes, including a timer function for night lighting.
• Working Memory Function: Records system run time, error timers, and full battery charge times.
• Kapsamlı Koruma: Includes reliable overvoltage, short-circuit, overload, and reverse connection protection.
• Doğru Sıcaklık Telafisi: Automatically corrects charging and discharging voltage based on temperature, extending battery life.
• Çift USB Çıkışı: Provides 2.4A x 2 USB ports for charging external devices.

3. Özellikler

Şekil 2: Ürün boyutları.

4. Güvenlik Talimatları

Kurulum ve çalıştırma sırasında lütfen aşağıdaki güvenlik önlemlerine uyun:

• Sistemi çalıştırmadan önce tüm bağlantıların doğru ve güvenli olduğundan emin olun.
• Connect the battery first, then the solar panel, and finally the DC load. Disconnect in the reverse order.
• Do not connect the solar panel to the controller without a battery connected.
• Kontrol cihazını iyi havalandırılan bir alana, doğrudan güneş ışığından, yüksek sıcaklıklardan ve nemden uzak bir yere kurun.
• Use appropriate wire gauges for all connections to prevent overheating and power loss.
• Bu cihaz yalnızca iç mekanda kullanıma uygundur.
• Çocukların erişemeyeceği yerde saklayınız.

5. Kurulum ve Kurulum

5.1 Kontrolörün Montajı

Mount the solar charge controller vertically on a flat, non-flammable surface. Ensure there is adequate airflow around the unit for proper heat dissipation. Avoid mounting near flammable materials or in areas with excessive dust or moisture.

5.2 Kablo Bağlantıları

Follow the connection order carefully to prevent damage to the controller or other components. Always connect the battery first, then the solar panel, and finally the DC load.

1. Pili bağlayın: Connect the positive and negative terminals of the battery to the corresponding battery terminals on the controller. Ensure correct polarity. The controller will automatically detect the system voltage (12V veya 24V).
2. Güneş Panelini Bağlayın: Connect the positive and negative terminals of the solar panel to the corresponding solar panel terminals on the controller. Ensure correct polarity.
3. DC yükü bağlayın: Connect the positive and negative terminals of your DC load to the corresponding load terminals on the controller. Ensure correct polarity.

Important: Disconnect components in the reverse order: Load, then Solar Panel, then Battery.

Figure 3: Wiring diagram for the solar charge controller.

Şekil 4: Ön panel üstüview with LCD and terminals.

6. Kullanım Talimatları

6.1 LCD Ekran

The LCD displays various system parameters, including battery voltage, güneş paneli hacmitage, load current, charging status, and error codes. Use the dual buttons to navigate through the display menus and adjust settings.

6.2 Düğme Fonksiyonları

The controller features two buttons for operation:

• Sol Tuş: Used to scroll through display screens and decrease values during setting adjustments.
• Sağ Buton: Used to enter setting mode, confirm selections, and increase values during setting adjustments.

6.3 Yük Kontrol Ayarları

The load output can be configured for different operating modes. Refer to the on-screen menu for options such as 24-hour output, dusk-to-dawn operation, or timed output. To adjust load settings:

1. Press and hold the Right button to enter the setting menu.
2. Use the Left button to navigate to the load control setting.
3. Press the Right button to select the setting, then use the Left/Right buttons to adjust the value.
4. Press and hold the Right button again to save and exit the setting menu.

6.4 USB Çıkışı

The controller provides two USB 2.4A output ports for charging compatible electronic devices such as mobile phones, tablets, and cameras. These ports are active when the controller is powered.

Figure 5: Dual USB ports for device charging.

7. Bakım

Düzenli bakım, güneş enerjisi şarj kontrol cihazınızın uzun ömürlü olmasını ve en iyi performansı göstermesini sağlar:

• Bağlantıları Kontrol Edin: Tüm kablo bağlantılarını periyodik olarak kontrol ederek sıkı olduklarından ve korozyondan arınmış olduklarından emin olun.
• Kontrol Ünitesini Temizleyin: Kumanda ünitesini temiz tutun ve tozdan ve kirden arındırın. Temizlik için kuru bir bez kullanın. Sıvı kullanmayın.
• Hasarı Kontrol Edin: Cihazda herhangi bir fiziksel hasar olup olmadığını kontrol edin.asing or wiring.
• Havalandırma: Isının düzgün bir şekilde dağılmasını sağlamak için havalandırma açıklıklarının tıkanmadığından emin olun.

8. Sorun Giderme

9. Garanti ve Destek

This Keenso product is covered by a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For more information about Keenso products, you may visit the official Keenso store: Keenso Store