be quiet! Dark Base PRO 900 Rev. 2 Full Tower ATX PC Case User Manual

giriiş

This manual provides detailed instructions for the installation, operation, and maintenance of your be quiet! Dark Base PRO 900 Rev. 2 Full Tower ATX PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your product.

The Dark Base PRO 900 Rev. 2 is designed for high-end systems and offers exceptional flexibility, silent operation, and advanced cooling capabilities. Its modular design allows for various configurations to suit your specific needs.

Güvenlik Bilgileri

• Herhangi bir bileşeni takmadan veya çıkarmadan önce daima güç kaynağını duvar prizinden çıkarın.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Küçük parçaları ve ambalaj malzemelerini çocuklardan uzak tutun.
• Do not attempt to open or repair the case or its components yourself. Refer to qualified service personnel.
• Aşırı ısınmayı önlemek için bilgisayar kasasının etrafında yeterli havalandırma olduğundan emin olun.

Paket İçeriği

Aşağıda listelenen tüm bileşenlerin paketinizde mevcut olduğunu doğrulayın:

• be quiet! Dark Base PRO 900 Rev. 2 PC Case
• Accessory box with screws, cable ties, and other mounting hardware
• Kullanıcı Kılavuzu
• RGB LED strips (pre-installed or included separately)
• Additional fan mounting brackets (if applicable)

Kurmak

1. Davayı Hazırlama

Place the case on a stable, flat surface. Remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels backward. The tempered glass side panel should be handled with extreme care.

Resim: İç mekan view of the Dark Base PRO 900 Rev. 2, illustrating the internal layout for component installation.

2. Anakart Kurulumu

The motherboard tray is removable and can be inverted for an inverse layout. To remove, unscrew the mounting screws and slide the tray out. Install your ATX, E-ATX, or XL-ATX motherboard onto the tray using the provided standoffs and screws. Ensure the I/O shield is installed in the case before re-inserting the motherboard tray.

3. Güç Kaynağı Ünitesi (PSU) Kurulumu

Install the PSU from the rear of the case. Secure it with the provided screws. Ensure all necessary cables are routed through the designated cutouts for efficient cable management.

4. Drive Installation (HDD/SSD)

The case features modular HDD slots. Each HDD cage can be repositioned or removed. Install 3.5-inch HDDs into the drive cages using the anti-vibration grommets and screws. 2.5-inch SSDs can be mounted directly onto the HDD trays or dedicated SSD mounts behind the motherboard tray.

5. Grafik Kartı ve Genişletme Kartları

Remove the necessary PCIe slot covers. Insert your graphics card and other expansion cards into the motherboard's PCIe slots and secure them with screws.

6. Fan ve Radyatör Montajı

The case comes with three pre-installed Silent Wings 3 PWM fans. Additional fans or radiators up to 420mm can be installed in various positions (front, top, rear, bottom). Refer to the fan controller section for connecting fans.

Image: Front of the Dark Base PRO 900 Rev. 2 with the door open, showing fan mounts and dust filter access.

7. Kablo Yönetimi

Utilize the numerous cable routing cutouts and Velcro straps behind the motherboard tray to manage cables. This improves airflow and aesthetics.

Kullanım Talimatları

1. Açma

After all components are installed and connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button located on the top I/O panel to start your system.

Image: Top I/O panel of the Dark Base PRO 900 Rev. 2, highlighting the power button and connectivity options.

2. Fan Kontrolü

The case features a stepless dual-rail fan controller, switchable between Silence and Performance modes. Use the fan controller switch on the top I/O panel to adjust fan speeds according to your preference for noise or cooling performance.

3. RGB LED Illumination

The integrated RGB LED illumination can be controlled via a dedicated button on the top I/O panel or synchronized with compatible motherboard software. Cycle through various colors and lighting effects to customize your system's appearance.

Bakım

1. Toz Filtresi Temizliği

The Dark Base PRO 900 Rev. 2 includes easily removable dust filters at the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case. Simply slide them out, clean with water or a soft brush, and re-insert once dry.

2. Genel Temizlik

Yumuşak bir d kullanınamp cloth to clean the exterior surfaces of the case. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

Sorun giderme

• Sistem Açılmıyor:
  • Güç kaynağının duvar prizine doğru şekilde bağlı olduğundan ve açık olduğundan emin olun.
  • Anakart ve bileşenlere giden tüm güç bağlantılarını kontrol edin.
  • Ön panel güç düğmesi kablosunun anakarta doğru şekilde bağlı olduğundan emin olun.
• Fanlar Dönmüyor:
  • Check fan connections to the fan controller or motherboard headers.
  • Ensure the fan controller is set to an appropriate speed mode (not off, if applicable).
• RGB LEDs Not Working:
  • Verify RGB strip connections to the case's RGB controller or motherboard.
  • Anakart yazılımı kullanıyorsanız, doğru şekilde yüklendiğinden ve yapılandırıldığından emin olun.
• Aşırı Gürültü:
  • Check if fan speeds are set too high; adjust using the fan controller.
  • Ensure all screws are tightened to prevent vibrations.
  • Clean dust filters and fans to remove obstructions.

Özellikler

Garanti ve Destek

Garanti Bilgileri

Bu ürün bir 3 yıllık üretici garantisi from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair.

Garanti talepleri için lütfen satın alma belgenizi saklayın.

Müşteri Desteği

For technical assistance, troubleshooting, or warranty inquiries, please visit the official be quiet! websiteye gidin veya doğrudan müşteri destekleriyle iletişime geçin.

Resmi Webalan: www.bequiet.com