KERN PCD 6K-4 Hassas Laboratuvar Terazisi Kullanım Kılavuzu

1. Giriş

This manual provides essential instructions for the safe and efficient operation of your KERN PCD 6K-4 Precision Laboratory Balance. This laboratory scale features a separate weighing platform, making it ideal for use in specialized environments such as glove-bags or extractor cabinets, particularly when weighing toxic, volatile, or contaminated substances. It includes a PRE-TARE function for manual extraction of known container weights, useful for precise filling quantity controls.

Please read this manual thoroughly before initial use and keep it for future reference.

2. Güvenlik Talimatları

• Teraziyi daima titreşimden arındırılmış, sabit ve düz bir yüzey üzerinde çalıştırın.
• Avoid exposing the balance to extreme temperatures, direct sunlight, or high humidity.
• Terazinin maksimum kapasitesi olan 6000 gramın üzerinde aşırı yükleme yapmayın.
• Keep the balance clean and free from dust and chemical spills.
• Yalnızca cihazla birlikte verilen güç adaptörünü kullanın.
• Teraziyi kendiniz sökmeye veya onarmaya çalışmayın. Yetkili servis personeline başvurun.

3. Paket İçeriği

Paket açıldığında tüm eşyaların mevcut ve hasarsız olduğundan emin olun:

• KERN PCD 6K-4 Weighing Platform
• Dijital Gösterge Ünitesi
• Güç Adaptörü
• Wind Protection Ring (for models with Ø 105 mm weighing plate)
• Güvenlik Kapağı
• Kullanım Kılavuzu (bu belge)

Figure 1: KERN PCD 6K-4 Precision Laboratory Balance
This image shows the KERN PCD 6K-4 precision laboratory balance. It consists of a square weighing platform with a stainless steel surface, connected by a cable to a separate digital display unit. The display unit features a large digital readout, along with buttons for ON/OFF, MODE/CAL, SET/M, PRINT, and TARE. The display indicates a maximum capacity of 3500g and a readability of 0.01g, though the model is 6K-4 (6000g max). The separate design is ideal for use in specialized environments like glove-bags.

4. Kurulum

1. Atama: Place the weighing platform and display unit on a stable, vibration-free, and level surface. Ensure sufficient space for operation and avoid direct sunlight, drafts, or significant temperature fluctuations.
2. Toplantı: Connect the cable from the weighing platform to the designated port on the digital display unit.
3. Seviyelendirme: Use the adjustable foot bolts located on the underside of the weighing platform to level the balance. Observe the integrated spirit level (if present) to ensure precise horizontal alignment.
4. Rüzgar Koruması: If your model includes a wind protection ring (for Ø 105 mm weighing plates), carefully place it around the weighing platform. This helps stabilize readings in environments with air currents.
5. Güç Bağlantısı: Connect the power adapter to the display unit and then plug it into a suitable power outlet.

5. Kullanım Talimatları

5.1 Güç Açma/Kapatma

• To turn the balance ON, tuşuna basın AÇIK/KAPALI button. The display will show a self-test and then settle at 0.00g.
• To turn the balance KAPALI, tuşuna basın ve basılı tutun AÇIK/KAPALI ekran kapanana kadar düğmesine basın.

5.2 Temel Tartım

1. Ensure the balance is powered on and displays 0.00g.
2. Carefully place the item to be weighed onto the center of the weighing platform.
3. Wait for the display to stabilize. The stable weight will be shown.
4. Remove the item from the platform.

5.3 TARE Function

The TARE function allows you to subtract the weight of a container, so only the net weight of the contents is displayed.

1. Place the empty container onto the weighing platform. The display will show its weight.
2. Basın DARA Düğmeye basın. Ekran 0.00g'ye sıfırlanacaktır.
3. Tartılacak maddeyi kaba ekleyin. Ekranda maddenin net ağırlığı gösterilecektir.

The balance also features a PRE-TARE function for manual entry of a known container weight. Consult the full manual for detailed instructions on using PRE-TARE, typically accessed via the MOD/KAL or SET/M button in specific modes.

5.4 Unit Selection / Mode

Basın MOD/KAL button to cycle through available weighing units (e.g., grams, kilograms, pounds, ounces) or to enter different operating modes. Refer to the full manual for a list of supported units and mode functions.

5.5 Kalibrasyon

Regular calibration ensures the accuracy of your balance. Calibration should be performed using certified calibration weights.

1. Ensure the balance is stable and free from any load.
2. Basılı tutun MOD/KAL Ekranda "CAL" görünene kadar düğmeye basın.
3. Follow the on-screen prompts to place the required calibration weight(s) onto the platform.
4. Once calibration is complete, the balance will return to weighing mode.

Note: Specific calibration procedures may vary. Always consult the detailed instructions provided with your balance for precise steps and recommended calibration weights.

5.6 Print Function

If your balance is connected to a compatible printer or data interface, pressing the YAZDIR button will send the current weighing data to the connected device.

6. Bakım

• Temizlik: Temizlemeden önce elektriği kesin. Yumuşak bir bez kullanın.amp cloth with a mild detergent to clean the weighing platform and display unit. Avoid abrasive cleaners or solvents. Ensure no liquid enters the device.
• Depolamak: When not in use for extended periods, store the balance in a clean, dry, and stable environment. Use the provided safety cover to protect it from dust.
• Denetleme: Regularly inspect the power cable and connections for any signs of damage.

7. Sorun Giderme

8. Özellikler

• Modeli: KERN PCD 6K-4
• Marka: ÇEKİRDEK
• Maksimum Kapasite: 6000 gr (6 kg)
• Okunabilirlik: Typically 0.01 g (Note: Image shows 0.01g for a 3500g model, actual readability for 6000g model may vary slightly, but is generally in this precision range.)
• Görüntüleme Türü: Dijital
• Özellik: PRE-TARE function
• Önerilen Kullanımlar: Laboratory/scientific applications
• Ürün Ölçüleri: 11.02 x 6.5 x 2.95 inches (Weighing platform and display unit combined/approximate)
• Üretici: KERN & SOHN GmbH

9. Garanti ve Destek

For warranty information, technical support, or service inquiries, please contact your KERN dealer or visit the official KERN webLütfen siteyi ziyaret edin. Destek ekibiyle iletişime geçerken satın alma fişinizi ve ürün seri numaranızı hazır bulundurun.