Onset HOBO H21-USB Micro Station Data Logger User Manual

1. Giriş

The Onset HOBO H21-USB Micro Station is a compact, weatherproof data logger designed for multi-channel monitoring of environmental conditions. This battery-powered station supports up to five plug-and-play Smart Sensors, making it suitable for a wide range of indoor and outdoor applications. Its robust design and built-in USB interface ensure efficient data collection and offload.

Temel Özellikler:

• Compact size for easy deployment in various environments.
• Five smart sensor inputs for versatile data collection.
• Wide range of compatible plug-and-play smart sensors.
• Integrated USB interface for direct data offload to PC or Mac.
• Weatherproof IP66 enclosure for harsh outdoor conditions.
• Hinged door and integrated mounting tabs for simple installation.

Figure 1: Onset HOBO H21-USB Micro Station Data Logger. This image shows the compact, grey data logger unit with its hinged door closed, highlighting its robust design.

2. Paket İçeriği

Kuruluma devam etmeden önce pakette tüm öğelerin mevcut olduğundan emin olun:

• HOBO H21-USB Micro Station Data Logger
• USB kablosu
• Kullanım Kılavuzu (bu belge)
• (Note: Smart Sensors are sold separately and are not included with the base unit.)

3. Kurulum

3.1. Yazılım Kurulumu

Before deploying the HOBO H21-USB, install the necessary HOBOware software on your computer. HOBOware is required for configuring the logger, launching deployments, and offloading data.

1. Download the latest version of HOBOware from the official Onset webalan: www.onsetcomp.com/support/software
2. Follow the on-screen instructions to complete the installation for your Windows PC or Mac operating system.
3. Connect the HOBO H21-USB to your computer using the provided USB cable. The software should recognize the device automatically.

3.2. Physical Installation and Sensor Connection

The H21-USB Micro Station is designed for easy deployment. Ensure the installation location is suitable for the sensors being used and provides adequate protection from extreme conditions beyond the logger's specifications.

1. Open the hinged door of the Micro Station.
2. Connect up to five compatible Smart Sensors into the available ports. Ensure each sensor is securely plugged in.
3. Close the hinged door firmly to maintain the weatherproof seal.
4. Use the integrated mounting tabs to secure the logger to a pole, post, or flat surface using screws or zip ties (not included). Ensure the logger is mounted in a way that does not obstruct sensor readings or expose it to unnecessary physical stress.

4. Kullanım Talimatları

4.1. Configuring and Launching a Deployment

Use HOBOware software to configure the logging parameters and start a new data collection session.

1. Connect the HOBO H21-USB to your computer via USB.
2. Open HOBOware software.
3. From the HOBOware menu, select Device > Launch.
4. Configure the desired logging parameters, including:
   • Günlük Aralığı: How frequently data is recorded (e.g., every 5 minutes).
   • Başlangıç ​​Saati: Immediate, at a specific date/time, or on button push.
   • Durma zamanı: When memory is full, at a specific date/time, or never (manual stop).
   • Sensör Yapılandırması: Enable/disable connected sensors and set specific sensor parameters if applicable.
5. Tıklamak Başlangıç to launch the deployment. The logger will begin recording data according to your settings.

4.2. Data Offload and Analysis

Once a deployment is complete or you wish to retrieve data, follow these steps:

1. Connect the HOBO H21-USB to your computer via USB.
2. Open HOBOware software.
3. From the HOBOware menu, select Device > Readout.
4. The software will offload the recorded data from the logger.
5. Veriyi sakla file to your computer. HOBOware allows you to view, plot, and export the data in various formats (e.g., CSV, Excel) for further analysis.

5. Bakım

5.1. Pil Değişimi

The HOBO H21-USB is powered by user-replaceable batteries. Refer to the specifications for the correct battery type. Replace batteries when the low battery indicator appears in HOBOware or if the logger fails to power on.

1. Ensure the logger is not actively logging data. If it is, stop the deployment and offload any critical data.
2. Open the hinged door and locate the battery compartment.
3. Carefully remove the old batteries and dispose of them according to local regulations.
4. Kutupların doğru olmasına dikkat ederek yeni pilleri takın.
5. Close the battery compartment and the hinged door securely.

5.2. Temizleme ve Saklama

Regular cleaning and proper storage ensure the longevity and accuracy of your data logger.

• Wipe the exterior of the logger with a damp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Ensure all ports and seals are free of dirt and debris.
• When not in use, store the logger in a cool, dry place away from direct sunlight and extreme temperatures.
• Uzun süre saklayacaksanız, sızıntıyı önlemek için pilleri çıkarın.

6. Sorun Giderme

This section addresses common issues you might encounter with your HOBO H21-USB Micro Station.

If you encounter issues not covered here, please refer to the Onset support websitesine bakın veya teknik destekle iletişime geçin.

7. Özellikler

8. Garanti ve Destek

8.1. Ürün Garantisi

Onset products are typically covered by a limited warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary. Please refer to the warranty information provided with your purchase documentation or visit the official Onset webAyrıntılı garanti politikaları için siteyi ziyaret edin.

This warranty generally covers the repair or replacement of defective units, but does not cover damage caused by misuse, improper installation, unauthorized modification, or natural disasters.

8.2. Teknik Destek

For technical assistance, troubleshooting, or questions regarding your HOBO H21-USB Micro Station, please contact Onset Technical Support.

• Çevrimiçi destek: Visit the Onset support website for FAQs, knowledge base articles, and software downloads: www.onsetcomp.com/support
• İletişim Bilgileri: Refer to the Onset website for current phone numbers and email addresses for technical support.

When contacting support, please have your product model (H21-USB) and a detailed description of the issue ready.