Southwire AMMW1

Woods AMMW1 Analog Multimeter Instruction Manual

Model: AMMW1 | Brand: Southwire

1. Giriş

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of the Woods AMMW1 Analog Multimeter. Please read this manual thoroughly before using the device and retain it for future reference.

The Woods AMMW1 is a versatile analog multimeter designed for basic electrical measurements, offering 5 functions with up to 16 measuring ranges. It is rated CAT II 500V UL.

2. Güvenlik Bilgileri

WARNING: To avoid electric shock or personal injury, always follow basic safety precautions when using this instrument.

  • Test uçlarının her zaman iyi durumda ve doğru şekilde bağlı olduğundan emin olun.
  • Hacmi ölçmeye çalışmayıntages or currents exceeding the maximum rated values for each range.
  • Always turn off power to the circuit under test before connecting or disconnecting test leads.
  • Vol ile çalışırken dikkatli oluntag30V AC RMS, 42V tepe veya 60V DC'nin üzerindeki voltajlardan kaçının, çünkü bunlar elektrik çarpması tehlikesi oluşturur.
  • Replace the battery and fuse only with the specified types.
  • Multimetre hasarlı görünüyorsa veya kasası açıksa çalıştırmayın.

3. Ürün Bittiview

The Woods AMMW1 Analog Multimeter features a clear analog display and a rotary selector for various measurement functions.

Woods AMMW1 Analog Multimeter front view

Figure 1: Woods AMMW1 Analog Multimeter. This image displays the front of the multimeter, showing the analog display with various scales (OHMS, AC DC, AC10V BATT), the Woods logo, the model number AMMW1, the rotary function selector switch, and the input jacks for VΩmA and COM. An 'ADJUST Ω' knob is visible on the right side, and 'FUSE & DIODE PROTECTION' is indicated below the display.

3.1 Temel Bileşen

  1. Analog Ekran: Shows measurement readings using a needle against various scales.
  2. Rotary Function Selector: Used to select the desired measurement function and range (e.g., ACV, DCV, Resistance, Current, Battery Test).
  3. VΩmA Giriş Jakı: Positive (+) input for voltage, resistance, and current measurements.
  4. COM Giriş Jakı: Common/Negative (-) input for all measurements.
  5. OHMS Adjustment Knob: Used to zero the meter for resistance measurements.
  6. Battery Test Sockets: Dedicated sockets for testing 1.5V and 9V batteries.

4. Kurulum

4.1 Pil Kurulumu

The Woods AMMW1 requires 1 AA battery (included) for operation. To install or replace the battery:

  1. Ensure the multimeter is turned off (selector switch to OFF position, if available, or a non-measurement range).
  2. Ünitenin arkasındaki pil bölmesi kapağını bulun.
  3. Remove the screw(s) securing the cover and carefully open it.
  4. Insert the AA battery, observing the correct polarity (+ and - markings).
  5. Replace the cover and secure it with the screw(s).

4.2 Test Uçlarının Bağlanması

  • Siyah test kablosunu Bİlgİ (Ortak) jak.
  • Kırmızı test ucunu, VΩmA çoğu ölçüm için jak (voltaj)tage, resistance, current).

5. Kullanım Talimatları

Before taking any measurement, ensure the test leads are correctly connected and the rotary selector is set to the appropriate function and range.

5.1 DC Vol Ölçümütage (V-)

  1. Set the rotary selector to the desired DC Voltage (V-) range (e.g., 2.5V, 10V, 50V, 250V, 500V). Choose a range higher than the expected voltage.
  2. Kırmızı test ucunu devrenin pozitif (+) tarafına, siyah test ucunu ise negatif (-) tarafına bağlayın.
  3. Cildi okutage value from the appropriate DCV scale on the analog display.

5.2 AC Vol Ölçümütage(V~)

  1. Set the rotary selector to the desired AC Voltage (V~) range (e.g., 10V, 50V, 250V, 500V). Choose a range higher than the expected voltage.
  2. Test uçlarını AC voltaj regülatörüne bağlayın.tage kaynak.
  3. Cildi okutage value from the appropriate ACV scale on the analog display.

