AUTENS SVS09-14-15

AUTENS Kablosuz Kapı Zili Kullanım Kılavuzu

Model: SVS09-14-15

1. Ürün Bittiview

The AUTENS Wireless Doorbell system provides a convenient and reliable solution for home, office, or classroom use. It features a waterproof push button transmitter and a plug-in receiver, offering a long operating range and a variety of customizable settings. This manual will guide you through the installation, operation, and maintenance of your doorbell.

AUTENS Wireless Doorbell Kit

Image 1.1: The AUTENS Wireless Doorbell kit, showing the plug-in receiver and the wireless push button.

AUTENS Wireless Doorbell Operating Range Diagram

Image 1.2: Diagram illustrating the doorbell's operating range of up to 1000 feet in open space, demonstrating signal penetration through walls within a typical home environment.

2. Kurulum Kılavuzu

2.1 Bileşenler

  • 1 x Takılabilir Alıcı
  • 1 x Wireless Push Button Transmitter
  • 1 x 12V 23A Alkaline Battery (pre-installed in push button)
  • Mounting Hardware (Screws, Anchors, Double-sided Tape)

2.2 Adım Adım Kurulum

The push button transmitter can be mounted using either the provided double-sided tape or screws and anchors. The receiver simply plugs into a standard electrical outlet.

Doorbell Installation Instructions

Image 2.1: Visual guide for installing the push button using either double-sided tape or screws and anchors.

Method A: Double-sided Tape Installation

  1. Prepare the Push Button: Open the back cover of the push button transmitter. Ensure the 12V 23A battery is correctly installed.
  2. Bant uygulayın: Peel off one side of the protective film from the double-sided tape and firmly attach it to the back of the push button.
  3. Konum seç: Select a clean, flat surface near your entry door or gate. Ensure the surface is dry and free of dust or grease.
  4. Mount Button: Peel off the other side of the protective film from the tape. Press the push button firmly onto the chosen surface for at least 30 seconds to ensure strong adhesion.
Push Button Installation with Double-sided Tape

Resim 2.2: Yakın çekim view of the push button being installed using double-sided adhesive tape.

Method B: Screw and Anchor Installation

  1. Prepare the Push Button: Open the back cover of the push button transmitter. Ensure the 12V 23A battery is correctly installed.
  2. Matkap Deliklerini İşaretleyin: Hold the back plate of the push button against the desired mounting surface. Use a pencil to mark the positions for the two screw holes.
  3. Matkap Delikleri: Drill two small holes at the marked positions. Insert the plastic anchors into the drilled holes.
  4. Güvenli Arka Plaka: Align the back plate with the anchors and secure it using the provided screws.
  5. Attach Push Button: Snap the push button onto the secured back plate.
Push Button Installation with Screws

Image 2.3: Detailed steps for installing the push button using screws and wall anchors for a more permanent fixture.

2.3 Alıcı Kurulumu

Simply plug the receiver into any standard electrical outlet within range of the push button. For optimal performance, choose an outlet that is centrally located or closer to the push button, avoiding large metal objects or thick walls that may interfere with the signal.

Doorbell Receiver in Use

Image 2.4: The doorbell receiver plugged into a wall outlet, indicating its readiness for use in a home setting.

3. Operasyon

Your AUTENS Wireless Doorbell offers various customization options for melodies and volume levels.

Doorbell Receiver Controls

Resim 3.1: Arka view of the receiver showing the Ringtone Button and Volume Button, along with an illustration of the 36 melodies and 4 volume levels (0dB to 80dB).

3.1 Adjusting Melodies

The receiver comes with 36 selectable melodies. To change the melody:

  • Press the "Ringtone Button" on the side of the receiver to cycle through the available melodies.
  • Stop pressing when you hear your desired melody. The receiver will remember this selection.

3.2 Ses Seviyelerinin Ayarlanması

The receiver has 4 adjustable volume levels, ranging from 25 dB to 80 dB.

  • Press the "Volume Button" on the side of the receiver to cycle through the volume levels.
  • Ortamınıza en uygun ses seviyesini seçin.

3.3 Silent Mode and LED Indicator

A silent mode is available for times when you prefer not to be disturbed. Even in silent mode, the LED indicator on both the push button and receiver will flash when the button is pressed, providing a visual alert. This feature is particularly useful for individuals with hearing impairments.

3.4 Pairing Additional Units (Expandable System)

The AUTENS doorbell system is expandable, allowing you to pair additional receivers or push buttons. Follow these steps to pair new units:

  1. Alıcıyı prize takın: Plug the receiver you wish to pair into an electrical outlet.
  2. Eşleştirme Moduna Girin: Press and hold the "Volume Button" on the receiver. Do not release it.
  3. Press Transmitter: While still holding the Volume Button on the receiver, press the push button transmitter you want to pair. You should hear a chime from the receiver, indicating successful pairing.
  4. Serbest Bırakma Düğmesi: Release the Volume Button on the receiver.
  5. Repeat for Multiple Transmitters/Receivers: If pairing multiple transmitters to one receiver, repeat steps 2-4 for each additional transmitter. If pairing multiple receivers, repeat steps 1-4 for each additional receiver.

4. Bakım ve Onarım

Proper care ensures the longevity and optimal performance of your doorbell system.

