Rolair JC20 Taşınabilir Hava Kompresörü Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Rolair JC20 Hand Carry Portable Air Compressor. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

The Rolair JC20 is an oilless, 2 horsepower electric air compressor designed for light-duty framing and roofing work. It features a two-cylinder pump, a low-amp draw motor, a heavy-duty roll-cage, integrated cord wrap, upward-facing gauges, and a quarter-turn drain valve, all contributing to its quiet operation at only 70 dB.

2. Güvenlik Bilgileri

Elektrik çarpması, yangın veya ciddi yaralanma riskini azaltmak için her zaman aşağıdaki güvenlik önlemlerine uyun.

• Tüm talimatları okuyunuz: Familiarize yourself with the compressor's controls and proper operation.
• Elektriksel Güvenlik: Güç kaynağının kompresörün hacmiyle uyumlu olduğundan emin olun.tage (115 Volts AC). Do not operate in wet conditions. Always use a grounded outlet.
• Kişisel Koruyucu Donanım: Wear safety glasses or goggles when operating the compressor or using air tools. Hearing protection is recommended, especially during prolonged use.
• Çalışma Ortamı: Operate the compressor in a well-ventilated area. Keep children and bystanders away. Do not operate near flammable liquids or gases.
• Basınç Güvenliği: Never exceed the maximum operating pressure of any air tool or accessory. Do not attempt to modify the pressure relief valve.
• Bakım: Herhangi bir bakım veya onarım yapmadan önce gücü kesin.
• Sıcak Yüzeyler: The compressor pump and motor can become hot during operation. Avoid contact with hot surfaces.

3. Temel Özellikler ve Bileşenler

The Rolair JC20 is engineered with several features for performance and durability:

• Süper Sessiz Çalışma: Teklertage oilless design with only 70 dB noise level.
• Dayanıklı Pompa: Cast aluminum cylinder with stainless steel reed valves.
• Verimli Motor: 1700 RPM low-amp draw motor with automatic overload protection.
• Protective Roll-Cage: Heavy-duty design to protect the pump and motor.
• Entegre Kablo Sarma: Kolay saklama ve taşıma için.
• Upward-Facing Gauges: For easy monitoring of tank and regulated pressure.
• Quarter-Turn Drain Valve: For easy moisture drainage from the tank.

Şekil 3.1: Ön view of the Rolair JC20 Air Compressor, showing the green tank, motor, gauges, and protective roll-cage.

Şekil 3.2: Açısal view highlighting the two-cylinder pump heads and motor assembly.

Şekil 3.3: Yan view of the Rolair JC20, illustrating the compact design and component layout within the roll-cage.

4. Kurulum

1. Paketin açılması: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage to your dealer immediately.
2. Atama: Place the compressor on a firm, level surface in a clean, dry, and well-ventilated area. Ensure adequate clearance around the unit for air circulation.
3. Elektrik Bağlantısı:
   • Güç kaynağı hacminin doğru olduğundan emin oluntage matches the compressor's requirements (115 Volts AC).
   • Plug the power cord into a grounded electrical outlet. Avoid using extension cords if possible. If an extension cord is necessary, use a heavy-duty, grounded cord of appropriate gauge for the distance.
4. İlk Tahliye: Before first use, ensure the quarter-turn drain valve at the bottom of the tank is closed.

5. Kullanım Talimatları

1. Güç Açık: Locate the ON/OFF switch (typically a rocker switch or pressure switch) and turn the compressor ON. The compressor will begin to build pressure.
2. Pressure Build-Up: Allow the compressor to run until it reaches its maximum pressure and the motor automatically shuts off. This indicates the tank is fully charged.
3. Havalı Aletlerin Bağlantısı:
   • Attach your air hose to the quick-connect coupler on the compressor.
   • Connect your air tool to the other end of the hose.
4. Çıkış Basıncının Ayarlanması: Use the pressure regulator knob to set the desired output pressure for your air tool. Monitor the regulated pressure gauge.
5. İşlem: Begin using your air tool. The compressor will cycle on and off automatically to maintain tank pressure as air is consumed.
6. Kapat: When finished, turn the compressor OFF using the ON/OFF switch.
7. Basıncı azaltmak: Disconnect the air hose and tool. Allow any remaining air in the tank to escape through the drain valve or by briefly opening the regulator.

6. Bakım

Regular maintenance ensures the longevity and optimal performance of your Rolair JC20 compressor. Always disconnect the power before performing maintenance.

• Daily: Drain Moisture from Tank:
  • With the compressor off and tank depressurized, open the quarter-turn drain valve located at the bottom of the tank.
  • Allow all accumulated moisture to drain completely.
  • Close the drain valve securely.
• Weekly/Monthly: Inspect Air Filter:
  • Check the air intake filter for dirt and debris.
  • Clean or replace the filter as necessary. A clogged filter can reduce compressor performance and lifespan.
• Periodically: Inspect for Leaks:
  • With the compressor pressurized, apply a soapy water solution to all fittings and connections.
  • Bubbles indicate a leak. Tighten connections or replace seals as needed.
• Depolamak: Store the compressor in a clean, dry location. Ensure the tank is drained of moisture before storage.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

For warranty information, please refer to the documentation included with your purchase or visit the official Rolair website. For technical support, parts, or service inquiries, please contact Rolair customer service or your authorized dealer.

Üretici: ROLAIR

İletişim Bilgileri: Please refer to the contact details provided on the Rolair official website or your purchase receipt for the most current support options.