giriiş
This manual provides essential instructions for the safe and effective use of the GÜDE 55369 GHF 800 Manual Tile Cutter. Please read these instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.
Güvenlik Talimatları
Always prioritize safety when operating any tools. Failure to follow these instructions may result in injury or damage to the tool.
- Güvenlik gözlüğü ve eldiven gibi uygun kişisel koruyucu ekipman (KKD) giyin.
- Ensure the work surface is stable, level, and clean.
- Çocukları ve etraftaki kişileri çalışma alanından uzak tutun.
- Inspect the tile cutter for any damage before each use. Do not use if damaged.
- Handle tiles carefully; edges can be sharp after cutting.
- Kesme tekerleğini zorlamayın. Sabit ve eşit basınç uygulayın.
- Ensure the tile is properly secured on the anti-slip support before cutting.
Bileşenlerview
Familiarize yourself with the parts of your GÜDE GHF 800 Manual Tile Cutter.
- Kesme Sapı: Konforlu kullanım için ergonomik olarak tasarlanmıştır.
- Kesme Çarkı: Hardened tungsten carbide wheel for precise scoring.
- Guide Rail: Provides a stable path for the cutting head.
- Taban Plakası: Stable aluminum base for secure tile placement.
- Anti-slip Support: Ensures the tile remains stationary during cutting.
- Adjustable Stop/Angle Guide: For precise measurement and angled cuts.
- Fold-out Tile Supports: Extendable supports on both sides for larger tiles.
Kurmak
Before using the tile cutter, ensure it is properly set up.
- Paketin açılması: Tüm bileşenleri ambalajından dikkatlice çıkarın. Nakliye sırasında herhangi bir hasar olup olmadığını kontrol edin.
- Atama: Place the tile cutter on a stable, flat, and clean work surface. Ensure there is enough space around the cutter for safe operation and tile handling.
- Extend Tile Supports: For larger tiles, unfold the side tile supports (30 cm each) to provide additional stability.
Şekil 2: Fold-out tile support. This image shows one of the side supports extended, providing additional surface area for larger tiles. - Ayarlanabilir Durdurucu: Position the adjustable stop according to the desired tile dimension. Secure it firmly.
Şekil 3: Tile placement and adjustable stop. This image illustrates a tile positioned on the cutter, with the adjustable stop set for a precise cut, indicating a maximum tile size of 80x80 cm.
Operasyon
Follow these steps for effective and safe tile cutting.
- Karoyu hazırlayın: Karo yüzeyini temizleyin. İstenilen kesim çizgisini bir kalem veya işaretleyici ile net bir şekilde işaretleyin.
- Karoyu Yerleştirin: Place the tile on the base plate, aligning the marked cut line with the cutting wheel's path. Ensure the tile rests firmly against the anti-slip support and the adjustable stop.
Şekil 4: Tile positioning for a straight cut. This image shows a tile correctly placed on the cutter, ready for the scoring process. - Karoyu Puanla:
- Position the cutting wheel at the edge of the tile furthest from you.
- Apply firm, consistent downward pressure on the cutting handle.
- Push the cutting handle smoothly and steadily across the tile towards you in a single, continuous motion. Do not make multiple passes. A distinct scoring sound should be heard.
Şekil 5: Scoring the tile. This image focuses on the cutting wheel as it scores a line across the tile surface. - Karoyu Kır:
- Once the tile is scored, position the breaking foot (part of the cutting head) directly over the scored line, near the edge of the tile closest to you.
- Apply quick, firm downward pressure on the cutting handle. The tile should snap cleanly along the scored line.
- For diagonal cuts, use the angle guide and ensure the tile is securely placed.
Şekil 6: Performing a diagonal cut. This image demonstrates the tile cutter being used to make an angled cut on a tile. - Bitirme: Carefully remove the cut tile pieces. Edges may be sharp and may require light sanding or filing for a smooth finish.
Bakım
Regular maintenance ensures the longevity and performance of your tile cutter.
- Temizlik: After each use, clean the base plate, guide rails, and cutting head to remove tile dust and debris. Use a dry cloth or brush.
- Yağlama: Periodically apply a light lubricant to the guide rails and the cutting wheel axle to ensure smooth operation.
- Kesme Çarkı: The tungsten carbide cutting wheel is durable but will eventually wear out. Replace the cutting wheel when cuts become inconsistent or require excessive force.
Şekil 7: Hardened cutting wheel and ergonomic handle. This image provides a detailed view of the durable cutting wheel and the comfortable grip of the handle. - Depolamak: Store the tile cutter in a dry, clean place, away from direct sunlight and extreme temperatures.
Sorun giderme
Yaygın sorunlar ve çözümleri için bu bölüme bakın.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Uneven or jagged cuts |
|
|
| Karo düzgün bir şekilde kırılmıyor. |
|
|
| Cutting head sticks or moves roughly |
|
|
Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | 55369 |
| Maksimum Kesme Uzunluğu | 800 mm (80 cm) |
| Maximum Tile Dimensions | 800 x 800 mm (for diagonal cuts) |
| Maximum Tile Thickness | 12 mm |
| Kesme Diski Çapı | 22 mm |
| Kesme Çarkı Malzemesi | Tungsten Karbür |
| Taban Plaka Malzemesi | Alüminyum |
| Ürün Boyutları (U x G x Y) | 105.4x86x39 cm |
| Ürün Ağırlığı | 7.4 Kilogram |
| Sap Malzemesi | Polipropilen |
| Önerilen Yüzey | Ceramic, Porcelain |
| Güç Kaynağı | El gücüyle çalışan |
Garanti ve Destek
Garanti bilgileri veya teknik destek için lütfen üreticinin resmi web sitesine başvurun. webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Satın alma belgenizi saklayın.
Manufacturer: GÜDE GmbH & Co.KG
Contact information can typically be found on the product packaging or the official GÜDE webalan.