Parçasam 185218

Partsam 2Pcs Red Amber LED Trailer Fender Lights Instruction Manual

Modeli: 185218

Marka: Partsam

1. Giriş

This manual provides instructions for the installation, operation, and maintenance of your Partsam 2-piece Red and Amber LED Trailer Fender Lights. These lights are designed to enhance visibility and safety for trailers over 80 inches wide, serving as both front amber clearance lights and rear red clearance lights. They feature a pre-wired assembly with sealed, waterproof lenses for durability.

2. Ürün Özellikleri

  • Set includes one right and one left fender light.
  • Integrated amber LED for front clearance and red LED for rear clearance.
  • Pre-wired assembly for simplified installation.
  • Designed for mounting on top or side of trailer fenders.
  • Sealed, waterproof lenses ensure durability in various weather conditions.
  • DOT Compliant for legal use on trailers.
  • Düşük profesyonelfile single-diode LED lamps.

3. Güvenlik Bilgileri

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in property damage or personal injury.

  • Herhangi bir elektrik işlemi yapmadan önce aracın aküsünü ayırın.
  • Kısa devreleri önlemek için tüm kablo bağlantılarının sağlam ve uygun şekilde yalıtılmış olduğundan emin olun.
  • Verify that the lights are correctly oriented (amber facing front, red facing rear) as per DOT regulations.
  • Belirtilen hacmi aşmayıntage ışıklar için.
  • Kurulum sürecinin herhangi bir aşamasından emin değilseniz, yetkili bir teknisyene danışın.

4. Kurulum ve Kurulum

These fender lights are designed for straightforward installation on most trailers. No screws are included in the package.

4.1 Bileşenler Üzerindeview

Two Partsam LED trailer fender lights, one showing amber light and the other red light, with illuminated versions above.
Şekil 1: Üzeriview of the Partsam LED Trailer Fender Lights. The image displays two fender lights, each with an amber and a red LED. Above them are close-ups of the lights illuminated, showing the distinct amber and red beams.

4.2 Boyutlar

Refer to the diagram below for detailed product dimensions to ensure proper fitment on your trailer fender.

Dimensional drawing of the Partsam LED trailer fender light, showing length, width, and height measurements.
Figure 2: Product Dimensions. This diagram provides precise measurements for the fender light, including its length (6.5 inches), width (2.13 inches), and thickness (0.87 inches), aiding in installation planning.

4.3 Montaj Talimatları

  1. Montaj Konumunu Seçin: Choose a suitable location on the top or side of your trailer fender. The lights are designed to mark the widest point of your trailer.
  2. Konumlandırma: Ensure the amber LED faces towards the front of the trailer and the red LED faces towards the rear.
  3. Işığı Güvence Altına Alın: Use appropriate self-tapping screws (not included) to secure the light assembly to the fender through the designated mounting holes.
  4. Tel Yönlendirme: The light assembly includes a channel to hide the wiring, guiding it down into the fender for a clean installation.

4.4 Kablolama Şeması

The Partsam fender lights feature a 2-wire design for power and ground connections.

  • Siyah Tel: Positive (+) connection for power.
  • Beyaz Tel: Negative (-) connection for ground.

Connect these wires to your trailer's existing wiring system, ensuring proper polarity. It is recommended to use heat-shrink butt splices for secure and weather-resistant connections.

Kapatmak view of the back of a Partsam LED trailer fender light, showing the black and white wiring for power and ground.
Figure 3: Wiring Connections. This image shows the pre-wired black and white leads extending from the back of the fender light, ready for connection to the trailer's electrical system.
Alt view of a Partsam LED trailer fender light, highlighting the mounting holes and the integrated wiring channel.
Şekil 4: Alt taraf View with Wiring Channel. This view illustrates the design of the light's base, including the two mounting screw holes and the integrated channel for routing the electrical wires discreetly along the fender.

For a visual guide on the product, consider watching the official product video:

Video 1: Partsam One Pair Trailer Fender Marker Lights. This video provides a general overview of the Partsam trailer fender marker lights, demonstrating their appearance and potential application.

5. Operasyon

Once properly installed and wired, the Partsam LED Trailer Fender Lights will operate in conjunction with your trailer's running lights. The amber LED will illuminate towards the front, and the red LED will illuminate towards the rear, providing continuous clearance marking.

Close-up of a Partsam LED trailer fender light illuminated, showing the amber light facing left and the red light facing right.
Figure 5: Illuminated Fender Light (Amber Left, Red Right). This image shows one of the fender lights with its amber LED shining to the left and its red LED shining to the right, demonstrating its dual-color functionality.
Close-up of a Partsam LED trailer fender light illuminated, showing the red light facing left and the amber light facing right.
Figure 6: Illuminated Fender Light (Red Left, Amber Right). This image shows the other fender light with its red LED shining to the left and its amber LED shining to the right, illustrating the complementary orientation for a pair.

6. Bakım

These LED fender lights are designed for minimal maintenance. To ensure optimal performance and longevity:

  • Regularly inspect the lights for any physical damage or loose connections.
  • Clean the lenses periodically with a soft cloth and mild soap to remove dirt and debris that may obstruct light output. Avoid abrasive cleaners.
  • Check wiring for signs of wear, fraying, or corrosion, especially after exposure to harsh weather conditions.

7. Sorun Giderme

SorunOlası NedenÇözüm
Işıklar yanmıyorNo power supply, incorrect wiring, loose connection, faulty light.Check power source and fuses. Verify wiring polarity (black to positive, white to ground). Secure all connections. Test with a known good power source. Replace if faulty.
Işıklar loşDüşük hacimtage, poor ground connection, dirty lens.Yeterli hacim sağlamaktage supply. Check ground connection for corrosion or looseness. Clean the light lenses.
Moisture inside lensMühür uzlaşması.While lights are sealed, extreme conditions or damage can compromise. Inspect for cracks. If persistent, replacement may be necessary.

8. Özellikler

  • Marka: Parçalarsam
  • Model Numarası: 185218
  • Renk: Kehribar, Kırmızı
  • Belirli Kullanımlar: Çamurluk Işığı
  • Araç Hizmet Tipi: Fragmanlar
  • Özellik: Pre-wired fender light assembly, Front clearance (Amber LED), Rear (Red LED)
  • Netage: 5 watt
  • Otomotiv Parçası Pozisyonu: Ön
  • Lens Malzemesi: Plastik
  • Montaj Gerekli: HAYIR
  • Otomotiv Uyum Türü: Evrensel Uyum
  • Ürün Ağırlığı: 1 pound (set için)
  • Paket Boyutları: 8.46 x 6.22 x 1.3 inç
  • Güvenlik Derecelendirmesi: DOT Sertifikalı

9. Garanti ve Destek

For warranty information or technical support regarding your Partsam LED Trailer Fender Lights, please refer to the official Partsam webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Garanti talepleriniz için satın alma fişinizi saklayın.

You can visit the Partsam Store for more products and information: Partsam Store

© 2025 Partsam. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.