Defiant DFI-5852-BK 180 Degree Black Motion Activated Outdoor Flood Light

Ürün Bittiview

The Defiant DFI-5852-BK is an advanced LED motion floodlight designed to enhance safety and security for outdoor spaces. It delivers 1200 Lumens of bright illumination and features a 180-degree motion-activated sensor. This unit incorporates Motion-Off technology, allowing the motion sensor to be bypassed, enabling a dusk-to-dawn operation mode via its internal photocell. With durable LED technology, there is no need for bulb replacement, offering a long-lasting lighting solution. Installation is simplified with three easy steps, supporting both wall and eave mount applications.

An image showing the Defiant DFI-5852-BK flood light. It features two round LED lamp heads mounted on an adjustable arm, with a motion sensor unit positioned below them. The light is black in color.

Önemli Güvenlik Talimatları

Lütfen kurulum işlemine başlamadan önce tüm talimatları okuyun ve anlayın. Bu talimatlara uyulmaması elektrik çarpmasına, yangına veya yaralanmaya ya da maddi hasara neden olabilecek diğer tehlikelere yol açabilir.

• Always disconnect power at the fuse or circuit breaker before installing or servicing the fixture.
• Kurulum sürecinden emin değilseniz, kalifiye bir elektrikçiye danışın.
• Tüm elektrik bağlantılarının yerel yönetmeliklere, kanunlara ve Ulusal Elektrik Koduna (NEC) uygun olarak yapıldığından emin olun.
• This fixture is designed for outdoor use and is water resistant. However, ensure proper sealing during installation to prevent water ingress.
• Do not attempt to disassemble or modify the LED light heads, as they contain non-replaceable LEDs.
• Avoid looking directly into the light source when illuminated, as it may cause eye strain or damage.

Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Defiant DFI-5852-BK Flood Light Unit
• Montaj Braketi
• Montaj Donanımı (vidalar, kablo somunları, conta)
• Kullanım Kılavuzu (bu belge)

Kurulum Kılavuzu

The Defiant DFI-5852-BK flood light is designed for straightforward installation, typically completed in three easy steps. It can be mounted on either a wall or an eave.

Montaj Seçenekleri

• Duvar montajı: Secure the fixture directly to a vertical wall surface.
• Saçak Dağı: Secure the fixture to an overhang or horizontal eave surface.

Genel Kurulum Adımları

1. Kablolamayı Hazırlayın: Turn off power at the circuit breaker. Remove the existing fixture (if any) and expose the electrical box wiring.
2. Montaj Braketini Takın: Secure the provided mounting bracket to the electrical box. Ensure the bracket is oriented correctly for your chosen mounting option (wall or eave).
3. Kablolamayı Bağlayın: Connect the flood light's wires to your household wiring using wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
4. Montaj Fikstürü: Carefully align the flood light unit with the mounting bracket and secure it in place with the provided screws. Ensure the gasket creates a tight seal against the mounting surface to prevent water intrusion.
5. Seal (if necessary): Apply a bead of silicone caulk around the base of the fixture where it meets the mounting surface for added weather protection, especially on uneven surfaces.
6. Gücü Geri Yükle: Sigortadan elektriği tekrar açın.

Note: For detailed diagrams and specific instructions, refer to the included printed manual.

Kullanım Talimatları

Hareketle Etkinleştirilen Mod

The flood light features a 180-degree motion-activated sensor that detects movement within its range, automatically turning on the light. The light will remain on for the set duration after motion is no longer detected.

Motion-Off / Dusk-to-Dawn Mode

This flood light includes a unique Motion-Off technology. By adjusting the sensor settings, you can disable the motion detection feature. In this mode, the internal photocell will activate the light at dusk and turn it off at dawn, providing continuous illumination throughout the night.

Ayarlamalar

• Sensör Hassasiyeti: The motion sensor's sensitivity can be adjusted to detect movement up to 40 feet away. Adjust this setting to prevent unwanted activations from distant objects or small animals.
• Zamanında: The duration for which the light remains on after motion is detected can be adjusted up to 10 minutes. Set this to your preferred illumination period.
• Tool-less Lamp Kafa Ayarı: The twin round lamp heads can be easily adjusted without tools to direct the light precisely where needed.

Bakım ve Onarım

The Defiant DFI-5852-BK flood light utilizes integrated LED technology, meaning there are no bulbs to change. This significantly reduces maintenance requirements.

• Temizlik: To clean the fixture, ensure power is off. Wipe the surface with a soft, damp Bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın, çünkü bunlar yüzeye veya elektrikli bileşenlere zarar verebilir.
• Denetleme: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly to ensure continued safe operation.

Sorun giderme

If you experience issues with your Defiant flood light, refer to the table below for common problems and their solutions.

Teknik Özellikler

Garanti ve Müşteri Desteği

This Defiant flood light is covered by a Üretici Garantisi. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty information provided with your purchase or contact Defiant customer support directly.

If you require assistance with installation, operation, or troubleshooting that is not covered in this manual, please contact Defiant customer service. Keep your purchase receipt and model number (DFI-5852-BK) readily available when contacting support.

Contact information for Defiant customer support can typically be found on the product packaging, the manufacturer's official websiteye veya satın alma belgelerinize bakın.