giriiş
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your V-TAC VT-5087 PIR Infrared Motion Sensor. Please read this manual carefully before installation and retain it for future reference. This sensor is designed for ceiling mounting and automatically controls lighting based on detected motion.
Temel Özellikler
- PIR (Passive Infrared) Motion Detection
- 360-degree Detection Angle
- Ceiling Mount Design
- Adjustable LUX (Ambient Light) Sensitivity
- Adjustable TIME Delay
- Maximum Load: 1000W (LED) / 2000W (Traditional Lighting)
Şekil 1: V-TAC VT-5087 PIR Infrared Motion Sensor. This image highlights the sensor's capabilities, including a maximum load of 1000W for LED lighting, automatic on/off based on motion, and a 'SUN' setting for daylight operation (only works when natural light is 3 lux or less). Detection motion speed is 0.6-1.5m/s.
Kurulum ve Yükleme
Önemli Güvenlik Bilgileri: Installation must be performed by a qualified electrician and in accordance with all local electrical codes. Ensure power is disconnected at the circuit breaker before beginning installation to prevent electric shock.
Montaj Yeri
- Choose a ceiling location where the sensor can cover the desired detection area without obstruction.
- Avoid mounting near heat sources (e.g., air vents, heaters) or direct sunlight, as these can cause false triggers.
- Ensure the mounting surface is stable and can support the sensor.
Kablolama Talimatları
- Ana güç kaynağını devre kesiciden kapatın.
- Dıştaki c'yi dikkatlice çıkarınasing of the sensor to access the wiring terminals.
- Connect the live (L), neutral (N), and load (L') wires according to the diagram provided on the sensor or in the packaging. Typically:
- L: Live input from power supply
- N: Neutral input from power supply and neutral to load
- L': Switched live output to the light fixture (load)
- Securely fasten the sensor to the ceiling using the provided screws and anchors.
- Dıştaki c'yi değiştirinasing.
- Restore power and test the sensor.
Şekil 2: Arka view of the sensor, illustrating the wiring terminals (L, N, L') and the LUX and TIME adjustment knobs. Mounting screws and wall anchors are also shown.
Kullanım Talimatları
The V-TAC VT-5087 sensor features two adjustable controls: LUX and TIME. These allow you to customize the sensor's behavior to suit your environment and preferences.
Ayar Düğmeleri
- LUX Control: This knob adjusts the ambient light threshold at which the sensor will activate.
- Yönel GÜNEŞ symbol for activation in both daylight and darkness (e.g., >2000 LUX).
- Yönel AY symbol for activation only in low light conditions (e.g., <3 LUX).
- TIME Control: This knob sets the duration the light remains on after motion is detected and then stops.
- Adjust from minimum (approx. 10 seconds) to maximum (approx. 15 minutes).
- The timer resets if motion is detected again before the set time expires.
Şekil 3: Ayrıntılı view of the easy-access control knobs for LUX adjustment and TIME adjustment. This image also indicates the rated load for LED lighting (up to 1000W) and traditional lighting (up to 2000W).
Detection Range and Angle
The sensor offers a 360-degree detection angle, making it suitable for central ceiling placement. The maximum detection distance is approximately 6 meters (up to 8 meters at <24°C). The detection motion speed is 0.6-1.5 m/s.
Şekil 4: Diagram showing the impressive detection features, including a 360-degree detection range, adjustable light intensity range (<3 to 2000 LUX), and a detection distance of 8 meters (up to 24°C). The time delay is adjustable from 10 seconds to 15 minutes.
Bakım
The V-TAC VT-5087 PIR sensor requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Temizlik: Gently wipe the sensor lens and housing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
- obstrüksiyonlar: Periodically check that there are no new obstructions (e.g., furniture, decorations) blocking the sensor's field of view.
- Güç: Always disconnect power before performing any cleaning or inspection to prevent electric shock.
Sorun giderme
If you experience issues with your V-TAC VT-5087 PIR sensor, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Hareket algılandığında ışık yanmıyor. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Algılama aralığı çok kısa veya tutarsız. |
|
|
Teknik Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | VT-5087 |
| Marka | V-TAC |
| Renk | Siyah |
| Güç Kaynağı | Kablolu Elektrik |
| Sıklık | 60 Hz |
| Montaj Tipi | Tavan Montajı |
| Maksimum Algılama Aralığı | 6 Meters (up to 8 meters at <24°C) |
| Algılama Açısı | 360 Derece |
| Zaman Gecikmesi Ayarı | Min. 10s ± 3s / Max. 15min ± 2min |
| Light Intensity Range (LUX) | <3 ila 2000 LÜKS (Ayarlanabilir) |
| Algılama Hareket Hızı | 0.6-1.5 m/sn |
| Rated Load (LED) | Maksimum 1000W |
| Rated Load (Traditional Lighting) | Maksimum 2000W |
| Çalışma Sıcaklığı | 15 Degrees Celsius (Note: This seems like a minimum or specific test temperature, not a range.) |
| IP Derecelendirmesi | IP20 |
Garanti Bilgileri
This V-TAC VT-5087 PIR Infrared Motion Sensor comes with a 2 yıllık garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
Şekil 5: Product packaging for the V-TAC Infrared Motion Sensor, clearly indicating a 2-year warranty and other features like 360-degree detection, 6m distance, and IP20 rating.
Müşteri Desteği
For further assistance, technical support, or warranty inquiries, please contact V-TAC customer service. Refer to the V-TAC official webEn güncel iletişim bilgileri için lütfen sitenizi veya ürün ambalajınızı ziyaret edin.
V-TAC Webalan: www.v-tac.eu