Zooz Momentary Push-Button in-Wall Switch ZAC99 Instruction Manual

Ürün Bittiview

The Zooz ZAC99 is a momentary push-button in-wall switch designed for various applications requiring temporary contact closure. It is suitable for controlling devices such as garbage disposals or as an accessory switch for Z-Wave dimmer modules to enable local dimming control. This device is not a Z-Wave switch itself but functions as a momentary contact switch.

Temel Özellikler:

• Çok Yönlü Uygulama: Can be used for garbage disposals or as a local control for Z-Wave dimmer modules.
• Momentary Control: Activates a connected device only while the button is pressed.
• Esnek Kurulum: Compatible with 14 AWG and 12 AWG wires, supporting loads up to 15 A.
• Kompakt Tasarım: İnce profesyonelfile allows for easier installation in standard switch boxes.

Resim: Ön view of the Zooz ZAC99 Momentary Push-Button in-Wall Switch. This image shows the white paddle-style button and the mounting frame.

Güvenlik Bilgileri

• UYARI: Risk of Electric Shock. All service should be performed by qualified personnel only.
• Kurulumdan önce devre kesiciden veya sigorta kutusundan elektriği kesin.
• Tüm kablo bağlantılarının güvenli olduğundan ve yerel elektrik yönetmeliklerine uyduğundan emin olun.
• Bu cihaz yalnızca iç mekanda kullanıma yöneliktir.
• 15'luk maksimum yük değerini aşmayın Amps.

Kurulum (Setup)

Follow these steps for safe and proper installation of your Zooz ZAC99 Momentary Push-Button in-Wall Switch.

1. Gücü Kapatın: Anahtarın yerini kontrol eden devre kesiciyi bulun ve gücü kapatın. Ses seviyesini kontrol ederek gücün kapalı olduğunu doğrulayın.tage test cihazı.
2. Mevcut Anahtarı Kaldır: Carefully remove the wall plate and unscrew the existing switch from the electrical box. Disconnect the wires from the old switch.
3. Kabloları Tanımlayın:
   • (Fazla) Hat: Typically black, brings power from the circuit breaker.
   • Yük Teli: Typically black, connects to the light fixture or appliance.
   • Topraklama kablosu: Bare copper or green, connects to the electrical box or ground screw.
4. Wire the ZAC99 Switch:
   

   Resim: Arka view of the Zooz ZAC99 switch, illustrating the screw terminals for wiring connections.

   • Connect the Line (Hot) wire to one of the screw terminals on the ZAC99 switch.
   • Connect the Load wire to the other screw terminal on the ZAC99 switch.
   • Connect the Ground wire to the green ground screw on the switch or the electrical box.
   • Ensure all connections are tight and secure. The switch accepts 14 AWG and 12 AWG wires.
5. Anahtarı Monte Edin: Kablolu anahtarı dikkatlice elektrik kutusuna itin. Birlikte verilen vidalarla sabitleyin.
6. Duvar Plakasını Takın: Attach the wall plate over the switch.
7. Gücü Geri Yükle: Sigortadan elektriği tekrar açın.

Not: This switch is a momentary contact switch. It does not have a neutral wire connection and is designed for simple on/off momentary control. For advanced functionality with Z-Wave dimmer modules, refer to the specific instructions for your Z-Wave device regarding momentary switch configuration.

Kullanım Talimatları

The Zooz ZAC99 switch provides momentary control based on its application.

For Garbage Disposals or Similar Devices:

• Etkinleştirmek: Press and hold the upper part of the paddle switch. The connected device (e.g., garbage disposal) will remain active as long as the button is held.
• Devre Dışı Bırakmak için: Release the button. The device will turn off.

When Used with a Z-Wave Dimmer Module (Accessory Control):

When configured with a compatible Z-Wave dimmer module (e.g., Aeotec ZW111, Fibaro FGD-212, Qubino ZMNHDD3, ZMNHWD3), the ZAC99 can provide local control for lighting.

• Açma/Kapatma: Tap the upper part of the paddle switch once to toggle the light on or off.
• Parlaklığı Ayarla: Press and hold the upper part of the paddle switch to adjust the brightness. Release when the desired brightness level is reached.

Önemli: The Z-Wave dimmer module must be configured to recognize a momentary switch for this functionality. Refer to your Z-Wave dimmer module's instruction manual for specific configuration settings (e.g., parameter settings for momentary switch type).

Bakım

The Zooz ZAC99 switch requires minimal maintenance.

• Temizlik: Anahtarı temizlemek için yumuşak bir bezle silin.amp Bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın. Temizlemeden önce elektrik bağlantısının kesildiğinden emin olun.
• Periyodik Kontroller: Periodically check the wall plate and switch for any signs of damage or loose connections. If any issues are observed, turn off power and consult a qualified electrician.

Sorun giderme

If you experience issues with your ZAC99 switch, refer to the following common solutions:

• Cihaz Yanıt Vermiyor:
  • Ensure power is supplied to the switch at the circuit breaker.
  • Tüm kablo bağlantılarının sağlam ve doğru olduğundan emin olun.
  • Check the connected load (e.g., garbage disposal) to ensure it is functioning correctly.
• Not Controlling Z-Wave Dimmer Module:
  • Confirm that the Z-Wave dimmer module is properly installed and powered.
  • Ensure the Z-Wave dimmer module is configured to operate with a momentary switch. This usually involves adjusting a parameter in your Z-Wave hub or controller settings. Refer to the dimmer module's manual for specific instructions (e.g., Zooz Zen72, Option 19, set to Momentary switch).
  • Verify the wiring between the ZAC99 and the Z-Wave dimmer module is correct according to the dimmer module's accessory switch wiring diagram.
• Switch Feels Stiff or Hard to Press:
  • The switch is designed for a tactile click. If it feels unusually stiff or unresponsive, ensure it is properly seated in the electrical box and not obstructed by the wall plate.

Özellikler

Garanti ve Destek

For warranty information or technical support, please contact Zooz directly. Refer to the official Zooz website or your purchase documentation for the most current support contact details and warranty terms.

Marka: ZOOZ

Üretici: ZOOZ

Webalan: Visit the ZOOZ Store on Amazon