Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce User Manual

1. Giriş

Satın aldığınız için teşekkür ederizasing the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce. This product is designed to provide efficient and adjustable lighting for various indoor environments. This manual provides essential information for safe installation, proper operation, and effective maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation or use, and retain them for future reference.

1.1 Güvenlik Bilgileri

• UYARI: Elektrik çarpması riski vardır. Kurulum veya bakım işlemlerinden önce sigorta kutusundan veya devre kesiciden elektriği kesin.
• Tüm elektrik bağlantıları yerel yönetmeliklere, yönetmeliklere veya Ulusal Elektrik Koduna (NEC) uygun olmalıdır. Elektrik tesisatı bağlantıları konusunda bilgi sahibi değilseniz, yetkili bir elektrikçiye danışın.
• This fixture is intended for indoor use only. Do not expose to water or moisture.
• Do not attempt to alter the fixture. Any modifications may void the warranty and create a safety hazard.
• Cihazı dikkatli kullanın. Düşürmekten veya şiddetli darbelere maruz bırakmaktan kaçının.

Şekil 1: Ön view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce in Gloss White finish.

2. Dahil Edilen Bileşenler

Carefully unpack your fixture and identify all parts. Ensure all components are present and undamaged before discarding packaging materials.

• 1 x LED Bullet Head Miter Arm Wall Sconce (18" Arm, Gloss White)
• 1 x Mounting Hardware Kit (includes mounting plate, screws, wire nuts)
• 1 x Kullanım Kılavuzu

Şekil 2: Açısal view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, highlighting the miter arm and bullet head.

3. Kurulum Talimatları

Önemli: Before starting installation, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. If you are unsure about electrical wiring, consult a qualified electrician.

1. Kurulum Alanını Hazırlayın: Duvar yüzeyinin temiz, kuru ve armatürü taşıyabilecek yapısal sağlamlıkta olduğundan emin olun.
2. Gücü Kapatın: Locate the circuit breaker or fuse box and turn off the power to the wall switch or outlet where the fixture will be installed. Verify power is off using a voltage test cihazı.
3. Montaj Plakasını Takın: Secure the mounting plate (included in hardware kit) to the junction box in the wall using the provided screws. Ensure the plate is firmly attached.
4. Elektrik Bağlantılarını Yapın:
   • Bağlan siyah Armatürden gelen kablo siyah (Faz) kabloyu bağlantı kutusundan bir kablo somunu kullanarak çıkarın.
   • Bağlan beyaz Armatürden gelen kablo beyaz (Nötr) kabloyu bağlantı kutusundan bir kablo somunu kullanarak çıkarın.
   • Bağlan zemin Armatürden gelen kablo (çıplak bakır veya yeşil) zemin wire from the junction box and to the mounting plate using a ground screw.

   Ensure all wire connections are secure and properly insulated with wire nuts.
5. Fikstürü Takın: Carefully tuck all wires into the junction box. Align the fixture's back plate with the mounting plate and secure it using the provided screws.
6. Gücü Geri Yükle: Armatür güvenli bir şekilde monte edildikten sonra, devre kesiciden elektriği tekrar açın. Aydınlatma armatürünü test edin.

4. Kullanım Talimatları

The Troy Lighting LBLEDWT3LBM018 LED Wall Sconce is designed for straightforward operation.

• Güç Açma/Kapatma: Operate the fixture using the standard wall switch connected to its circuit.
• Işığın Ayarlanması: The bullet head of the sconce is adjustable, allowing you to direct the light beam as needed. Gently pivot the bullet head to achieve the desired lighting angle.
• Uzaktan Kumanda (varsa): If your installation includes a compatible remote control system (as indicated by "Control Method: Remote" in specifications), refer to the remote control's specific instructions for pairing and operation.

5. Bakım ve Özen

Proper care will ensure the longevity and appearance of your Troy Lighting fixture.

• Temizlik: Temizlemeden önce gücü kapatın. Yumuşak, kuru veya hafif nemli bir bez kullanın.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• LED Işık Kaynağı: The LED light source in this fixture is non-removable and designed for long-term use. Do not attempt to replace the LED bulb.
• Denetleme: Periodically check for any loose connections or signs of wear. If any issues are observed, disconnect power and consult a qualified electrician.

6. Sorun Giderme

Aydınlatma armatürünüzle ilgili sorun yaşıyorsanız, aşağıdaki yaygın sorunlar ve çözümlere göz atın:

If these steps do not resolve the issue, please contact customer support or a qualified electrician.

7. Ürün Özellikleri

8. Garanti Bilgileri

This Troy Lighting product is covered by a 1 yıllık sınırlı garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. For warranty claims, please retain your proof of purchase and contact customer support.

9. Müşteri Desteği

If you have any questions, require assistance with installation, or need to report a problem with your Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, please contact Troy Lighting customer service or your retailer. Please have your model number (LBLEDWT3LBM018) and proof of purchase ready when contacting support.

For more information about Troy Lighting products, you may visit the official Troy Lighting websiteleri veya Amazon'daki mağazaları: Troy Lighting Amazon Store.