giriiş
This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.
Ürünün en iyi performansı ve uzun ömürlülüğü için lütfen kullanmadan önce bu talimatları dikkatlice okuyunuz.
Ürün Özellikleri
- Bağlantı Tipi: 2.4G receiver antenna with IPEX 4 Generation connector.
- Uzunluk: 5.9 inches (150mm) total length.
- Malzeme: RF113 Silver plated Wire Material for enhanced signal transmission.
- Performans: Precision machining ensures low loss signal stability and high sensitivity.
- Uyumluluk: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.
Paket İçeriği
The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.
Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.
Kurulum ve Yükleme
- Bağlayıcı Tipini Belirleyin: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
- Alıcıya bağlanın: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
- Anten Yerleşimi: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
- Güvenli Anten: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.
Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.
Kullanım Talimatları
Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.
Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.
Bakım
- Düzenli Muayene: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
- Temizlik: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
- Depolamak: When not in use, store the antennas in a dry, cool place, protected from physical damage.
- Yenisiyle değiştirme: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.
Sorun giderme
- Problem: Poor Signal / Frequent Failsafes
-
- Bağlantıyı kontrol et: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
- Anten Yerleşimi: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
- Anten Hasarı: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
- Receiver Issues: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
- Problem: Antenna Does Not Fit
-
- Verify Connector Type: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.
Özellikler
| Parametre | Değer |
|---|---|
| Model Numarası | 43234-1976 |
| Anten Tipi | 2.4G Receiver Antenna |
| Bağlayıcı Türü | IPEX 4 Generation |
| Uzunluk | 150 mm (5.9 inç) |
| Tel Malzemesi | RF113 Silver plated |
| Empedans | 50 Ohm |
| Frekans Aralığı | 2400 - 2500 MHz |
| SWR | <= 2.0 |
| Kazanmak | 2 |
| Çalışma Sıcaklığı | -40 °C ila +65 °C |
| Depolama Sıcaklığı | -40 °C ila +80 °C |
| Item Weight (per antenna) | Approximately 0.5g (as shown in product images) |
Image: The 150mm length of the antenna measured against a ruler.
Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.
Resmi Ürün Videosu
Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)
Garanti ve Destek
For warranty information and technical support, please refer to the official iFlight webSite üzerinden veya doğrudan müşteri hizmetleriyle iletişime geçin. Belirli garanti koşulları bölgeye ve perakendeciye göre değişiklik gösterebilir.