Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

giriiş

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

Güvenlik Bilgileri

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

• Always disconnect power at the service panel before working with electrical wiring.
• Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
• Özel olarak bu tür kullanım için onaylanmadığı sürece ıslak yerlere monte etmeyin.
• Tüm kablo bağlantılarının güvenli ve düzgün bir şekilde yalıtıldığından emin olun.
• Test the GFCI outlet monthly to ensure proper operation.

Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
• Montaj Vidaları
• Kullanım Kılavuzu (bu belge)

Note: A screwless wall plate is not included and must be purchased separately.

Kurulum

Follow these steps for proper installation of your GFCI outlet:

1. Gücü Kapatın: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltage test cihazı.
2. Eski Çıkışı Kaldır: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
3. Kabloları Tanımlayın:
   • LINE Wires: These wires bring power from the circuit breaker to the GFCI outlet.
   • LOAD Wires: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
   • Topraklama kablosu: Typically bare copper or green insulated.
4. Connect Wires to GFCI:
   • Bağlan ASTAR wires to the terminals marked "LINE" on the GFCI outlet.
   • Bağlan YÜK wires to the terminals marked "LOAD" on the GFCI outlet.
   • Bağlan topraklama teli to the green ground screw.

   Önemli: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.

5. Prizin montajını yapın: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
6. Duvar Plakasını Takın: Attach the screwless wall plate (not included) over the GFCI outlet.
7. Gücü Geri Yükle: Sigortadan elektriği tekrar açın.

Resim: Ön view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

Operasyon

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

• Yeniden başlatma tuşu: Kurulumdan sonra veya elektrik kesintisi sonrasındatage, press the red RESET button to restore power to the outlet.
• TEST Düğmesi: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

Aylık Test:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

1. Fiş alamp or other device into the GFCI outlet and turn it on.
2. Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
3. Press the red RESET button. The lamp should turn back on.
4. Eğer lamp does not turn off or on as described, the GFCI may be faulty and should be replaced.

Bakım

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

• Keep the outlet clean and free from dust and debris.
• Do not paint over the GFCI outlet or its buttons, as this can impair operation.
• If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

Sorun giderme

Özellikler

• Modeli: 1597TRW
• Marka: Legrand
• Renk: Beyaz
• Ampöfke: 15 Amps
• Cilttage: 125 Volt
• Toplam Güç Çıkışları: 2
• Bağlantı Tipi: Nema 5-15
• Malzeme: Metal
• Özellikler: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
• UPC: 680147085438
• ASIN: B079LTP7Y5

Garanti ve Destek

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official website veya ürün ambalajı.