SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Giriş

Satın aldığınız için teşekkür ederizasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Temel Özellikler

One-stop gig solution for classic rock players with all necessary core effects.
Analog Plexi-style distortion for 80s/90s hard rock tones.
Analog BBD-style chorus for warm, dreamy soundscapes.
500ms analog voice delay and high-quality reverb for expansive, spacy tones.
Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Kutuda Neler Var?

SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
XLR Kablosu
Güç Adaptörü (9V DC)
Kullanıcı Kılavuzu

4. Kurulum Talimatları

4.1 Güç Bağlantısı

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Ses Bağlantıları

Gitar Girişi: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
Çıktı Amplifier/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
Kulaklık Çıkışı: For silent practice, connect headphones to the 'PHONES' jack.

SONICAKE RockStage pedal with input and output jacks — Şekil 1: Üzeriview of the SONICAKE RockStage pedal, showing input, output, and power connections.

SONICAKE RockStage pedal connected to guitar and ampcankurtaran — Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Kullanım Talimatları

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Effect Modules

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb — Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.

Koro: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
Kaynak Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
Gecikme: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
Yankılanma: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted — Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stagortamlar.

SONICAKE RockStage pedal showing illuminated LED knobs — Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Taşınabilirlik

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag — Figure 6: The compact design allows for easy transport and setup.

6. Özellikler

Özellik	Detay
Marka	SONICAKE
Model Adı	KAYALARTAGE (QCE-10)
Boyutlar	40 cm Uzunluk x 7 cm Genişlik x 5.5 cm Yükseklik
Cilttage	9 Volt
Ampöfke	20 Miliampburada
Ses Çıkışı Efektleri	Overdrive, Distortion, Chorus, Reverb, Delay
Kontrol Türü	Düğme, Topuz
Güç Kaynağı	Kablolu Elektrik
Donanım Arayüzü	Multiple Audio
Sinyal Biçimi	Analog
Bağlayıcı Türü	3.5 mm Ses Jack
Menşei ülke	Çin

7. Bakım

Temizlik: Use a soft, dry cloth to clean the pedal. Avoid using abrasive cleaners or solvents.
Depolamak: Pedalı serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
İşleme: Pedala aniden basmaktan veya sert darbelere maruz bırakmaktan kaçının.
Güç: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8. Sorun Giderme

Ses Yok:
- Tüm kabloların güvenli bir şekilde bağlandığından emin olun.
- Verify the power adapter is correctly plugged in and providing power.
- Check your guitar and amplifier volume settings.
- Bağlantı hatalarını elemek için farklı kablolarla test edin.
İstenmeyen Gürültü/Uğultu:
- Ensure you are using the correct power adapter.
- Farklı bir priz kullanmayı deneyin.
- Keep the pedal away from other electronic devices that may cause interference.
Effect Not Activating:
- Press the footswitch firmly. The LED should illuminate.
- Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Garanti ve Destek

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a 1 yıl ürün garantisi satın alma tarihinden itibaren.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE webalan.