  • Temizlik: Wipe the receiver and push button with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Push Button Battery Replacement: The push button uses a 12V 23A alkaline battery, which typically lasts about 1 year. If the LED indicator on the push button does not light up or the signal range decreases significantly, it may be time to replace the battery. To replace, open the back cover of the push button, remove the old battery, and insert a new 12V 23A battery, observing polarity.
  • Su Geçirmezlik Derecesi: The remote transmitter button is rated IP44 dustproof and waterproof, suitable for outdoor use. However, avoid submerging it in water or exposing it to extreme pressure washing.
  • Çalışma Sıcaklığı: The unit is functional between -30°C to 70°C (-22°F to 158°F).
IP44 Waterproof Rating and Temperature Range

Image 4.1: Illustration highlighting the IP44 waterproof rating of the push button and its working temperature range of -30°C to 70°C.

5. Sorun Giderme

If you encounter issues with your doorbell, refer to the table below for common problems and solutions.

SorunOlası NedenÇözüm
Telefon çalmıyor.Alıcı fişten çekilmiş veya güç kesilmiştage. Push button battery low or dead. Units not paired.Ensure receiver is securely plugged into a working outlet. Replace 12V 23A battery in push button. Re-pair the push button and receiver as per Section 3.4.
Short operating range or intermittent signal.Obstructions (thick walls, metal objects). Interference from other wireless devices. Low push button battery.Relocate receiver or push button to minimize obstructions. Ensure receiver is not near large metal appliances. Replace push button battery.
Melodi veya ses seviyesi ayarları sıfırlandı.Power interruption to receiver.Re-select your desired melody and volume settings. The receiver should retain settings after minor power fluctuations.
Push button LED does not light up.Push button battery is dead or incorrectly installed.Replace the 12V 23A battery, ensuring correct polarity.

6. Teknik Özellikler

ÖzellikŞartname
Model NumarasıSVS09-14-15
Çalışma AralığıAçık alanda 1000 feet'e (300 metre) kadar
Melodiler36 seçilebilir zil sesi
Ses Seviyeleri4 seviye (25 dB ila 80 dB)
Ses Seviyesi100 dB (maksimum)
Düğmeli Pil1 adet 12V 23A Alkalin Pil (dahil)
Average Battery Life (Push Button)Yaklaşık 1 yıl
Su Geçirmezlik Derecesi (Düğmeyle Basma)IP44
Çalışma Sıcaklığı-30°C ila 70°C (-22°F ila 158°F)
MalzemePlastik
RenkBeyaz
Ürün Ağırlığı100 gr
Parsel Boyutları11.94 x 9.14 x 7.37 cm (4.7 x 3.6 x 2.9 inç)
Kapı Zili Boyutları

Image 6.1: Diagram showing the dimensions of both the receiver and the push button in inches.

7. Garanti ve Destek

7.1 İade Politikası

Bu ürün, standart perakende satış şartlarına göre 30 günlük iade veya değişim politikasına tabidir.

7.2 Müşteri Desteği

For further assistance, technical support, or inquiries regarding your AUTENS Wireless Doorbell, please contact the manufacturer directly or visit the official AUTENS store page:

Visit the AUTENS Store on Amazon

© 2024 AUTENS. Tüm hakları saklıdır.

İlgili Belgeler - SVS09-14-15

Önview AVANTEK Kapı Zili Kiti Kullanım Kılavuzu - Kurulum ve İşletim Kılavuzu
AVANTEK Kablosuz Kapı Zili Kiti için kapsamlı kullanım kılavuzu. 52 melodi ve 300 m menzile sahip, pille çalışan, IP55 sertifikalı bu kapı zili için kurulum, özellikler, çalışma ve sorun giderme hakkında bilgi edinin.
Önview TRANSNECT BC108 Kablosuz Kapı Zili Kullanım Kılavuzu
TRANSNECT BC108 kablosuz görüntülü kapı zili için kapsamlı kullanım kılavuzu; giriş, paket içeriği, uyarılar, kurulum, teknik özellikler, bakım, saklama, geri dönüşüm, servis ve garanti bilgilerini kapsamaktadır.
Önview Novete Kablosuz Kapı Zili Kiti Kullanım Kılavuzu
52 melodi, ayarlanabilir ses seviyesi ve 1300 metre iletim menzili sunan Novete Kablosuz Kapı Zili Kiti'nin kullanım kılavuzu. Kurulum, çalıştırma, bakım ve sorun giderme talimatlarını içerir.
Önview PHYSEN Kablosuz Kapı Zili CW Kullanım Kılavuzu - Kurulum, Özellikler, Sorun Giderme
PHYSEN Kablosuz Kapı Zili (CW modeli) için kapsamlı kullanıcı kılavuzu. Bu uzun menzilli, genişletilebilir kapı zili sisteminin kurulumu, özellikleri, teknik özellikleri, sorun giderme ve zil seçenekleri hakkında bilgi edinin.
Önview Mübview Bell-J7 Akıllı Görüntülü Kapı Zili Hızlı Başlangıç ​​Kılavuzu
Bu kılavuz, Mub'u kurma ve kullanma talimatlarını sağlarview Bell-J7 Akıllı Görüntülü Kapı Zili ve beraberindeki zil. Şarj, güç kaynağı, uygulama kurulumu, eşleştirme, montaj ve diğer tüm işlemleri kapsar.amper uyarı ayarları ve ürün özellikleri.
Önview TECKNET Kablosuz Kapı Zili HWD01990 Kullanım Kılavuzu
User manual for the TECKNET Wireless Doorbell, model HWD01990. Includes package contents, product overview, specifications, installation instructions, pairing methods, safety instructions, warranty information, and compliance statements.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.