Steinel L 840 SC

Steinel L 840 SC LED Outdoor Wall Light Instruction Manual

Modeli: L 840SC | Marka: Çelik

1. Giriş

The Steinel L 840 SC is an advanced LED outdoor wall light designed for modern exterior illumination. It features an integrated 160° high-frequency motion detector and smart control capabilities via the Steinel Connect app. This light provides warm white illumination and offers various customizable settings for enhanced security and convenience around your home, pathways, garden, and patio.

2. Güvenlik Talimatları

  • Elektriksel Güvenlik: Installation must be performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.
  • Güç Bağlantısının Kesilmesi: Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or repair work.
  • Açık Hava Kullanımı: This product is designed exclusively for outdoor use. Ensure proper sealing and weather protection during installation.
  • Montaj yüzeyi: Mount the light on a stable, flat surface that can support its weight.
  • Çalışma Hacmitage: Güç kaynağı hacmini sağlayıntage, ürünün belirtilen hacmiyle eşleşir.tage (220-240 V).
  • Non-Replaceable LED: The LED light source is integrated and cannot be replaced. Do not attempt to open the LED module.

3. Paket İçeriği

Lütfen tüm parçaların eksiksiz ve hasarsız olduğundan emin olun:

  • Steinel L 840 SC LED Dış Mekan Duvar Lambası
  • Mounting material (3 screws, 3 wall plugs, 3 spacers)
  • Kullanıcı Kılavuzu

4. Kurulum ve Kurulum

The Steinel L 840 SC is designed for wall mounting. Ensure the chosen location provides optimal coverage for the motion sensor and is within reach of the electrical supply.

4.1 Montaj Yeri Seçimi Hususları

  • Yükseklik: For optimal motion detection, mount the light at a height of approximately 1.8 to 2.5 meters.
  • Sensör Aralığı: The 160° high-frequency sensor has a range of up to 5 meters. Consider the desired detection area when positioning.
  • obstrüksiyonlar: Avoid mounting near large metal objects, dense foliage, or other sources of interference that might affect sensor performance.

4.2 Kurulum Adımları

  1. Gücü Kesin: Turn off the main power supply to the installation area at the circuit breaker. Verify that the power is off using a voltage test cihazı.
  2. Montaj Yüzeyini Hazırlayın: Mark the drilling points on the wall using the light fixture as a template. Drill holes and insert the provided wall plugs.
  3. Kablolama: Connect the electrical wires (Live, Neutral) from your household wiring to the corresponding terminals on the light fixture. Ensure secure connections.
  4. Fikstürü Takın: Secure the light fixture to the wall using the provided screws and spacers. Ensure it is firmly attached.
  5. Gücü Geri Yükle: Once installation is complete and all connections are secure, restore power at the circuit breaker. The light will perform an initial self-test.
Steinel L 840 SC LED Dış Mekan Duvar Lambası

Figure 1: Steinel L 840 SC LED Outdoor Wall Light. This image shows the anthracite-colored wall light, highlighting its compact and modern design.

Steinel L 840 SC Anthracite Wall Light in an outdoor setting

Figure 2: The L 840 SC light installed on an exterior wall, providing illumination to a patio area at night. This demonstrates its aesthetic integration and functional lighting.

5. Kullanım Talimatları

The Steinel L 840 SC is primarily controlled and configured via the Steinel Connect app.

5.1 Steinel Connect App

The free Steinel Connect app allows you to customize various settings of your L 840 SC light.

  1. Uygulamayı indirin: Download the "Steinel Connect" app from the Google Play Store (for Android devices) or the Apple App Store (for iOS devices).
  2. Eşleştirme: Follow the in-app instructions to pair your L 840 SC light via Bluetooth. Ensure Bluetooth is enabled on your smartphone.
  3. Yapılandırma: Once paired, you can access and adjust the following settings:
  • Hareket Sensörü Ayarları: Adjust the detection range (up to 5m) and sensitivity in 3 directions to fine-tune motion detection. The sensor is designed to ignore small animals and swaying branches.
  • Işık Süresi: Set how long the main light stays on after motion is detected.
  • Alacakaranlık Ortamı: Define the ambient light level at which the sensor becomes active.
  • Night Light (Basic Light): Enable a continuous low-level illumination (10% to 50% brightness) during darkness for constant ambient lighting.
  • Sürekli Işık: Activate a 4-hour continuous full brightness mode for extended illumination when needed.
  • Dimmable Main Light: Adjust the brightness of the main light output from 50% to 100%.
  • Light Groups (Bluetooth Mesh): Connect multiple Steinel Connect lights to create groups and control them simultaneously for synchronized lighting scenarios.
Steinel Connect App Smart Control Interface

Figure 3: Screenshot of the Steinel Connect app interface, demonstrating the various settings available for controlling the light fixture.

