Sharp Atomic Clock Instruction Manual

giriiş

The Sharp Atomic Clock provides precise timekeeping and temperature monitoring for your home or office. Featuring a large, easy-to-read display, this clock automatically synchronizes with the atomic time signal (WWVB) broadcast from Fort Collins, Colorado, ensuring accuracy without manual adjustments. It also includes a wireless outdoor sensor to display both indoor and outdoor temperatures.

Ürün Özellikleri

• Atomik Zaman Doğruluğu: Automatically synchronizes with the WWVB atomic time signal for precise timekeeping.
• Jumbo 3" Easy-to-Read Numbers: Large digital display for clear visibility of time, date, and temperature.
• Indoor/Outdoor Temperature Display: Monitors both indoor ambient temperature and outdoor temperature via a wireless sensor.
• Kablosuz Dış Mekan Sensörü: Transmits outdoor temperature data to the main unit.
• Pil ile çalışır: Operates on batteries for flexible placement (batteries not included).
• Otomatik Yaz Saati Uygulaması (DST) Ayarlaması: Automatically adjusts for daylight saving time changes.
• Seçilebilir Saat Dilimleri: Allows selection of various US time zones.
• 12/24 Saat Formatı: Zamanı 12 veya 24 saatlik formatta görüntüleme seçeneği.
• Celsius/Fahrenheit Display: Santigrat ve Fahrenheit sıcaklık birimleri arasında geçiş yapın.

Paket İçeriği

Kurulum işlemine başlamadan önce lütfen tüm öğelerin eksiksiz olduğundan emin olun.

• Sharp Atomic Clock Main Unit
• Kablosuz açık sensörü
• Kullanım Kılavuzu

Note: Batteries are not included. The main unit requires 2 AA batteries, and the outdoor sensor requires 2 AA batteries.

Kurmak

1. Pil Kurulumu

1. Open the battery compartment on the back of the main clock unit.
2. Insert 2 AA batteries, observing the correct polarity (+ and -).
3. Pil bölmesinin kapağını kapatın.
4. Open the battery compartment on the wireless outdoor sensor.
5. Insert 2 AA batteries into the outdoor sensor, observing the correct polarity.
6. Close the outdoor sensor's battery compartment cover.

2. İlk Senkronizasyon ve Ayarlar

After battery installation, the clock will attempt to receive the WWVB atomic time signal and connect to the outdoor sensor. This process may take several minutes or up to 24 hours depending on your location and environmental interference.

• Saat Dilimi: Press the "TIME ZONE" button (often labeled "UP TIME ZONE") on the back of the clock to cycle through available time zones (PST, MST, CST, EST). Select your desired time zone.
• 12/24 Saat Formatı: Press the "12/24" button to switch between 12-hour and 24-hour display.
• Santigrat derece Fahrenhayt: Press the "°C/°F" button to toggle between Celsius and Fahrenheit temperature display.
• Outdoor Sensor Pairing: If the outdoor temperature does not appear, press the "CHANNEL" button on the main unit to search for the sensor signal. Ensure the outdoor sensor is within range and not obstructed.

For optimal signal reception, place the clock away from large metal objects, electronic devices, and areas with heavy concrete or brick walls. The outdoor sensor should be placed in a shaded, dry location, protected from direct sunlight and precipitation, for accurate readings.

Image: The Sharp Atomic Clock main unit displaying time, indoor temperature, date, and outdoor temperature, alongside its wireless outdoor sensor.

Operasyon

Bilgiyi Görüntüle

The clock's large LCD screen displays the following information:

• Zaman: Current time in selected 12-hour or 24-hour format.
• PM Göstergesi: Displays "PM" for afternoon hours in 12-hour format.
• Atomic Signal Indicator: Shows the status of the WWVB atomic time signal reception.
• İç Mekan Sıcaklığı: Current temperature measured by the main unit.
• Month/Date/Day: Current calendar information.
• Dış Ortam Sıcaklığı: Current temperature measured by the wireless outdoor sensor.
• Outdoor Sensor Channel: Indicates the channel the outdoor sensor is transmitting on.
• Düşük Pil Göstergesi: An icon will appear when batteries are low and need replacement.

Button Functions (Rear Panel)

Bakım

• Pil Değişimi: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones.
• Temizlik: Clean the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Dış Mekan Sensörünün Yerleştirilmesi: Periodically check the outdoor sensor's location to ensure it remains protected from extreme weather conditions, direct sunlight, and moisture.

Sorun giderme

• Clock not syncing with atomic time:
  • Ensure the clock is placed away from electronic interference (TVs, computers, microwaves).
  • Try placing the clock near a window facing Fort Collins, Colorado (if applicable to your region).
  • Press the "WAVE" button to initiate a manual signal search.
  • İlk senkronizasyon için 24 saate kadar süre tanıyın.
• Outdoor temperature not displaying or incorrect:
  • Check batteries in the outdoor sensor.
  • Ensure the outdoor sensor is within the effective transmission range (typically up to 100 feet, line of sight).
  • Press the "CHANNEL" button on the main unit to re-establish connection.
  • Verify the outdoor sensor is placed in a location protected from direct sunlight and rain, which can affect readings.
• Ekran loş veya boş:
  • Replace all batteries in the main unit with fresh ones.
  • Pillerin doğru kutuplara yerleştirildiğinden emin olun.
• Yanlış saat veya tarih:
  • Doğru saat diliminin seçildiğinden emin olun.
  • Check if Daylight Saving Time (DST) setting is correct for your region.
  • If atomic signal is not received, manually set the time and date using the "TIME" and "CALENDAR" buttons.

Özellikler

Garanti ve Destek

Sharp products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Sharp webSite. Satın alma fişinizi, garanti talepleriniz için satın alma belgeniz olarak saklayın.