VWR 62379-531 Digital Caliper Instruction Manual

1. Giriş

This manual provides detailed instructions for the safe and effective use of your VWR 62379-531 Digital Caliper. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

Güvenlik Önlemleri

• Always handle the caliper with care to avoid dropping or impacting the measuring surfaces.
• Keep the caliper clean and free from dust, dirt, and moisture.
• Do not attempt to disassemble or modify the caliper, as this may void the warranty and cause damage.
• Store the caliper in its protective case when not in use.

2. Ürün Bittiview

The VWR 62379-531 Digital Caliper is a precision measuring instrument designed for accurate measurements of length, depth, and step. Constructed from durable stainless steel, it features an ergonomic design for comfortable handling and reliable performance.

Temel Özellikler:

• Ergonomik tasarım: Provides comfortable grip and ease of use.
• Paslanmaz çelik konstrüksiyon: Dayanıklılık ve korozyona karşı direnç sağlar.
• Dijital gösterge: Offers clear and precise readings.

Bileşenler:

Şekil 2.1: VWR 62379-531 Digital Caliper. This image shows the overall design of the digital caliper, highlighting its stainless steel body and digital display. The main jaws for external measurement are visible, along with the smaller jaws for internal measurement and the depth rod.

• Dış Ölçüm Çeneleri: Dış ölçüleri ölçmek için kullanılır.
• İç Ölçüm Çeneleri: İç ölçüleri ölçmek için kullanılır.
• Derinlik Çubuğu: Derinlik ölçümü için kullanılır.
• Adım Adım Ölçüm Yüzeyleri: Basamak boyutlarını ölçmek için kullanılır.
• Ana Ölçek: The fixed scale on the caliper body.
• Kaydırıcı: Kaliperin hareketli kısmı.
• Dijital gösterge: Ölçüm değerini gösterir.
• SIFIR Düğmesi: Sets the display to zero at any point.
• AÇIK/KAPALI Düğmesi: Powers the caliper on or off.
• mm/inch Button: Switches between metric and imperial units.
• Başparmak Silindiri: For fine adjustment of the slider.
• Kilitleme Vidası: Sürgüyü konumunda sabitler.

3. Kurulum

3.1 Paketin açılması

1. Carefully remove the digital caliper from its packaging.
2. Inspect the caliper for any signs of damage during transit. If damage is found, contact your supplier immediately.
3. Ambalajda listelenen tüm bileşenlerin mevcut olduğundan emin olun.

3.2 Pil Kurulumu

The VWR 62379-531 Digital Caliper typically uses a single button cell battery (e.g., CR2032 or LR44, check battery compartment for specific type).

1. Dijital ekran ünitesindeki pil bölmesi kapağını bulun.
2. Slide the cover open or unscrew it, depending on the design.
3. Yeni pili artı (+) tarafı yukarı bakacak şekilde yerleştirin.
4. Pil bölmesi kapağını sıkıca kapatın.

3.3 Initial Zero Setting

1. Basın AÇIK/KAPALI button to power on the caliper.
2. Gently close the external measuring jaws completely.
3. Basın SIFIR button. The display should now read "0.00" (or "0.000" depending on resolution). Your caliper is now ready for use.

4. Kullanım Talimatları

4.1 Güç Açma/Kapama ve Ünite Seçimi

• Basın AÇIK/KAPALI Kaliperi açmak için düğme.
• Basın AÇIK/KAPALI button again to turn the caliper off. The caliper may also have an auto-off feature after a period of inactivity.
• Basın mm/inç button to switch between millimeters and inches.

4.2 Measuring Techniques

Always ensure the measuring surfaces are clean before taking a measurement.

1. Dış Ölçüm:
   • Open the external jaws wider than the object.
   • Place the object between the jaws and gently close them until they make firm contact.
   • Read the measurement on the digital display.
2. İç Ölçüm:
   • Close the internal jaws and insert them into the opening to be measured.
   • Open the jaws until they make firm contact with the inner surfaces.
   • Read the measurement on the digital display.
3. Derinlik Ölçümü:
   • Place the end of the main beam firmly on the top surface of the object.
   • Extend the depth rod into the hole or recess until it touches the bottom.
   • Read the measurement on the digital display.
4. Adım Ölçümü:
   • Place the step measuring face of the main beam on the higher surface.
   • Extend the slider until its step measuring face rests on the lower surface.
   • Read the measurement on the digital display.

4.3 Zero Setting at Any Point

The ZERO button allows you to set a temporary zero point at any position. This is useful for differential measurements or setting a reference point.

1. Position the jaws at the desired reference point.
2. Basın SIFIR button. The display will show "0.00".
3. Subsequent measurements will be relative to this new zero point.

4.4 Locking Screw

Use the locking screw to fix the slider in position after taking a measurement, allowing for easier reading or transfer of the measurement.

5. Bakım

5.1 Temizlik

• Wipe the caliper surfaces with a clean, dry, lint-free cloth after each use.
• For stubborn dirt, a cloth lightly dampened with isopropyl alcohol can be used, but avoid excessive moisture.
• Never use abrasive cleaners or solvents that could damage the finish or electronic components.
• Ensure the measuring surfaces are free of debris to maintain accuracy.

5.2 Depolama

• Store the caliper in its original protective case when not in use.
• Keep the caliper in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
• Slightly open the jaws before storage to relieve pressure on the measuring surfaces.

5.3 Pil Değişimi

When the display becomes dim or shows an error message related to power, it's time to replace the battery. Follow the instructions in Section 3.2 for battery installation.

5.4 Kalibrasyon

While the caliper is factory-calibrated, periodic checks against known standards (gauge blocks) are recommended for critical applications to ensure continued accuracy. If significant deviation is observed, professional calibration may be required.

6. Sorun Giderme

7. Özellikler

8. Garanti ve Destek

8.1 Garanti Bilgileri

VWR products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your VWR 62379-531 Digital Caliper, please refer to the warranty card included with your purchase or visit the official VWR webSite. Satın alma belgenizi garanti talepleriniz için saklayın.

8.2 Müşteri Desteği

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact VWR customer support. You can typically find contact information on the VWR websitenizde veya ürün ambalajınızda yer almalıdır.

For online resources and frequently asked questions, please visit: www.vwr.com