BONTEC Single Arm Monitor Mount

BONTEC Single Arm Monitor Mount

Kullanıcı Kılavuzu

1. Giriş

Thank you for choosing the BONTEC Single Arm Monitor Mount. This product is designed to enhance your workspace by providing a stable, adjustable, and ergonomic solution for your monitor. It helps free up valuable desk space and allows for flexible screen positioning to reduce neck and back strain.

2. Güvenlik Bilgileri

  • Montaj ve kullanım öncesinde tüm talimatları dikkatlice okuyunuz.
  • Ensure your monitor's weight and VESA pattern are within the specified limits (max 10 kg, VESA 75x75mm or 100x100mm).
  • Vidaları aşırı sıkmayın, bu hasara neden olabilir.
  • Küçük parçaları çocuklardan uzak tutun.
  • Herhangi bir parça eksik veya hasarlıysa derhal müşteri desteğiyle iletişime geçin.

3. Paket İçeriği

Montaj işlemine başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

  • Monitör Kolu Tertibatı
  • Masa Clamp Bileşen
  • Grommet Base Component
  • Montaj Donanımı (vidalar, rondelalar, ara parçalar)
  • Allen Keys (Hex Wrenches)
  • Kablo Yönetim Klipsleri
  • Kullanım Kılavuzu

4. Kurulum ve Kurulum

The BONTEC monitor mount offers two primary installation methods: Desk Clamp and Grommet Base. Choose the method that best suits your desk setup.

4.1. Masa Clamp Kurulum

This method is suitable for desk thicknesses between 10mm and 85mm.

  1. C-cl'yi takınamp to the edge of your desk. Ensure the clamp is securely tightened to provide maximum stability.
  2. Ana direği cl'ye yerleştirin.amp base and secure it with the provided screw.
  3. Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.

4.2. Kablo Demeti Tabanı Montajı

This method is suitable for desks with a pre-existing bolt hole (diameter 10mm to 85mm) and desk thicknesses between 10mm and 80mm.

  1. C-cl'yi sökünamp to use the grommet base components.
  2. Insert the grommet bolt through the desk hole.
  3. Secure the grommet base from underneath the desk using the provided washer and nut.
  4. Ana direği halkalı tabana yerleştirin ve sabitleyin.
  5. Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.
Two installation methods: Desk Clamp and Grommet Base
Figure 1: Illustration of the two available installation methods: Desk Clamp and Grommet Base. The Desk Clamp supports desk thicknesses from 10mm to 85mm. The Grommet Base supports desk thicknesses from 10mm to 80mm with a hole diameter from 10mm to 85mm.

4.3. Monitörün Takılması

This mount is compatible with monitors between 13 and 32 inches, with VESA mounting patterns of 75x75mm or 100x100mm, and weighing up to 10 kg.

  1. Carefully align your monitor's VESA holes with the mounting plate on the arm.
  2. Secure the monitor to the plate using the appropriate screws provided. Ensure they are tightened firmly but do not overtighten.
Monitor mounted on the BONTEC arm, showing screen size compatibility and weight capacity
Figure 2: A monitor securely mounted on the BONTEC arm, demonstrating compatibility with screens from 13 to 32 inches and a maximum capacity of 10 kg. The image also highlights VESA compatibility for 75x75mm and 100x100mm patterns.

5. Kullanım Talimatları ve Ayarlamalar

The BONTEC monitor mount offers a range of adjustments for optimal viewkonfor.

5.1. Yükseklik Ayarı

To adjust the monitor's height, loosen the screw on the pole collar, slide the arm to the desired position, and then re-tighten the screw firmly.

Adjustable height feature of the monitor arm, showing a range of 430mm
Figure 3: The monitor arm's adjustable height feature, illustrating the vertical movement range of up to 430mm along the main pole.

5.2. Eğim Ayarı

The monitor can be tilted up or down to reduce glare and optimize viewing angles. Loosen the tilt screw on the VESA plate, adjust the angle, and then re-tighten.

Full motion adjustment showing tilt and rotation capabilities
Figure 4: Demonstrates the full motion adjustment capabilities, including a tilt range of ±90° and 360° rotation for portrait or landscape orientation.

5.3. Döndürme ve Çevirme

The arm allows for 180-degree swivel at multiple joints, and the VESA plate can rotate 360 degrees, enabling easy switching between landscape and portrait orientations.

Angle adjustment illustration showing 180 degree swivel at arm joints
Figure 5: An illustration detailing the angle adjustment, showing the arm's ability to swivel 180° at its joints for flexible positioning.

5.4. Kablo Yönetimi

Utilize the integrated cable management clips along the arm to route and organize your power and AV cables, keeping your workspace neat and clutter-free.

Multiple features including integrated cable management and Allen key storage
Figure 6: Highlights multiple features of the monitor arm, including the integrated cable management system to keep wires organized and a convenient storage slot for the included Allen keys on the main pole.

6. Bakım

  • Tüm vidaların ve bağlantıların sıkı ve güvenli kaldığından emin olmak için düzenli olarak kontrol edin.
  • Montaj parçasını yumuşak bir bezle temizleyin.amp Bez. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
  • Do not lubricate any parts of the mount unless specifically instructed.

7. Sorun Giderme

SorunOlası NedenÇözüm
Monitor is wobbly or unstable.Mounting screws are loose; desk clamp/grommet base is not tight enough; monitor weight exceeds limit.Ensure all screws are tightened. Re-tighten the desk clamp or grommet base. Verify monitor weight is within 10 kg.
Kol hareketini ayarlamakta zorluk.Eklem yerleri çok sıkı.Use the provided Allen keys to slightly loosen the screws at the arm joints until desired movement is achieved.
VESA plate does not align with monitor holes.Incorrect VESA pattern; plate installed backward.Verify your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the VESA plate is oriented correctly as per instructions.

8. Özellikler

  • Marka: BONTEK
  • Renk: Siyah
  • Uyumlu Cihazlar: Monitors (LCD, LED)
  • Ekran Boyutu Uyumluluğu: 13-32 inches (33-81cm diagonal)
  • VESA Uyumluluğu: 75x75mm, 100x100mm
  • Montaj Tipi: Desk Mount (Clamp veya Halka)
  • Özellik: Adjustable (Height, Tilt, Swivel, Rotation)
  • Malzeme: Alaşımlı Çelik
  • Öğe Boyutları (U x G x Y): 39 x 7.5 x 43 santimetre
  • Ağırlık sınırı: 10 Kilogram
  • Suya Dayanıklılık Seviyesi: Suya dayanıklı değil

9. Garanti ve Destek

BONTEC is committed to providing high-quality products and excellent customer service. This product is backed by technical support to assist you with any questions or concerns you may have during assembly or use.

For technical assistance or warranty inquiries, please refer to the contact information provided with your purchase or visit the official BONTEC webalan.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.