Amazon Basics GF-50201M Tekerlekli Çalışma Masası Sandalyesi Kullanım Kılavuzu

giriiş

This manual provides detailed instructions for the assembly, operation, and maintenance of your Amazon Basics GF-50201M Rolling Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Güvenlik Bilgileri

Önemli: Adhere to all safety guidelines to prevent injury or damage.

• Maksimum 275 pound (124.74 kg) ağırlık kapasitesini aşmayın.
• Ensure proper assembly of all components before use.
• Use the chair on a hard, level floor surface for optimal stability and mobility.
• Regularly inspect all parts for wear or damage. Discontinue use if any damage is found.
• Montaj sırasında küçük parçaları çocuklardan uzak tutun.

Paket İçeriği

Montaj işlemine başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Sırt Yastığı
• Koltuk Minderi
• Oturma Plakası
• Gazlı Asansör
• Temel
• Tekerlekler (5 adet)
• Montaj Donanımı (vidalar, rondelalar, Allen anahtarı)

Kurulum ve Montaj

Follow these steps for quick and easy assembly. An Allen wrench is included for all necessary fastenings.

Adım 1: Tekerlekleri tabana takın

Insert each of the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.

Image: The five-star base with casters inserted.

Adım 2: Gazlı Amortisörü Tabana Takın

Place the gas lift cylinder into the center hole of the assembled chair base. Ensure it sits securely.

Step 3: Attach Seat Plate to Seat Cushion

Align the seat plate with the pre-drilled holes on the underside of the seat cushion. Use the provided screws and Allen wrench to securely fasten the plate. Ensure the adjustment lever faces the front of the seat.

Image: Close-up of the seat adjustment lever mechanism.

Step 4: Attach Back Cushion to Seat Assembly

Connect the back cushion support to the seat plate using the remaining screws and Allen wrench. Tighten all screws firmly but do not overtighten.

Resim: Arka view of the chair showing the mesh back and connection points.

Step 5: Place Assembled Seat onto Gas Lift

Carefully place the assembled seat (with the seat plate attached) onto the top of the gas lift cylinder. The seat will settle into place once weight is applied.

Montaj Videosu

Video: Official Amazon Basics assembly guide for the Low-Back Computer Chair. This video demonstrates the step-by-step process of putting the chair together, from attaching the casters to securing the seat and backrest.

Kullanım Talimatları

Koltuk Yükseklik Ayarı

To adjust the seat height, locate the lever on the right side beneath the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, lift your weight off the seat and pull the lever upwards. Release the lever at your desired height.

Image: A hand demonstrating the use of the pneumatic seat height adjustment lever.

Döndürme ve Hareketlilik

The chair features a 360-degree swivel function, allowing for easy rotation. The smooth-rolling casters provide effortless movement across hard floor surfaces.

Image: A person comfortably seated in the Amazon Basics desk chair, illustrating its use in an office setting.

Bakım

To maintain the appearance and functionality of your chair:

• Temizlik: Reklamla temizleyinamp Bez. Sert kimyasallardan veya aşındırıcı temizleyicilerden kaçının.
• Denetleme: Tüm vidaların ve bağlantıların sıkı kaldığından emin olmak için periyodik olarak kontrol edin. Gerektiğinde yeniden sıkın.
• Tekerlekler: Tekerleklerin düzgün dönmesini sağlamak için tekerleklerin üzerinde biriken kalıntıları temizleyin.

Sorun giderme

Özellikler

Image: Diagram illustrating the dimensions of the Amazon Basics Rolling Desk Chair.

Garanti ve Destek

For warranty information or customer support, please refer to the Amazon Basics official website or contact Amazon customer service directly. Keep your purchase receipt for any warranty claims.