Parçasam 193495

Partsam 3-Inch Round Marine LED Light (Model 193495) Instruction Manual

1. Giriş

This manual provides essential instructions for the proper installation, operation, and maintenance of your Partsam 3-Inch Round Marine LED Light. This versatile light is designed for marine applications, serving as a navigation, transom, cabin, cockpit, stern, or anchor light. Its robust construction and IP68 waterproof rating ensure reliable performance in various marine environments.

Temel Özellikler:

  • Longevity and Low Draw: Utilizes efficient LED technology.
  • Çok Yönlü Uygulama: Suitable for vertical transoms, interior cabins, or as a courtesy light.
  • Boyutlar: 3-inch diameter.
  • Cilttage: Operates on 12 Volts DC.
  • LED Türü: Features 12-5050-SMD LEDs for bright illumination.
  • Dayanıklı Yapı: Polished 304 Marine Stainless Steel Bezel and PC Lens.
  • Su Geçirmezlik Derecesi: IP68 submersible, designed to withstand marine conditions.

2. Güvenlik Bilgileri

Please read and understand all safety instructions before installing or operating this product. Failure to follow these instructions may result in electrical shock, fire, or damage to the product or vessel.

  • Always disconnect power to the installation area before beginning any electrical work.
  • Ensure proper wiring connections (positive to positive, negative to negative) to prevent damage to the LED light.
  • Use appropriate marine-grade wiring and connectors for all electrical connections.
  • Güç kaynağı hacminin doğru olduğundan emin oluntage, ürünün belirtilen hacmiyle eşleşir.tage (12 Volt DC).
  • Do not modify the light in any way, as this may compromise its waterproof integrity and void the warranty.
  • While the light is IP68 submersible, ensure all connections are properly sealed and protected from water ingress during installation.

3. Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

  • 1 x Partsam 3-Inch Round Marine LED Light
  • Montaj Vidaları
  • Montaj Contası

4. Kurulum

4.1. Montaj

  1. Choose a suitable mounting location on your vessel. The light is designed for surface mounting with its quality flange construction.
  2. Place the mounting gasket on the back of the light to ensure a watertight seal.
  3. Mark the positions for the mounting screws using the light's bezel as a template.
  4. Drill pilot holes for the mounting screws. Ensure the pilot holes are appropriately sized for the provided screws to prevent cracking the plastic or stripping the screws.
  5. Secure the light to the mounting surface using the provided fasteners. Do not overtighten.
Diagram showing the dimensions of the Partsam 3-inch round marine LED light.

Figure 1: Product Dimensions. The light has a 3.0-inch diameter and a depth of 1.0 inch (0.65 inch from the mounting surface).

4.2. Kablolama

The light operates on 12 Volts DC. It includes a lead wire (positive) and a ground wire (negative) for complete installation.

  1. Identify the positive (+) and negative (-) wires from your vessel's 12V DC power supply.
  2. Connect the red lead wire from the LED light to the positive (+) wire of your vessel's power supply.
  3. Connect the black ground wire from the LED light to the negative (-) wire of your vessel's power supply.
  4. Ensure all electrical connections are secure and properly insulated using marine-grade connectors and heat shrink tubing to maintain the IP68 waterproof integrity.
Image showing the red and black wires of the LED light connected to a 12V power source with alligator clips.

Figure 2: Easy Installation. The light comes with pre-attached lead and ground wires for straightforward connection to a 12V DC power source.

Kapatmak view of the 12-5050-SMD LED array inside the marine light.

Figure 3: 12-5050-SMD LED Array. This image highlights the super bright submersible LED array, suitable for various marine lighting needs.

Demonte edilmiş view of the marine light showing the stainless steel bezel, clear plastic lens, and body components.

Figure 4: Stainless Steel Construction. The light features a polished 304 marine stainless steel bezel and a durable clear plastic lens and body.

5. Operasyon

Once properly installed and wired, the Partsam 3-Inch Round Marine LED Light operates by simply applying 12 Volts DC power. It can be connected to an existing switch on your vessel or a new switch can be installed to control its power.

  • İşlevsellik: The light provides bright, white illumination suitable for various purposes including transom lighting, interior cabin lighting, cockpit courtesy lighting, or as a stern/anchor light.
  • Çok yönlülük: Its compact design allows it to be used in any application where a reliable 12V LED light is needed.
Comparison image showing the marine light turned off and then brightly illuminated.

Figure 5: Bright Illumination. This image demonstrates the powerful light output when the unit is active.

Image showing the marine light installed on a boat transom, with smaller inset images of other marine vessels.

Figure 6: Widely Used. The light is universal for 12V marine vehicles, including pontoon boats, fishing boats, kayaks, and sailboats.

6. Bakım

The Partsam 3-Inch Round Marine LED Light is designed for durability and minimal maintenance. Regular inspection and cleaning will help ensure its longevity and optimal performance.

  • Temizlik: Periodically clean the lens with a soft cloth and mild soap and water to remove salt residue, dirt, or marine growth. Avoid abrasive cleaners or harsh chemicals that could damage the lens or bezel.
  • Denetleme: Regularly inspect the wiring and connections for any signs of corrosion, fraying, or damage. Ensure the mounting screws remain tight.
  • Su Geçirmez Bütünlük: The IP68 rating ensures protection against water ingress. However, if the light has been subjected to impact or extreme conditions, inspect the seals and housing for any cracks or damage.
Image showing the marine light submerged in water, demonstrating its IP68 waterproof rating.

Figure 7: IP68 Waterproof. The light is fully submersible, protecting against water, dirt, snow, or dust.

7. Sorun Giderme

If your Partsam Marine LED Light is not functioning as expected, refer to the following common issues and solutions:

SorunOlası NedenÇözüm
Işık açılmıyor.Güç kaynağı yok.Check the vessel's power source and ensure it is active.
Işık açılmıyor.Yanlış kablolama.Verify that the positive and negative wires are connected correctly.
Işık açılmıyor.Gevşek veya aşınmış bağlantılar.Inspect all wiring connections for tightness and corrosion. Clean or re-secure as necessary.
Işık titriyor veya sönük.Yetersiz hacimtage or poor connection.Ses seviyesini kontrol edintage at the light's connection point. Ensure all connections are solid.
Işığın içindeki su.Compromised seal or damage.Discontinue use immediately. Inspect for cracks or damage to the housing/lens. Contact support if damaged.

8. Özellikler

ÖzellikDetay
MarkaParçalarsam
Model Numarası193495
RenkWhite (Light), Clear (Lens)
Ürünün Belirli KullanımlarıInterior, Transom, Cabin, Cockpit, Stern, Anchor, Deck Lighting
Araç Servis TipiBoat Marine 12V Vehicles
Işık Kaynağı TürüLED (12-5050-SMD)
Cilttage12 Volt Doğru Akım
Lens MalzemesiDurable Clear Plastic Lens with Polished 304 Marine Stainless Steel Bezel
Su Geçirmezlik DerecesiIP68 Dalgıç
Ürün Ağırlığı4.2 ons
Paket Boyutları6.42 x 5.12 x 1.06 inç
Güvenlik DerecelendirmesiDOT Sertifikalı, CAPA

9. Garanti ve Destek

Partsam products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the product packaging or contact Partsam customer service directly. Keep your purchase receipt for warranty claims.

© 2024 Partsam. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.