Autel MaxiCOM MK808S OBD2 Diagnostic Tool User Manual

1. Giriş

The Autel MaxiCOM MK808S is an advanced OBD2 diagnostic tool designed for comprehensive vehicle system analysis. This device offers a wide range of functions including bi-directional control, over 28 service functions, and extensive vehicle compatibility for both domestic and imported cars. It features a high-performance processor, a 7-inch LCD touchscreen, and ample memory for efficient operation.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your MaxiCOM MK808S. Please read it thoroughly before use to ensure proper and safe operation.

Figure 1: Autel MaxiCOM MK808S Diagnostic Tool.

2. Temel Özellikler

• Çift Yönlü Kontrol (Aktif Test): Perform active tests to pinpoint component failures quickly.
• 28'tan fazla Servis Fonksiyonu: Includes Oil Reset, EPB, SAS Reset, BMS Reset, DPF Regeneration, ABS Bleeding, TPMS, IMMO (Key Add/Reset), and more.
• Tam Sistem Tanılaması: Access and diagnose all electronic systems such as Engine, ABS, SRS, Transmission, and Brake System.
• Geniş Araç Uyumluluğu: Supports American cars (1996+), European cars (2001+), and a wide range of Japanese domestic and imported vehicles.
• Yüksek Performanslı Donanım: Equipped with an A9 processor, 7-inch LCD touchscreen, and 64GB memory for fast and stable operation.
• Düzenli Yazılım Güncellemeleri: Monthly software updates ensure compatibility with the latest vehicle models and continuous addition of new functions.
• Çoklu Dil Desteği: Supports Japanese and other languages, configurable in settings.

Figure 2: Comparison of MaxiCOM MK808 series models, highlighting MK808S features.

3. Kurulum

3.1 Initial Power-On and Language Setting

1. Upon first use, power on the device. The default language is English.
2. 'Ayarlar' menüsüne gidin.
3. Select 'Language' and choose 'Japanese' (or your preferred language). If a serial number is required for language change, please contact customer support.

3.2 Ağ Bağlantısı

A stable internet connection is required for initial setup, software updates, and vehicle data downloads.

1. Go to 'Settings' and select 'Wi-Fi'.
2. Choose your Wi-Fi network and enter the password to connect.

3.3 Account Registration and Software Update

Before performing diagnostics, it is crucial to register your device and download the necessary vehicle data and software updates.

1. Follow the on-screen prompts to create an Autel account. This typically involves email verification and setting a password.
2. Once registered, proceed to download the vehicle data. This process can take a significant amount of time depending on your internet speed and the number of vehicle manufacturers selected. It is recommended to perform this when you have ampzaman.
3. After the initial data download, update the operating system and application software. Regularly check for updates to ensure optimal performance and compatibility with new vehicle models.

Figure 3: The device supports over 13 languages for user interface.

4. Kullanım Talimatları

4.1 Araca Bağlantı

1. Locate the vehicle's OBD2 port, usually under the dashboard on the driver's side.
2. Connect the diagnostic cable from the MaxiCOM MK808S to the vehicle's OBD2 port.
3. Aracın kontak anahtarını 'AÇIK' konumuna getirin (motor kapalı).

4.2 Tam Sistem Tanılaması

The MK808S can perform a comprehensive scan of all available electronic systems in the vehicle.

1. Ana menüden 'Teşhis'i seçin.
2. The device will attempt to automatically identify the vehicle using AutoVIN technology. If unsuccessful, you may need to manually select the vehicle make, model, and year.
3. Choose 'Auto Scan' to perform a full system scan. The tool will read fault codes, display live data, and identify any issues.
4. After the scan, you can view detailed diagnostic trouble codes (DTCs) and their descriptions.
5. To clear fault codes and turn off warning lights (e.g., Check Engine Light), select the 'Erase Codes' option after addressing the underlying issue.

Figure 4: Full system diagnosis and AutoVIN scan interface.

4.3 Active Test (Bi-directional Control)

Active tests allow you to send commands to vehicle systems and components to test their functionality.

1. After selecting the vehicle, navigate to the 'Active Test' or 'Bi-directional Control' menu.
2. Select the specific component or system you wish to test (e.g., fuel pump, cooling fan, throttle body).
3. Follow the on-screen instructions to activate the component and observe its response. This helps in quickly identifying faulty parts.

