Hillyard Top Clean® - 1 Gallon All-Purpose Cleaner User Manual

giriiş

Hillyard Top Clean is a fast-acting, synthetic cleaner designed to effectively remove soil while preserving the shine of metal cross-linked finishes. Its neutral pH formula ensures it attacks dirt without harming your floor or its finish. This concentrated formula offers economical cost-in-use and includes defoaming agents to minimize foam build-up during cleaning.

Image of the Hillyard Top Clean 1 Gallon container, showing the product label.

Güvenlik Bilgileri

Always read and follow all instructions and safety precautions on the product label before use. Keep out of reach of children and pets. Avoid contact with eyes and prolonged contact with skin. In case of contact, rinse thoroughly with water.

Önemli Not: In Federally inspected meat and poultry plants, follow all usage with a thorough potable water rinse.

Kurmak

• Çalışma alanının iyi havalandırıldığından emin olun.
• Wear appropriate personal protective equipment (PPE), such as gloves and eye protection, to prevent skin and eye irritation.
• Always use cold tap water for dilution unless otherwise specified.
• Prepare your cleaning equipment (mop, bucket, scrubber, spray bottle, clean cloths) before starting.

Kullanım Talimatları

Hillyard Top Clean is a concentrated formula. Dilute according to the specific application below:

Zeminler

• For Daily Damp Paspaslama: Use 1 ounce to 2 ounces of Top Clean per gallon of water.
• For Machine Scrubbing: Use 1 ounce to 3 ounces per gallon of water.
• For Automatic Scrubber: Use 1 ounce to 2 ounces of Top Clean per gallon of water (adjust based on the amount of surface soil). Use a light scrub pad only.
• Remove the soiled cleaning solution. Rinsing is not necessary after normal cleaning.
• When preparing a surface to receive paint, finish, etc.: Rinse with clean water after scrubbing.

Duvarlar

• Dilute 4 ounces of cleaner per gallon of water.
• Apply the solution with a sponge or cloth, starting at the bottom of the wall and working towards the top to prevent streaking.

Bardak

• Dilute 2 ounces to 4 ounces of cleaner per gallon of water.
• Spray the surface evenly.
• Wipe dry with a clean, lint-free cloth for a streak-free finish.

Bus, Auto, and Truck Bodies

• Dilute 1 ounce to 2 ounces of cleaner per gallon of water.
• Apply the solution and rinse thoroughly.

Bakım

• Store the product in its original container, tightly closed, in a cool, dry place.
• Doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak tutun.
• Do not mix with other cleaning products unless specifically instructed.

Sorun giderme

• If cleaning results are unsatisfactory: Verify that the correct dilution ratio has been used. Ensure the surface was properly prepared (e.g., swept or vacuumed before mopping).
• İnatçı lekeler için: A slightly higher concentration within the recommended limits may be used, followed by a thorough rinse with clean water.
• Excessive foaming: While Top Clean contains defoaming agents, ensure proper dilution and application methods are followed.

Özellikler

Bertaraf Bilgileri

Buyer assumes all risk and liability associated with disposal of this product (original concentration or dilution) in violation of applicable law. Waste from normal use may be sewered to a public-owned treatment works in compliance with applicable federal, state, and local requirements. Consult local authorities for specific disposal guidelines in your area.

Garanti ve Destek

Specific warranty information for Hillyard Top Clean is not provided in this manual. For details regarding product warranty, please refer to the product packaging or contact Hillyard directly.

For product support, technical assistance, or further inquiries, please contact Hillyard customer service through their official website or the contact information provided on the product label.