giriiş
Thank you for choosing the Orbit 6-Station Easy Dial Sprinkler Timer. This manual provides detailed instructions for the proper installation, programming, and maintenance of your new irrigation controller. Designed for ease of use, this timer helps you manage your watering schedules efficiently, ensuring your landscape receives optimal hydration while conserving water.
Please read this manual thoroughly before operating the timer to ensure correct setup and to maximize its features.
Şekil 1: Ön view of the Orbit 6-Station Easy Dial Sprinkler Timer, showing the large LCD screen and programming dial.
Önemli Güvenlik Bilgileri
- Herhangi bir kablolama veya bakım işlemi yapmadan önce daima gücü kesin.
- Do not install the timer in direct sunlight or in areas exposed to extreme temperatures.
- Tüm elektrik bağlantılarının sağlam ve nemden korunmuş olduğundan emin olun.
- This device is intended for outdoor use with irrigation systems only.
- Çocukların erişemeyeceği yerde saklayınız.
Paket İçeriği
Paketinizde tüm öğelerin mevcut olduğundan emin olun:
- Orbit 6-Station Easy Dial Sprinkler Timer Unit
- Montaj Donanımı (vidalar ve duvar dübelleri)
- Kullanım Kılavuzu (bu belge)
Kurulum ve Yükleme
1. Zamanlayıcının Montajı
- Choose a suitable location near an electrical outlet and away from direct sunlight or extreme weather.
- Use the provided mounting hardware to secure the timer to a wall or sturdy surface. Ensure it is level.
2. Wiring the Valves
Each irrigation valve has two wires. One wire from each valve connects to the common wire, and the other connects to a specific station terminal on the timer.
- Connect the common wire from your valves to the terminal labeled "COMMON" or "C" on the timer.
- Connect the remaining wire from each valve to its corresponding station terminal (e.g., Valve 1 to Station 1, Valve 2 to Station 2, etc.). The Orbit 6-Station timer supports up to six individual zones.
3. Gücü Bağlama
Plug the timer's power adapter into a standard electrical outlet. The LCD screen should illuminate, indicating power is supplied.
Kullanım Talimatları
The Easy Dial interface allows for intuitive programming. Rotate the dial to select different programming modes.
1. Geçerli Saat ve Tarihi Ayarlama
- kadranı çevirin SAAT AYARLA.
- Kullanın +/- Saati ayarlamak için düğmelere basın, ardından basın. SONRAKİ to move to minutes, and then to AM/PM.
- Basmak SONRAKİ to set the current year, month, and day using the +/- düğmeler.
2. Programming Watering Schedules (Programs A and B)
The timer offers two independent programs, A and B, allowing for different watering schedules for various zones or plant types.
- kadranı çevirin A PROGRAMI or B PROGRAMI.
- Başlangıç Saatlerini Ayarla: Basmak SONRAKİ to cycle through up to four start times per program. Use +/- to adjust. Set unused start times to OFF.
- Çalışma Sürelerini Ayarla: Basmak SONRAKİ. For each station (1-6), use +/- to set the watering duration from 1 minute to 240 minutes. Press SONRAKİ to move to the next station.
- Set Watering Days: Basmak SONRAKİ. Kullanmak +/- to select specific days of the week, or choose an interval (e.g., every 2nd day).
3. Smart Budgeting / Seasonal Adjust
This feature allows you to adjust all station run times in a program by a percentage, useful for seasonal changes without reprogramming each station individually.
- kadranı çevirin BÜTÇE.
- Kullanın +/- buttons to adjust the watering percentage from 10% to 200%. 100% is the programmed run time.
4. Manuel Sulama
To water manually outside of programmed schedules:
- kadranı çevirin KILAVUZ.
- Kullanmak +/- to select the station you wish to water and set its duration.
- Basmak BAŞLANGIÇ to begin manual watering. The timer will automatically return to the OTOMATİK position after manual watering is complete.
5. Yağmur Gecikmesi
Temporarily suspend watering for a set period due to rain or other reasons.
- kadranı çevirin YAĞMUR GECİKMESİ.
- Kullanmak +/- to select the number of days (24, 48, or 72 hours) you wish to delay watering.
- The timer will resume its programmed schedule automatically after the delay period.
Bakım
1. Temizlik
Wipe the timer's exterior with a damp Aşındırıcı temizleyiciler kullanmayın veya üniteyi suya batırmayın.
2. Yedek Pil (varsa)
Some models may include a battery compartment for program backup during power outages. If your model has this feature, replace batteries annually or when the low battery indicator appears. Refer to the battery compartment for specific battery type (e.g., 2 x AA batteries).
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Zamanlayıcı ekranı boş. | Güç yok ya da güç yoktage. | Check power connection. Ensure outlet is functional. If applicable, check battery backup. |
| Sprinklers do not turn on. | Timer not in AUTO mode, valves off, wiring issue, or low water pressure. | Ensure dial is set to AUTO. Check that water supply valves are open. Inspect wiring connections. Verify water pressure. |
| Timer waters at incorrect times. | Incorrect time/date setting or programming error. | Verify current time and date. Review program start times, run times, and watering days. |
| One station does not water. | Faulty valve, wiring issue for that station, or station not programmed. | Check wiring for the specific station. Manually test the valve. Ensure the station has a run time programmed. |
Özellikler
- Modeli: 57596
- Marka: Yörünge
- İstasyon Sayısı: 6
- Malzeme: Plastik
- Ağırlık: Yaklaşık 1.3 lbs (0.59 kg)
- Güç Girişi: Standard AC (refer to power adapter for specific voltage)
- UPC: 816602024845
Garanti Bilgileri
Orbit products are manufactured to high quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.
Müşteri Desteği
If you have any questions or require assistance with your Orbit 6-Station Easy Dial Sprinkler Timer, please contact Orbit customer support. Contact information can typically be found on the product packaging or the official Orbit webalan.