Extreme Networks AP-7622 802.11ac Dual Band Access Point User Manual

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your Extreme Networks AP-7622 802.11ac Dual Band Access Point. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

2. Güvenlik Bilgileri

• Ensure the device is installed in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Use only the power adapter specified by Extreme Networks for this device.
• Cihazı açmayınasing. Tüm servis işlemlerini yetkili personele yaptırın.
• Cihazı çocuklardan uzak tutunuz.

3. Paket İçeriği

Paketinizin aşağıdaki öğeleri içerdiğini doğrulayın:

• Extreme Networks AP-7622 Access Point
• Montaj Braketi (varsa)
• Hızlı Başlangıç ​​Kılavuzu (varsa)
• Power Adapter (if not powered by PoE)

Note: Specific contents may vary based on region and package configuration.

4. Ürün Bittiview

The Extreme Networks AP-7622 is an 802.11ac dual-band wireless access point designed for robust and high-performance wireless connectivity. It features internal antennas, Bluetooth Low Energy (BLE), and a Gigabit Ethernet port.

4.1 Ön View

Şekil 1: Ön view of the AP-7622, showing the sleek white casing and three indicator LEDs.

4.2 Açılı View

Şekil 2: Açısal view of the AP-7622, highlighting its compact design and side profile.

4.3 Arka View ve Limanlar

Şekil 3: Arka view of the AP-7622, displaying mounting points, product label with model and serial numbers, and the Gigabit Ethernet port.

The rear panel includes mounting points for secure installation and a label providing essential device information such as the model number (AP-7622), serial number (e.g., 18233523300296), MAC address (e.g., B85001D83891), and input power requirements (48VDC, 0.25A or PoE).

5. Kurulum ve Kurulum

5.1 Alan Planlaması

Kurulumdan önce aşağıdakileri göz önünde bulundurun:

• Kapsama Alanı: Determine the optimal placement for maximum Wi-Fi coverage.
• Parazit yapmak: Avoid placing near large metal objects, microwave ovens, or other devices that emit strong electromagnetic interference.
• Güç Kaynağı: Ensure access to a power outlet or a Power over Ethernet (PoE) enabled switch/injector.

5.2 Fiziksel Kurulum

1. Montaj:

   The AP-7622 can be mounted on a wall or ceiling using the integrated mounting points on the rear panel. Secure the mounting bracket (if included) to the desired surface, then attach the access point to the bracket.

2. Connecting Ethernet:

   Connect an Ethernet cable from your network switch or router to the Gigabit Ethernet port on the AP-7622. If using PoE, this cable will also provide power.

3. Connecting Power (if not using PoE):

   If not using PoE, connect the appropriate power adapter (not included with all models) to the power input port on the AP-7622 and then to a power outlet.

5.3 İlk Yapılandırma

After physical installation and power-up, the AP-7622 will boot. Initial configuration is typically performed via a web-based interface or Extreme Networks' network management software.

• Erişim Web Arayüz: Refer to the Quick Start Guide or Extreme Networks documentation for the default IP address or discovery method.
• Ağ Ayarları: Configure Wi-Fi SSIDs, security protocols (WPA2/WPA3 recommended), and network settings.
• Yazılım güncellemesi: It is recommended to update the device firmware to the latest version after initial setup for optimal performance and security.

6. Erişim Noktasının Çalıştırılması

6.1 LED Göstergeleri

The AP-7622 features indicator LEDs on its front panel to provide status information:

• Güç LED'i: Indicates power status. (e.g., Solid Green for normal operation)
• WLAN LED'leri: Indicate activity on the 2.4 GHz and 5 GHz wireless bands. (e.g., Blinking for data transmission)
• Ethernet LED'i: Ethernet bağlantısının durumunu ve etkinliğini gösterir.

Refer to the full product documentation for a detailed explanation of LED patterns.

6.2 Kablosuz Bağlantı

The AP-7622 supports 802.11ac dual-band operation, allowing devices to connect on either the 2.4 GHz or 5 GHz frequency bands. The 2.4 GHz band offers wider coverage, while the 5 GHz band provides higher speeds and less interference.

• Bağlantı Cihazları: Arama the configured Wi-Fi network (SSID) on your wireless devices and enter the password.
• Konuk Ağları: If configured, guest networks provide isolated internet access for visitors without compromising your main network security.

7. Bakım

7.1 Firmware Güncellemesi

Regularly check the Extreme Networks support website for the latest firmware updates. Firmware updates often include performance improvements, new features, and security patches. Follow the instructions provided by Extreme Networks for the update process.

7.2 Temizlik

To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, as they may damage the device.

7.3 Çevresel Hususlar

Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage and ensure stable operation.

8. Sorun Giderme

9. Özellikler

10. Garanti Bilgileri

Extreme Networks products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your AP-7622, please refer to the warranty card included with your product or visit the official Extreme Networks webSite. Satın alma belgenizi garanti talepleriniz için saklayın.

11. Teknik Destek

For technical assistance, additional documentation, or to download the latest firmware, please visit the Extreme Networks support portal:

www.extremenetworks.com/support/

You may also contact Extreme Networks customer service directly for further assistance.