Steinel Bluetooth Mesh Network for Multiple Lights

Figure 4: Diagram illustrating how multiple Steinel Connect lights can form a Bluetooth Mesh network for synchronized control.

5.2 Hareket Sensörünün Çalışması

The L 840 SC features an invisible 160° high-frequency sensor that reliably detects human movement.

  • Algılama Prensibi: The sensor emits high-frequency electromagnetic waves and detects changes in the echo caused by movement within its detection zone.
  • Akıllı Algılama: It is optimized to differentiate between human movement and smaller disturbances like pets or wind-blown foliage, reducing false triggers.
  • Ayarlanabilir Aralık: The detection range can be precisely adjusted via the app to suit the specific requirements of your installation area.
Steinel High-Frequency Sensor Detection Pattern

Figure 5: Visual representation of the high-frequency sensor's detection pattern, showing how it emits waves to detect movement.

Steinel Motion Detection Range Diagram

Figure 6: Diagram illustrating the typical motion detection range of the sensor in an outdoor environment, showing its coverage area.

6. Bakım

The Steinel L 840 SC is designed for low maintenance. The integrated LED system has a long lifespan of approximately 50,000 hours, meaning bulb replacement is not required.

  • Temizlik: To clean the fixture, wipe it with a soft, damp Bez kullanın. Yüzeye zarar verebileceğinden aşındırıcı temizleyiciler veya çözücüler kullanmayın.
  • Denetleme: Periyodik olarak armatürü hasar veya gevşek bağlantı belirtileri açısından kontrol edin. Herhangi bir sorun tespit edilirse, elektriği kesin ve yetkili bir elektrikçiye danışın.

7. Sorun Giderme

Steinel L 840 SC cihazınızda sorun yaşıyorsanız, aşağıdaki yaygın sorun giderme adımlarına bakın:

SorunOlası NedenÇözüm
Işık açılmıyor.No power supply; incorrect wiring; twilight setting too high.Check circuit breaker; verify wiring connections; adjust twilight setting in the app.
Işık sürekli açık kalır.Continuous light mode activated; constant motion in detection area; faulty sensor.Deactivate continuous light in the app; check for persistent movement; contact support if sensor is faulty.
Sensor does not detect motion.Detection range too small; sensor obstructed; incorrect sensitivity setting.Increase detection range in the app; clear obstructions; adjust sensor sensitivity.
Uygulamaya bağlanılamıyor.Bluetooth off; light not in pairing mode; app issues.Ensure Bluetooth is on; restart the light; restart the app or reinstall it.

8. Özellikler

ÖzellikŞartname
Model Numarası055530
Boyutlar (U x G x Y)11x11x13.4 cm
Ağırlık0.504 kilo
Güç Kaynağı220-240 V / 50-60 Hz
Netage9.1 Watt
Işık Akısı319 lm
Açık RenkSıcak Beyaz (3000 K)
LED Ömrü50,000 saat
Hareket Sensörü160° High-Frequency (invisible)
Algılama Aralığı5 metreye kadar
BağlantıBluetooth
Kontrol YöntemiSteinel Connect App (iOS/Android)
MalzemeUV-resistant Plastic
RenkAntrasit
Koruma SınıfıWaterproof (specific IP rating not provided, but implied by 'waterproof')
Kurulum TürüDuvara Montaj
Öğe ŞekliDikdörtgen

9. Garanti ve Destek

Steinel products are manufactured to high-quality standards and undergo rigorous testing. For specific warranty information, please refer to the warranty card included with your product or visit the official Steinel webalan.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Steinel customer support through their official website veya ürün ambalajınızda yer alan iletişim bilgileri.

Steinel Tap Duo C Wireless Switch Accessory

Figure 7: The Steinel Tap Duo C wireless switch, an optional accessory that can be used to control Steinel Connect lights.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.