JET JMD-18 350018 Milling/Drilling Machine

giriiş

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

Şekil 1: The JET JMD-18 350018 Milling/Drilling Machine, shown with its integrated floor stand. This versatile machine is designed for precision milling and drilling operations.

Güvenlik Bilgileri

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating this machine.

• Makineyi çalıştırmadan önce tüm talimatları okuyun ve anlayın.
• Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and suitable clothing. Avoid loose clothing or jewelry.
• Çalışma alanının temiz, iyi aydınlatılmış ve dağınıklıktan arınmış olduğundan emin olun.
• Makineyi d'de çalıştırmayın.amp veya ıslak yerler.
• Çocukları ve çevredekileri çalışma alanından uzak tutun.
• Securely fasten all workpieces before beginning any operation.
• Herhangi bir bakım, ayarlama veya aksesuar değişimi yapmadan önce elektrik bağlantısını kesin.
• Sadece önerilen aksesuarları ve aparatları kullanın.
• Maintain the machine in good working condition. Inspect for damaged parts before each use.
• Makineyi çalışırken asla gözetimsiz bırakmayın.

Kurmak

Proper setup is crucial for the safe and effective operation of your milling/drilling machine.

1. Ambalajın Açılması ve Muayene: Carefully unpack all components. Inspect for any shipping damage. Report any damage immediately to your dealer.
2. Stand Montajı: Assemble the CS-18 Floor Stand according to the separate stand assembly instructions provided. Ensure all fasteners are securely tightened. The stand includes an enclosed shelf for convenient storage.
3. Machine Mounting: Securely mount the JMD-18 milling/drilling machine head to the assembled floor stand. Ensure all mounting bolts are tightened to the specified torque.
4. Elektrik Bağlantısı: Connect the machine to a 230-Volt, 1-Phase power supply. Ensure the electrical circuit is properly grounded and protected by a suitable circuit breaker.
5. Worktable Preparation: Clean the 9-1/2-by-31-3/4-inch worktable surface. Apply a light coat of machine oil to prevent rust.
6. Belt Cover Adjustment: The hinged belt cover allows for faster speed changing. Familiarize yourself with its operation for future speed adjustments.
7. Seviyelendirme: Ensure the machine is level on a stable surface to prevent vibration and ensure accurate operation.

Kullanım Talimatları

This section outlines the general procedures for operating your JET JMD-18 milling/drilling machine.

• Güç Açma/Kapatma: Locate the main power switch. Turn the machine ON only when ready to begin work and OFF immediately after completing a task or before making adjustments.
• Hız Seçimi: Adjust the spindle speed using the belt and pulley system accessible via the hinged belt cover. Select the appropriate speed for the material and tooling being used. Refer to a speed chart for guidance.
• İş parçası ClampTürkçe: Her zaman güvenli bir şekilde kapatamp your workpiece to the worktable using appropriate vises or clamps. Loose workpieces can cause injury or damage.
• Alet Kurulumu: Install the correct cutting tool (drill bit, end mill, etc.) into the spindle chuck or collet. Ensure it is properly seated and tightened.
• Milling Operations: For milling, carefully position the workpiece relative to the cutting tool. Use the table's X, Y, and Z axis controls for precise material removal.
• Sondaj İşlemleri: For drilling, align the drill bit with the desired hole location. Use the quill feed handle for controlled drilling depth.
• Soğutma Sıvısı Uygulaması: For certain materials and operations, apply appropriate cutting fluid to prolong tool life and improve surface finish.
• Acil durdurma: Acil durdurma butonunun yerini ve çalışma şeklini öğrenin.

Bakım

Regular maintenance ensures the longevity and optimal performance of your JET milling/drilling machine.

• Günlük Temizlik: After each use, clean the machine thoroughly, removing all chips, dust, and debris from the worktable, ways, and other surfaces.
• Yağlama: Periodically lubricate all moving parts, including lead screws, gibs, and spindle bearings, according to the lubrication points indicated in the machine's diagrams (if available). Use recommended lubricants.
• Bant Denetimi: Regularly inspect the drive belts for wear, cracks, or tension. Replace worn belts and adjust tension as needed.
• Elektrik Muayenesi: Periodically check electrical cords and connections for damage. Ensure all wiring is secure.
• Tooling Care: Keep all cutting tools sharp and clean. Dull tools can lead to poor performance and machine strain.
• Depolamak: When not in use, store the machine in a dry, clean environment. Apply a thin coat of rust preventative to exposed metal surfaces.

Sorun giderme

Bu bölümde karşılaşabileceğiniz yaygın sorunlara çözümler sunulmaktadır.

Özellikler

Garanti ve Destek

For information regarding product warranty, technical support, or to purchase replacement parts, please contact JET customer service or visit the official JET webalan.

You can also find more information and products from JET by visiting their official store page: JET Official Store