Einhell Power X-Change 18V Cordless Long Reach Hedge Trimmer GE-HH 18/45 Li T Solo User Manual

1. Ürün Bittiview

The Einhell Power X-Change GE-HH 18/45 Li T is a powerful 18V cordless long reach hedge trimmer designed for maintaining hedges, shrubs, and bushes, especially at height. This tool offers cordless freedom and is part of the Einhell Power X-Change battery system (battery and charger sold separately).

Temel özellikler şunlardır:

• Kablosuz Özgürlük: Operates on an 18V Power X-Change battery for unrestricted movement.
• Teleskopik Sap: Infinitely adjustable aluminum handle extends up to 2.5 meters (8 feet 2 inches) for reaching high areas.
• Hassas Bıçaklar: Laser-cut and diamond-ground steel blades provide clean, sharp cuts with a cutting length of 400mm (16 inches) and 16mm teeth spacing.
• Ayarlanabilir Kesme Başlığı: A 7-position tiltable cutting head allows for versatile trimming angles.
• Dengeli Tasarım: Handle-mounted motor ensures optimal balance, reducing fatigue during extended use.
• Dayanıklı Yapı: Features a robust metal gearbox for long-lasting performance.

2. Güvenlik Talimatları

Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before use. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Kişisel Koruyucu Donanım (KKD): Always wear appropriate PPE, including safety glasses, hearing protection, sturdy gloves, and non-slip footwear. A safety helmet with a face shield is recommended, especially when working overhead.
• Çalışma Alanı: Keep the work area clean and well-lit. Do not operate the trimmer in wet or damp conditions. Keep bystanders, children, and pets at a safe distance (at least 15 meters / 50 feet).
• Alet Muayenesi: Before each use, inspect the trimmer for any damage, loose parts, or worn blades. Do not use a damaged tool.
• Pil Güvenliği: Use only Einhell Power X-Change 18V batteries and chargers. Do not expose batteries to heat, direct sunlight, or water.
• Doğru Tutuş: Tıraş makinesini her zaman iki elinizle sıkıca tutun.
• Engellerden Kaçının: Be aware of hidden wires, fences, or other objects that could be struck by the blades.
• Bakım: Disconnect the battery before performing any maintenance, cleaning, or when clearing jammed material.
• Depolamak: Store the trimmer in a dry, secure place out of reach of children.

3. Dahil Edilen Bileşenler

The following components are typically included with your Einhell GE-HH 18/45 Li T hedge trimmer:

• Çit Düzeltici Kafası
• Uzatılabilir Direk
• Bıçak Koruması
• Kullanım Kılavuzu

Note: Battery and charger are not included and must be purchased separately as part of the Power X-Change system.

4. Kurulum

Follow these steps to prepare your hedge trimmer for use:

1. Direği Birleştirin: Connect the hedge trimmer head to the extendable pole. Ensure all connections are secure and locked into place according to the diagrams in the full manual.
2. Direk Uzunluğunu Ayarlayın: Loosen the locking mechanism on the telescopic aluminum handle. Extend the pole to the desired length for your task, then securely tighten the locking mechanism. The pole can be adjusted from 1.6m to 2.5m.
3. Pili takın: Ensure the battery is fully charged. Align the battery with the battery slot on the trimmer's handle and slide it in until it clicks securely into place.
4. Omuz askısını takın: For comfortable and balanced operation, especially when extended, attach the provided shoulder strap to the designated points on the trimmer. Adjust the strap for a snug fit.
5. Remove Blade Guard: Carefully remove the blade guard from the cutting blades before starting the trimmer. Always replace the blade guard when the tool is not in use or during transport.

5. Kullanım Talimatları

Before operating, ensure you have read the safety instructions and the trimmer is properly set up.

1. Düzelticiyi Başlatma: With the battery inserted, press the safety lock-off button (if present) and then squeeze the trigger switch to start the motor. Release the trigger to stop.
2. Kesme Başlığı Açısının Ayarlanması: The cutting head can be tilted to 7 different positions. To adjust, press the release button/lever on the head, set it to the desired angle, and ensure it locks securely in place. This allows for ergonomic cutting of hedge tops and sides.
3. Kırpma Tekniği:
   • For vertical surfaces, use a sweeping motion from bottom to top.
   • For horizontal surfaces, hold the trimmer slightly angled (about 10-15 degrees) to ensure a clean cut and allow clippings to fall away.
   • Avoid forcing the blades through thick branches. If the blades jam, immediately release the trigger and remove the battery before clearing the obstruction.
4. Working at Height: When using the extended pole, maintain a stable stance. Use the shoulder strap to distribute weight and reduce strain. Be mindful of overhead power lines and other obstacles.
5. Trimmer'ı Durdurma: Release the trigger switch. The blades will stop quickly. Always remove the battery when finished or before making adjustments.

6. Bakım

Düzenli bakım, çit budama makinenizin optimum performansını sağlar ve ömrünü uzatır.

• Bıçak Temizliği: After each use, remove the battery and carefully clean the blades with a stiff brush to remove sap and debris.
• Bıçak Yağlaması: Paslanmayı önlemek ve sorunsuz çalışmayı sağlamak için temizlikten sonra kesici bıçaklara hafif bir makine yağı veya bıçak yağlayıcısı uygulayın.
• Bıçak Bileme: Dull blades can tear foliage and strain the motor. Have the blades professionally sharpened or replace them if they become excessively dull or damaged.
• Genel Temizlik: Wipe down the housing of the trimmer with a damp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
• Depolamak: Store the trimmer in a dry, secure location, away from moisture and extreme temperatures. Always reattach the blade guard before storage. Remove the battery if storing for extended periods.

7. Sorun Giderme

Bu bölümde çit budama makinenizde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.

8. Özellikler

Technical data for the Einhell GE-HH 18/45 Li T hedge trimmer:

• Model Numarası: 3410866
• Güç Kaynağı: 18V Battery Powered (Power X-Change system)
• Bıçak Uzunluğu: 450 mm (17.7 inç)
• Kesim Uzunluğu: 400 mm (16 inç)
• Teeth Spacing: 16 mm
• Ürün Ölçüleri (U x G x Y): 82.28" x 5.12" x 6.69" (209 cm x 13 cm x 17 cm)
• Ürün Ağırlığı: 4.28 Kilogram (9.44 lbs)
• Bıçak Malzemesi: Alaşımlı Çelik
• Sap Malzemesi: Alüminyum
• Üretici: Einhell

9. Garanti ve Destek

Garanti bilgileri, teknik destek veya yedek parça siparişi için lütfen resmi Einhell web sitesine başvurun. webSite üzerinden veya müşteri hizmetleri departmanıyla iletişime geçin. Satın alma belgenizi saklayın.

AB Yedek Parça Temin Süresi: 2 Yıl

Daha fazla yardım için lütfen şu adresi ziyaret edin: Einhell yetkilisi webalan.