Showtec Compact Par 7 Q4 7 x 3W RGBW LED Zemin PAR Spot Kullanım Kılavuzu

1. Giriş

This user manual provides comprehensive instructions for the safe and efficient operation of the Showtec Compact Par 7 Q4 7 x 3W RGBW LED Floor PAR Spot. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent damage to the unit or injury to personnel.

The Showtec Compact Par 7 Q4 is a compact RGBW PAR can designed for various lighting applications, offering versatile color mixing and robust performance.

2. Güvenlik Talimatları

Elektrik çarpması, yangın veya yaralanma riskini azaltmak için her zaman aşağıdaki güvenlik önlemlerine uyun:

• Güç kaynağı hacmini sağlayıntage, vol ile eşleşirtagÜnite üzerinde belirtilmiştir.
• Üniteyi her zaman topraklı bir elektrik prizine bağlayın.
• Güç kablosu hasarlıysa cihazı çalıştırmayın.
• Temizleme veya bakım işlemlerine başlamadan önce elektrik bağlantısını kesin.
• Üniteyi yağmura veya neme maruz bırakmayın.
• Cihazın aşırı ısınmasını önlemek için çevresinde yeterli havalandırma sağlayın.
• Işık kaynağına doğrudan göz temasından kaçının.
• Bu ünite yalnızca iç mekanda kullanıma uygundur.

3. Ürün Bittiview

The Showtec Compact Par 7 Q4 features seven 3W RGBW LEDs, providing a wide spectrum of colors. Its compact design makes it suitable for floor standing or truss mounting.

Şekil 3.1: Ön view of the Showtec Compact Par 7 Q4 with red light output, showcasing its seven powerful RGBW LEDs.

Figure 3.2: The PAR spot emitting a bright white light, demonstrating its full spectrum capabilities.

Figure 3.3: The PAR spot displaying a vibrant blue light, highlighting its color mixing versatility.

Şekil 3.4: Yakın çekim view of the LED array when the unit is off, showing the individual lenses.

Şekil 3.5: Arka view of the unit, showing the power input and DMX connections (XLR 3-pin).

Şekil 3.6: Açısal view of the PAR spot, demonstrating the adjustable mounting bracket for floor or truss applications.

4. Kurulum

4.1 Paketin açılması

Carefully unpack the unit and check for any damage during transit. Retain the packaging material for future transport or storage.

4.2 Montaj

The Compact Par 7 Q4 can be used as a floor spot or mounted to a truss using the integrated bracket. Ensure the mounting surface or truss can support the weight of the fixture. Use appropriate clamps and safety cables when mounting overhead.

4.3 Güç Bağlantısı

Connect the power cable to the unit's power input and then to a grounded electrical outlet. Verify that the local voltage, ünitenin gereksinimlerini karşılar (240 Volt).

4.4 DMX Bağlantısı (İsteğe Bağlı)

For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the fixture. If connecting multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the next.

5. Çalıştırma

5.1 Kontrol Paneli

The unit features a digital display and control buttons (Menu, Up, Down, Enter) on the rear for setting modes and DMX addresses.

5.2 Çalışma Modları

The Showtec Compact Par 7 Q4 typically offers several operating modes:

• DMX Modu: Allows control via an external DMX controller. Set the DMX address using the control panel.
• Otomatik mod: Otomatik olarak çalışan önceden programlanmış ışık gösterileri.
• Ses Aktif Modu: The light reacts to sound via a built-in microphone.
• Master/Slave Modu: Link multiple units where one acts as the master and others as slaves, synchronizing their operation.
• Statik Renk Modu: Tek bir statik renk seçin ve görüntüleyin.

5.3 DMX Kanal Tablosu

Refer to the specific DMX channel chart in the full product manual for detailed information on controlling each function via DMX. Common channels include Dimmer, Red, Green, Blue, White, Strobe, and Program selection.

6. Bakım

6.1 Temizlik

Regular cleaning of the lenses and housing is recommended to maintain optimal light output and extend the unit's lifespan. Use a soft, lint-free cloth and a mild glass cleaner. Do not use abrasive materials.

6.2 Sigorta Değişimi

If the unit does not power on, check the fuse located near the power input. Replace it with a fuse of the same type and rating only.

6.3 Depolama

When not in use, store the unit in its original packaging or a suitable flight case in a dry, dust-free environment.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

Information regarding specific warranty terms and conditions for the Showtec Compact Par 7 Q4 is not available in the provided product details. Please refer to the retailer or manufacturer's official webEn güncel garanti bilgileri için site.

For technical support, service, or spare parts inquiries, please contact your authorized Showtec dealer or the manufacturer directly. Always provide the model number (Q4) and reference number (LIG0013729-000) when seeking support.