5.3 Direncin Ölçülmesi (Ω)

  1. Set the rotary selector to the desired Resistance (Ω) range (e.g., 10x Ω, 1000x Ω).
  2. Kırmızı ve siyah test uçlarını birbirine kısa devre yapın.
  3. Ayarla OHMS ADJUST knob until the needle points exactly to '0' on the OHMS scale. This zeros the meter.
  4. Connect the test leads across the component whose resistance you wish to measure. Ensure the component is de-energized.
  5. Read the value from the OHMS scale and multiply it by the range multiplier (e.g., x10, x1000).

5.4 Measuring DC Current (mA, µA)

  1. UYARI: Multimetreyi asla bir voltmetre ile paralel bağlamayın.tage source when measuring current. Always connect it in series with the circuit.
  2. Set the rotary selector to the desired DC Current (mA or µA) range (e.g., 500 µA, 10 mA, 250 mA).
  3. Akımı ölçmek istediğiniz noktadan devreyi kesin.
  4. Connect the multimeter in series with the circuit, ensuring the red lead is towards the higher potential and the black lead towards the lower potential.
  5. Geçerli değeri uygun ölçekten okuyun.

5.5 Battery Testing (1.5V, 9V)

  1. Set the rotary selector to the 1.5V BATT or 9V BATT konum.
  2. Insert the battery to be tested into the corresponding battery test sockets, observing polarity.
  3. Read the battery condition from the dedicated "BAD / GOOD" scale on the analog display.

6. Bakım

6.1 Temizlik

Davayı reklamla silinamp Bez ve hafif deterjan kullanın. Aşındırıcı veya çözücü maddeler kullanmayın. Test uçlarını temiz ve kalıntılardan arındırılmış halde tutun.

6.2 Sigorta Değişimi

The multimeter is equipped with fuse and diode protection. If the current measurement function stops working, the fuse may need replacement.

  1. Multimetrenin kapalı olduğundan ve test uçlarının çıkarılmış olduğundan emin olun.
  2. Open the back cover of the multimeter (refer to battery installation).
  3. Eski sigortayı dikkatlice çıkarın.
  4. Replace with a fuse of the exact same type and rating (consult the device's internal markings or specifications for fuse type).
  5. Arka kapağı güvenli bir şekilde kapatın.

7. Sorun Giderme

SorunOlası NedenÇözüm
No reading / Needle doesn't moveDead battery; Incorrect range selected; Open circuit; Faulty test leads.Check/replace battery; Select appropriate range; Verify circuit continuity; Check test leads for damage.
Yanlış okumalarIncorrect range; Poor contact; OHMS not zeroed (for resistance).Select a more appropriate range; Ensure good contact with test points; Zero OHMS before resistance measurement.
Mevcut ölçüm çalışmıyorSigorta atmış.Sigortayı değiştirin (Bakım bölümüne bakın).

8. Özellikler

  • Modeli: AMMW1
  • Marka: Southwire (Orman)
  • Ölçüm Türü: Analog Multimetre
  • Fonksiyonlar: 5 (DC Voltage, AC Hacmitage, DC Current, Resistance, Battery Test)
  • Ölçüm Aralıkları: 16'e kadar
  • Maksimum Çalışma Hacmitage: KAT II 500V
  • Pil: 1 adet AA pil (dahil)
  • Pil Testi: 1.5V, 9V
  • Ürün Ölçüleri: 21.79x12.9x5.59 cm
  • Ürün Ağırlığı: 136 gr
  • Uyumluluk: UL
  • UPC: 032886958403

9. Garanti ve Destek

For warranty information or technical support, please contact Southwire customer service. Retain your proof of purchase for warranty claims.

Note: Specific warranty terms and contact details may vary by region. Please refer to the packaging or manufacturer's weben güncel bilgiler için site.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.