JET JMD-18 Frezeleme/Delme Makinesi Kullanım Kılavuzu

giriiş

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your JET JMD-18 230-Volt 1 Phase Milling/Drilling Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

The JET JMD-18 is a versatile milling and drilling machine designed for precision work. It features a hinged belt cover for faster speed changing and a 9-1/2-by-31-3/4-inch worktable. This model includes a 24-piece milling tool kit, which contains a 5-piece wiggler set, enhancing its utility for various machining tasks.

Güvenlik Talimatları

Yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için her zaman temel güvenlik önlemlerine uyun. Çalışma alanınızı temiz ve iyi aydınlatılmış tutun. Yanıcı sıvılar, gazlar veya toz gibi patlayıcı ortamlarda elektrikli aletleri çalıştırmayın.

• Uygun kişisel koruyucu ekipman (KKD) kullanın; bunlar arasında güvenlik gözlükleri, işitme koruyucuları ve sağlam ayakkabılar bulunur.
• Ensure the machine is properly grounded and connected to a suitable power supply (230-Volt, 1 Phase).
• Ellerinizi ve parmaklarınızı hareketli parçalardan uzak tutun.
• güvenli bir şekilde clamp all workpieces before beginning any operation.
• Herhangi bir bakım veya ayarlama yapmadan önce gücü kesin.

Kurulum ve Montaj

Unpack all components carefully and inspect for any shipping damage. Ensure all parts listed in the packing list are present. Position the machine on a stable, level surface capable of supporting its weight. Secure the machine to the floor if necessary to prevent movement during operation.

makine bittiview

Figure 1: JET JMD-18 Milling/Drilling Machine with its stand. This image shows the complete assembly of the machine, including the head, column, table, and base.

Elektriksel bağlantı

Connect the machine to a dedicated 230-Volt, 1 Phase power supply. Ensure the circuit is protected by an appropriate circuit breaker. Consult a qualified electrician if you are unsure about the electrical requirements.

Kullanım Talimatları

Hız Değiştirme

The JET JMD-18 features a hinged belt cover for convenient speed adjustments. To change speeds:

1. Ensure the machine is turned off and disconnected from power.
2. Open the hinged belt cover.
3. Adjust the belt position on the pulleys to achieve the desired spindle speed. Refer to the speed chart inside the belt cover for recommended settings.
4. Close the belt cover securely before resuming operation.

İş parçası Clampinmek

Her zaman güvenli bir şekilde kapatamp your workpiece to the 9-1/2-by-31-3/4-inch worktable using appropriate clamps or a vise. Loose workpieces can cause injury or damage to the machine and workpiece.

Milling and Drilling Operations

Familiarize yourself with the controls for spindle feed, table movement (X, Y, Z axes), and depth stop. Always start with light cuts and gradually increase depth as you become familiar with the machine's capabilities and the material being worked on.

Bakım

Regular maintenance is crucial for the longevity and optimal performance of your JET JMD-18 machine. Always disconnect power before performing any maintenance.

• Temizlik: Keep the machine clean from chips, dust, and debris. Use a brush or shop vacuum. Avoid using compressed air directly on bearings.
• Yağlama: Regularly lubricate all moving parts, including lead screws, gibs, and spindle bearings, according to the lubrication points indicated in the machine diagram (refer to full manual for diagram).
• Bant Denetimi: Periodically inspect the drive belts for wear, cracks, or tension. Replace worn belts and adjust tension as needed.
• Table Care: Keep the worktable clean and free of nicks or burrs. Apply a thin coat of rust preventative if the machine will be idle for extended periods.

Sorun giderme

This section provides solutions to common issues you might encounter with your JET JMD-18 machine. For problems not listed here, contact JET customer support.

Özellikler

Garanti Bilgileri

JET products are backed by a comprehensive warranty. For specific warranty terms and conditions applicable to your JMD-18 machine, please refer to the warranty card included with your product or visit the official JET webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.

The buybox winner information indicates a return policy of 30 days for refund/replacement, fulfilled by Amazon. This is a general return policy and not necessarily the manufacturer's warranty.

Müşteri Desteği

For technical assistance, parts orders, or service inquiries regarding your JET JMD-18 Milling/Drilling Machine, please contact JET customer support. You can find contact information on the official JET websitede veya makinenizle birlikte verilen belgelerde bulabilirsiniz.

Visit the official Jet Store on Amazon for more information: JET Store