Behringer P2 Ultra-Compact Personal In-Ear Monitor Amplifier Kullanım Kılavuzu

giriiş

The Behringer P2 Ultra-Compact Personal In-Ear Monitor Amplifier is designed for musicians who require personal monitoring in various performance and studio environments. This device provides convenient control over your in-ear monitor mix directly at your fingertips, offering a powerful, lightweight, and user-friendly solution.

Ürün Özellikleri

• Ultra Kompakt Tasarım: Lightweight and portable, ideal for musicians on stage veya stüdyoda.
• Personal Control: Allows musicians to control their monitor volume directly.
• Versatile Headphone Output: Features a standard 3.5 mm (1/8") stereo output jack for headphones, earbuds, or custom in-ear monitors.
• Secure Input Connector: XLR / TRS combo input connector with a locking mechanism to prevent accidental disconnections.
• Mono/Stereo Anahtarı: Internal switch to select between mono for mixer aux sends or stereo for headphone outputs.
• High-Quality Volume Control: Detented level control with an on/off switch for precise volume adjustment and long-term durability.
• Entegre Kemer Klipsi: Convenient built-in belt clip for easy attachment to clothing or instrument straps.

Kurmak

1. Pil Kurulumu

The P2 amplifier operates on a 9V battery (not included). To install or replace the battery:

1. Locate the battery compartment release button on the side of the unit.
2. Press the button and slide the outer casing downwards to reveal the battery compartment.
3. Doğru kutuplara dikkat ederek yeni bir 9V pil takın.
4. Slide the outer casing back into place until it clicks securely.

Image: The Behringer P2 with its outer casing removed, showing the internal battery compartment and the mono/stereo switch.

2. Ses Kaynağına Bağlanma

The P2 features a locking XLR / TRS combo input. This allows for connection to various audio sources such as a mixer's auxiliary send or a headphone output.

1. Connect your audio source (e.g., mixer output) to the XLR / TRS combo input at the bottom of the P2. The locking mechanism ensures a secure connection. To release, press the small tab next to the connector.
2. For stereo sources, use an XLR-to-TRS or TRS-to-TRS (male to male) cable.

Image: Close-up of the locking XLR / TRS combo input on the Behringer P2.

3. Connecting Headphones/IEMs

Connect your headphones, earbuds, or in-ear monitors to the 3.5 mm (1/8") stereo output jack located at the top of the P2 unit.

Resim: Üst view of the Behringer P2, highlighting the 3.5 mm headphone output jack.

Kullanım Talimatları

1. Açma/Kapatma ve Ses Kontrolü

The P2 features a combined power on/off switch and volume control knob.

1. To power on the unit, rotate the top-mounted volume knob clockwise until you hear a click. The battery indicator LED will illuminate.
2. Ses seviyesini artırmak için saat yönünde döndürmeye devam edin.
3. Cihazı kapatmak için, düğmeyi tık sesi duyana kadar saat yönünün tersine çevirin.

Image: The top of the Behringer P2, showing the volume control knob and battery indicator light.

2. Mono/Stereo Mode Selection

An internal switch allows you to select between mono and stereo operation, depending on your audio source.

1. To access the switch, slide open the outer casing as described in the "Battery Installation" section.
2. Locate the small switch labeled "STEREO / MONO" inside the unit.
3. Set the switch to "MONO" if using a single mono source (e.g., a mixer's aux send).
4. Set the switch to "STEREO" if using a stereo source (e.g., a headphone output from a device).
5. Close the outer casing securely after making your selection.

3. Kemer Klipsini Kullanma

The integrated belt clip allows for convenient placement of the P2 during use.

• Attach the P2 to your waistband, belt, or instrument strap for easy access to volume control.

Resim: Yan view of the Behringer P2, illustrating the integrated belt clip.

Bakım

• Temizlik: Cihazın dış yüzeyini temizlemek için yumuşak, kuru bir bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmaktan kaçının.
• Pil Bakım: Remove the 9V battery if the unit will not be used for an extended period to prevent leakage.
• Depolamak: Store the P2 in a cool, dry place away from direct sunlight and extreme temperatures.

Sorun giderme

• Ses Yok:
  • Ensure the unit is powered on and the volume knob is turned up.
  • Check the battery indicator; replace the 9V battery if it's dim or off.
  • Verify all audio cables are securely connected to both the P2 and the audio source.
  • Ses kaynağının aktif olduğunu ve sinyal gönderdiğini doğrulayın.
  • Check the Mono/Stereo switch setting matches your audio source.
• Bozuk Ses:
  • Reduce the volume on the P2 and/or the audio source.
  • Ensure the audio source signal is not too strong for the P2 input.
  • Check the audio cables for damage.
• Aralıklı Ses:
  • Tüm kablo bağlantılarında gevşeklik olup olmadığını kontrol edin.
  • Pili değiştirin.
  • Inspect cables for damage or wear.

Özellikler

Resmi Ürün Videosu

Garanti ve Destek

For warranty information, please refer to the official Behringer webalan: http://www.music-group.com/warranty.aspx

Manufacturer Contact Information: Behringer