1. Ürün Bittiview
The Astralpool Aster 99- Sand Filter is a high-performance filtration system designed for swimming pools. Constructed from laminated polyester and fiberglass, this filter ensures durability and efficient water purification. It features a lateral selector valve, a manometer for pressure monitoring, and a drain valve for easy water emptying. This manual provides essential information for the safe and effective installation, operation, and maintenance of your filter.
- Yapı: Laminated polyester and fiberglass for enhanced durability.
- Bileşenler: Equipped with a manometer, drain valve, and lateral selector valve.
- Maksimum Çalışma Basıncı: 2.5 kg/cm².
- Maximum Filtration Capacity: 50 m³/h/m².
2. Kurulum ve Kurulum
Proper installation is crucial for the optimal performance and longevity of your Astralpool Aster 99- Sand Filter. Ensure all connections are secure and watertight.
2.1. Site Seçimi
Choose a level, solid surface for the filter, preferably close to the pool pump and the pool itself. The location should be protected from direct sunlight and adverse weather conditions, and allow sufficient space for maintenance and operation.
2.2. Filtre Grubu
- Filtreyi Konumlandırın: Place the filter tank on its designated base.
- Filtre Ortamı Ekle: Carefully fill the filter tank with the appropriate amount and type of filter sand (or other media) as recommended by Astralpool. Ensure the central pipe is protected during this process to prevent sand from entering it.
- Install Multi-Port Valve: Attach the lateral selector valve to the top of the filter tank. Ensure the O-ring is correctly seated and the clamp güvenli bir şekilde sabitlenir.
- Tesisatı Bağlayın: Connect the pump outlet to the "PUMP" port on the valve, the pool return line to the "RETURN" port, and the waste line to the "WASTE" port. Use appropriate fittings and sealants to prevent leaks.
- Manometre Montajı: Screw the manometer into its designated port on the multi-port valve.
- Tahliye vanası: Ensure the drain valve at the bottom of the filter is closed.
Şekil 1: Technical drawing of the Astralpool Aster 99- Sand Filter, illustrating key dimensions (D, H, M, N, K) and overall structure. This diagram helps in understanding the physical layout and connection points of the filter.
3. Kullanım Talimatları
The multi-port valve controls the filter's operation. Always turn off the pump before changing the valve position to prevent damage.
3.1. Valve Positions
- FİLTRE: Normal filtration mode. Water flows through the filter media and returns to the pool.
- GERİ YIKAMA: Cleans the filter media by reversing water flow. Water is discharged through the waste line.
- DURULMAK: Used after backwashing to settle the filter media and flush out any remaining debris from the waste line.
- ATIK/KANALİZASYON: Bypasses the filter, sending water directly to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
- DEVRİM: Bypasses the filter, circulating water directly back to the pool. Useful for chemical distribution without filtration.
- KAPALI: Shuts off all flow to the filter and pool. Use for pump maintenance or when the filter is not in use.
3.2. Ilk başlangıç
- Ensure the filter is filled with sand and all connections are secure.
- Set the multi-port valve to the "BACKWASH" position.
- Turn on the pump and backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
- Pompayı kapatın.
- Set the valve to the "RINSE" position.
- Pompayı çalıştırın ve 30-60 saniye boyunca durulayın.
- Pompayı kapatın.
- Set the valve to the "FILTER" position.
- Turn on the pump. The filter is now operating in normal filtration mode.
4. Bakım
Regular maintenance ensures efficient filtration and extends the life of your Astralpool Aster 99- Sand Filter.
4.1. Backwashing
Backwash the filter when the pressure gauge reading is 0.2-0.3 kg/cm² (3-5 psi) above the clean filter's starting pressure, or when pool water clarity decreases.
- Pompayı kapatın.
- Çoklu port vanasını "GERİ YIKAMA" konumuna getirin.
- Turn on the pump and backwash until the water in the sight glass runs clear (typically 2-3 minutes).
- Pompayı kapatın.
- Set the valve to "RINSE".
- Pompayı çalıştırın ve 30-60 saniye boyunca durulayın.
- Pompayı kapatın.
- Set the valve to "FILTER".
- Normal filtrasyon işlemine devam etmek için pompayı çalıştırın.
4.2. Kışa Hazırlık (uygulanabilirse)
In colder climates, proper winterization is essential to prevent freeze damage.
- Drain all water from the filter tank by opening the drain valve.
- Remove the manometer and store it in a warm, dry place.
- Set the multi-port valve handle between two positions (e.g., between "FILTER" and "CLOSED") to relieve pressure on the internal seal.
- Disconnect all plumbing and store pipes if necessary.
5. Sorun Giderme
Bu bölümde, kum filtrenizle ilgili karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Low water flow / High pressure gauge reading | Clogged filter media; dirty pump strainer basket; closed valve. | Backwash the filter; clean pump strainer basket; ensure all valves are open. |
| Bulanık havuz suyu | Insufficient filtration time; dirty filter media; improper chemical balance; damaged internal components. | Increase filtration time; backwash/rinse filter; check pool chemistry; inspect filter internals for damage. |
| Vanadan su sızıyor. | Worn O-rings or gaskets; loose clamp. | Inspect and replace O-rings/gaskets; tighten clamp. |
| Kum havuza geri dönüyor | Damaged laterals inside filter; improper rinsing after backwash. | Perform a thorough rinse cycle; inspect and replace damaged laterals. |
6. Teknik Özellikler
Detailed specifications for the Astralpool Aster 99- Sand Filter (Ø 500 model).
- Modeli: Aster 99- Ø 500
- Yapı Malzemesi: Laminated Polyester and Fiberglass
- Valf Tipi: Lateral Selector Valve
- Dahil Aksesuarlar: Manometer, Drain Valve
- Maksimum Çalışma Basıncı: 2.5 kg/cm²
- Maximum Filtration Capacity: 50 m³/saat/m²
6.1. Dimensions (for Ø 500 model)
| Boyut | Değer (mm) |
|---|---|
| Ø (Diameter) | 500 |
| D (Overall Diameter) | 500 |
| H (Yükseklik) | 855 |
| M (Valve Height from Base) | 415 |
| N (Lower Port Height from Base) | 290 |
| K (Port Size) | 1 1/2" |
Note: Dimensions are approximate and subject to manufacturing tolerances. Refer to Figure 1 for visual representation of dimensions.
7. Garanti Bilgileri
Specific warranty details for Astralpool products are typically provided at the point of purchase or within separate warranty documentation. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the official Astralpool websiteyi ziyaret edin veya yetkili satıcınızla iletişime geçin.
8. Müşteri Desteği
For technical assistance, spare parts, or further inquiries regarding your Astralpool Aster 99- Sand Filter, please contact your local Astralpool dealer or visit the official Astralpool webalan.
Astralpool Official Webalan: www.astralpool.com
