Flamaker 4-Piece Outdoor Patio Bistro Set

Önemli Güvenlik Bilgileri

Montaj ve kullanımdan önce lütfen tüm talimatları okuyun ve anlayın. Bu kılavuzu ileride başvurmak üzere saklayın.

• Do not exceed the maximum weight capacity of 330 pounds per seating unit.
• Exercise caution around sharp edges during the assembly process.
• This furniture is not heat-resistant. Avoid placing hot items directly on surfaces without protection.
• Kullanmadan önce tüm cıvata ve vidaların iyice sıkıldığından emin olun. Periyodik olarak kontrol edin ve gerektiğinde tekrar sıkın.
• Mobilyalarınızı devrilmesini önlemek için düz ve sağlam bir zemine yerleştirin.

Paket İçeriği

Montaja başlamadan önce aşağıda listelenen tüm bileşenlerin mevcut olduğundan emin olun. Herhangi bir parça eksik veya hasarlıysa, lütfen müşteri desteğiyle iletişime geçin.

Resim: Üzeriview of all components and hardware for assembly.

Parça Listesi:

• 1 x Loveseat Frame
• 2 x Single Chair Frames
• 1 x Coffee Table Frame
• 1 x Temperli Cam Masa Üstü
• Textilene Fabric for Loveseat Seat and Back
• Textilene Fabric for Single Chair Seats and Backs (2 sets)

Donanım Listesi:

• Cıvatalar (çeşitli boyutlarda)
• Yıkayıcılar
• Fındık
• Allen Wrench (Assembly Tool)
• Suction Cups for Glass Tabletop
• Screw Full Covers

Montaj Talimatları

Follow these steps carefully to assemble your Flamaker 4-Piece Outdoor Patio Bistro Set. It is recommended to assemble on a soft, clean surface to prevent scratches.

Step 1: Assemble the Single Chairs

1. Attach the backrest frame to the seat frame using the provided bolts and washers. Do not fully tighten yet.
2. Connect the armrests to the assembled seat and backrest. Ensure all holes align.
3. Once all components are loosely connected, place the chair on a flat surface and gradually tighten all bolts evenly.
4. Install the screw full covers over exposed bolt heads for a finished look and protection.

Image: Step-by-step assembly for a single chair.

Step 2: Assemble the Loveseat

1. Attach the two backrest sections to the loveseat seat frame using the appropriate bolts and washers.
2. Connect the side armrest frames to the main loveseat structure.
3. Ensure all parts are aligned, then place the loveseat on a flat surface and tighten all bolts securely and evenly.
4. Apply screw full covers to all exposed bolt heads.

Image: Step-by-step assembly for the loveseat.

Step 3: Assemble the Coffee Table

1. Attach the four legs to the table frame using the provided hardware. Do not fully tighten.
2. Ensure the frame is stable and level, then tighten all bolts.
3. Place the suction cups into the designated holes on the table frame.
4. Carefully place the tempered glass tabletop onto the suction cups, ensuring it is centered and secure.

Image: Step-by-step assembly for the coffee table.

Bakım ve Onarım

Proper care will extend the life and appearance of your patio set.

• Temizlik: Reklamla silamp cloth for general cleaning. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
• Textilene Fabric: The breathable Textilene material is easy to clean. Simply wipe it down with a damp Kumaş.
• Powder-Coated Steel Frame: The powder-coated finish helps resist rust. Clean with a damp Kumaşı aşındırmayın. Cilaya zarar verebilecek aşındırıcı temizleyicilerden veya sert kimyasallardan kaçının.
• Cam Masa Üstü: Clean with a standard glass cleaner and a soft cloth.
• Mevsimsel Depolama: During harsh weather conditions (heavy rain, snow, extreme cold), it is recommended to store the furniture indoors or cover it with a protective outdoor furniture cover to prevent damage and prolong its lifespan.
• Düzenli Muayene: Tüm cıvata ve bağlantıların sıkı kaldığından emin olmak için periyodik olarak kontrol edin. Stabilite ve güvenliği sağlamak için gerektiğinde yeniden sıkın.

Sorun giderme

Montaj veya kullanım sırasında sorunlarla karşılaşırsanız, aşağıdaki yaygın çözümlere bakın:

• Sallanan Masa/Sandalyeler: Ensure all bolts are fully and evenly tightened. Sometimes, loosening all bolts slightly, placing the furniture on a flat surface, and then tightening them in a cross-pattern can help level the unit. Check that all protective feet are properly installed.
• Delikleri Hizalamada Zorluk: Do not fully tighten any bolts until all components are loosely assembled. This allows for minor adjustments. If a hole is severely misaligned, check if a part is oriented incorrectly.
• Eksik veya Hasarlı Parçalar: If any parts are missing or damaged upon arrival, do not proceed with assembly. Contact Flamaker customer support immediately for assistance.
• Zemindeki Çizikler: The chairs feature a bending design for easy movement. Ensure you lift the chairs rather than dragging them to prevent scratches on your floor or patio surface.

Özellikler

Image: Dimensions of the Flamaker 4-Piece Outdoor Patio Bistro Set components.

Garanti ve Destek

For warranty information, please refer to the documentation included with your product packaging or contact Flamaker customer support directly. Flamaker offers various protection plans for extended coverage, which can be found on the product's purchase page.

If you require assistance with assembly, missing parts, or have any questions regarding your Flamaker 4-Piece Outdoor Patio Bistro Set, please contact Flamaker customer service. You can often find contact details on the manufacturer's websitenizden veya perakendeciniz aracılığıyla.

For additional product information and to explore other Flamaker products, visit the official Flamaker Store online.