Şekil 5: Ör.ample of an active test for bi-directional control.

4.4 Hizmet Fonksiyonları

The MK808S provides access to over 28 common maintenance and service functions.

1. Ana menüden 'Servis'i seçin.
2. Choose the desired service function (e.g., 'Oil Reset', 'EPB', 'TPMS', 'IMMO').
3. Follow the specific on-screen instructions for each function. Some functions may require additional steps or specific vehicle conditions.

Şekil 6: Üzeriview of 28+ hot service functions available.

4.5 FCA AutoAuth Service

For FCA vehicles (Chrysler, Jeep, Dodge, Fiat, etc.) from 2018 onwards, the MK808S supports the FCA AutoAuth service for secure gateway access. This allows for advanced diagnostics and special functions on these vehicles.

1. Ensure your device software is up-to-date.
2. Follow the prompts on the device to register for or log in to your AutoAuth account.
3. Once authenticated, you will gain full diagnostic capabilities for supported FCA vehicles.

Figure 7: AutoAuth service integration for FCA vehicles.

4.6 MV105/MV108 Compatibility

The MaxiCOM MK808S is compatible with Autel's MV105/MV108 digital inspection cameras (sold separately). These cameras can be connected to the diagnostic tool to provide visual inspection of hard-to-reach areas of the vehicle.

1. Connect the MV105/MV108 camera to the USB port on the MK808S.
2. Select the 'Digital Inspection' or 'MV105/MV108' application from the main menu.
3. Use the camera to inspect engine components, internal parts, or other areas, viewing the live feed on the MK808S screen.

Figure 8: MaxiCOM MK808S compatibility with MV105/MV108 inspection cameras.

5. Bakım

5.1 Cihaz Bakımı

• Cihazınızı temiz ve tozdan ve nemden uzak tutun. Temizlik için yumuşak ve kuru bir bez kullanın.
• Cihazı uzun süre aşırı sıcaklıklara veya doğrudan güneş ışığına maruz bırakmaktan kaçının.
• Cihazı kullanılmadığı zamanlarda fiziksel hasardan korumak için güvenli bir yerde saklayın.

5.2 Yazılım Güncellemeleri

Regular software updates are crucial for maintaining optimal performance, expanding vehicle coverage, and adding new features.

• Cihazı sabit bir internet bağlantısına bağlayın.
• From the main menu, tap the 'Update' icon.
• Select all available updates and download them. This process may take some time.
• Ensure the device has sufficient battery charge or is connected to power during updates to prevent interruption.

5.3 Pil Yönetimi

• Pil sağlığını korumak için cihazı düzenli olarak şarj edin.
• Pilin sık sık tamamen bitmesini önleyin.
• If storing the device for an extended period, ensure it is charged to about 50-70%.

6. Sorun Giderme

7. Özellikler

• Modeli: MaxiCOM MK808S
• İşlemci: A9 Quad-Core 1.8GHz
• İşletim Sistemi: Android 11
• Hafıza: 4GB RAM, 64GB ROM
• Görüntülemek: 7-inch LCD Capacitive Touchscreen (1024x600 resolution)
• Bağlantı: Wi-Fi (2.4 & 5 GHz), USB
• Güç Kaynağı: Pil ile çalışan
• Araç Arayüzü: OBD2 (Universal Fit)
• UPC: 713830339010
• ASIN: B075FKQG5M

Figure 9: Hardware specifications and performance details of the MK808S.

8. Garanti ve Destek

8.1 Garanti Bilgileri

The Autel MaxiCOM MK808S comes with a 1 yıllık kalite garantisi. In the event of any manufacturing defects or malfunctions during this period, free repair services will be provided. Please retain your proof of purchase for warranty claims.

8.2 Yazılım Güncellemeleri

Eğlence 1 year of free software updates from the date of purchase. After the free update period ends, any vehicle data already downloaded will remain accessible and usable. Continued updates may require a subscription.

8.3 Müşteri Desteği

For technical assistance, warranty claims, or any questions regarding your Autel MaxiCOM MK808S, please contact Autel customer support. Support is optimized for the Japanese market to ensure prompt and effective assistance.

• Refer to the contact information provided with your product packaging or visit the official Autel webDestek ayrıntıları için site.
• When contacting support, please have your device's serial number and a detailed description of the issue ready.