Kullanım Kılavuzu

giriiş

This manual provides detailed instructions for the installation, operation, and maintenance of your Westgate Lighting LED Outdoor Motion Sensor. This accessory is designed to enhance the functionality of outdoor lighting fixtures by providing automatic light activation based on motion detection, ideal for security and convenience.

Resim: Yan view of the Westgate LED Outdoor Motion Sensor, showcasing its compact design and durable polycarbonate construction.

Güvenlik Bilgileri

Kurulum ve çalıştırmadan önce lütfen tüm güvenlik talimatlarını dikkatlice okuyun. Bu talimatlara uyulmaması elektrik çarpmasına, yangına veya diğer tehlikelere yol açabilir.

• Always disconnect power at the circuit breaker before installing or servicing the unit.
• Installation should be performed by a qualified electrician or trained personnel in accordance with all local and national electrical codes.
• Do not install if the product is damaged. Inspect the unit for any damage prior to installation.
• This product is designed for outdoor use only. Ensure all connections are properly sealed to prevent water ingress.
• 200W olan azami yük kapasitesini aşmayın.

Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Westgate LED Outdoor Motion Sensor Unit (1)
• Mounting Hardware (Screws, Wire Nuts, Gasket) (1 set)

Kurulum ve Yükleme

Follow these steps for proper installation of your motion sensor:

1. Kurulum Alanını Hazırlayın: Ensure power is OFF at the circuit breaker. Choose a mounting location that provides an unobstructed view of the area to be monitored. The sensor features 1/2 NPT threads for easy integration with standard outdoor light fixtures or junction boxes.
2. Sensörü Monte Edin: Thread the sensor's 1/2 NPT connection into the desired fixture or junction box. Ensure it is securely tightened to prevent movement and maintain weather resistance.


Resim: Yakın çekim view of the motion sensor's 1/2 NPT threads, designed for secure attachment to compatible fixtures or conduit.

3. Kablo Bağlantıları: Connect the sensor's wires to your lighting fixture and power supply according to the wiring diagram provided with your lighting fixture or by a qualified electrician. Typically, this involves connecting the Line (Hot), Load (to light), and Neutral wires. Ensure all connections are secure and insulated with wire nuts.
4. Seal and Secure: After wiring, ensure all openings are properly sealed to prevent moisture entry. Position the sensor head to cover the desired detection area.
5. Gücü Geri Yükle: Kurulum tamamlandıktan ve tüm bağlantılar güvenli hale getirildikten sonra devre kesicideki gücü geri yükleyin.

Kullanım Talimatları

The motion sensor features adjustable settings for optimal performance:

Resim: Alt view of the motion sensor, showing the "SENSITIVITY" and "TIMER" adjustment dials for customizing detection and light duration.

• Hassasiyet Ayarı: Use the "SENSITIVITY" dial to adjust the detection range. Turning the dial clockwise increases sensitivity and detection range (up to 70 feet), while turning it counter-clockwise decreases it. Start with a medium setting and adjust as needed to avoid false triggers.
• Zamanlayıcı Ayarı: Use the "TIMER" dial to set how long the light remains on after motion is detected and stops. The delay can be adjusted up to 300 seconds (5 minutes). Turn clockwise for longer durations, counter-clockwise for shorter durations.
• Test modu: For initial setup and aiming, set the "TIMER" dial to the "TEST" position. In this mode, the light will turn on for a few seconds each time motion is detected, regardless of ambient light levels. This allows you to walk through the detection area and confirm coverage.
• Otomatik mod: Once testing is complete, set the "TIMER" dial to your desired duration. The sensor will now operate in auto mode, activating the light only when motion is detected and ambient light levels are low enough (dusk to dawn operation).
• Manuel Geçersiz Kılma: This sensor supports a manual override feature. To activate, quickly flip the power switch (connected to the sensor) OFF and ON within 3 seconds. The light will then stay on continuously. To return to auto mode, flip the power switch OFF and ON again within 3 seconds, or the sensor will automatically reset to auto mode after 8 hours.

Bakım

The Westgate motion sensor requires minimal maintenance:

• Temizlik: Sensör merceğini periyodik olarak yumuşak bir bezle silin.amp cloth to remove dust, dirt, or debris that may obstruct its view. Aşındırıcı temizleyiciler veya solventler kullanmayın.
• Denetleme: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the sensor is still securely mounted.

Sorun giderme

If your motion sensor is not functioning as expected, refer to the following common issues and solutions:

Özellikler

Garanti ve Destek

This Westgate Lighting product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Westgate webalan.

For technical support, troubleshooting assistance, or warranty claims, please contact Westgate customer service:

• Webalan: www.westgatemfg.com (Not: Bu bir yer tutucudur URL, doğru iletişim bilgileri için lütfen gerçek ürün belgelerine bakın.)
• Telefon: Üreticinin talimatlarına bakın. website veya ürün ambalajı.

Please have your model number (SL-PIR-WH or ec80a918-4949-4a1d-81e0-21bc5ec2a857) and date of purchase ready when contacting support.