Pro'sKit MT-4616 Temperature/Humidity/Dew Point Meter Instruction Manual

1. Ürün Bittiview

The Pro'sKit MT-4616 is a portable, high-precision meter designed to measure ambient temperature, relative humidity, wet bulb temperature, and dew point temperature. It features data memory for up to 99 readings, unit selection between °F and °C, and additional functions such as Max/Min value display, low battery indication, auto power off, and backlight.

This manual provides detailed instructions for the safe and effective use of your MT-4616 meter.

Figure 1: Pro'sKit MT-4616 Temperature/Humidity/Dew Point Meter. The device is yellow and black, featuring a digital display showing temperature, humidity, dew point, and wet bulb readings. Below the display are various control buttons including power, hold, min/max, memory, and unit selection.

2. Güvenlik Bilgileri

Please read and understand all safety information before operating this meter. Failure to follow these instructions may result in injury or damage to the device.

• Do not operate the meter in environments with explosive gas, vapor, or dust.
• Avoid exposing the meter to extreme temperatures, direct sunlight, or high humidity for extended periods.
• Sayaç üzerinde herhangi bir açma veya değişiklik yapmaya çalışmayın. Tüm servis işlemlerini yetkili personele yaptırın.
• Remove batteries if the meter will not be used for a long period to prevent leakage.
• Ölçüm cihazını güçlü elektromanyetik alanlardan uzak tutun.

3. Bileşenler ve Ekran

Familiarize yourself with the meter's components and display indicators:

• Sensör Kafası: Located at the top, for temperature and humidity detection.
• LCD Ekran: Shows readings, units, and various indicators (HOLD, MAX/MIN/AVG, MEM, Low Battery).
• Güç Düğmesi (①): Turns the meter ON/OFF.
• HOLD Button (H): Ekrandaki mevcut okumayı dondurur.
• MIN/MAX Düğmesi: Toggles between minimum, maximum, and average readings.
• DP/WB Button: Switches between Dew Point and Wet Bulb temperature display.
• MEM Düğmesi: Stores the current reading into memory.
• OKU Butonu: Recalls stored data from memory.
• °C/°F Düğmesi: Selects temperature unit between Celsius and Fahrenheit.
• Backlight Button (☀): Ekran arka ışığını etkinleştirir/devre dışı bırakır.

4. Kurulum

4.1 Pil Kurulumu

1. Ölçüm cihazının arkasındaki pil bölmesi kapağını bulun.
2. Open the cover by sliding or unscrewing it (refer to the diagram if available).
3. Insert the required batteries (e.g., 9V battery) according to the polarity indicators (+/-).
4. Pil bölmesi kapağını güvenli bir şekilde yerine takın.

4.2 İlk Güç Açma

Press the Power button (①) to turn on the meter. The display will illuminate, and the meter will begin taking measurements.

5. Operasyon

5.1 Güç Açma/Kapatma

• To turn ON: Press the Power button (①).
• To turn OFF: Press and hold the Power button (①) for approximately 2 seconds. The meter also features an auto power-off function after a period of inactivity to conserve battery life.

5.2 Ölçüm Alma

Once powered on, the meter will automatically display ambient temperature and relative humidity. Ensure the sensor head is exposed to the environment you wish to measure.

5.3 Birim Seçimi (°C/°F)

Press the °C/°F button to toggle the temperature unit between Celsius and Fahrenheit.

5.4 Dew Point and Wet Bulb Temperature

Press the DP/WB button to cycle through the display of Dew Point temperature and Wet Bulb temperature. The corresponding indicator (DEW POINT or WET BULB) will appear on the LCD.

5.5 Veri Tutma

Press the HOLD button (H) to freeze the current readings on the display. Press it again to release the hold function and resume live measurements.

5.6 MIN/MAX/AVG Function

Press the MIN/MAX button repeatedly to cycle through the minimum, maximum, and average recorded values since the meter was powered on or the function was reset. The corresponding indicator (MIN, MAX, AVG) will be displayed.

5.7 Data Memory (Store/Recall)

• To Store Data: Press the MEM button to save the current readings (temperature, humidity, dew point/wet bulb) into memory. The MEM indicator will flash, and a memory location number will be displayed. The meter can store up to 99 readings.
• Verileri Geri Çağırmak İçin: Press the READ button to view stored data. Use the MIN/MAX buttons to navigate through the stored memory locations.
• To Clear Data: Refer to the full user manual for specific instructions on clearing memory, as this often involves a combination of button presses.

5.8 Arka Işık

Press the Backlight button (☀) to turn the display backlight ON or OFF for improved visibility in low-light conditions.

6. Bakım

6.1 Temizlik

Sayaçın c kısmını silin.asinyumuşak bir g ile, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor head or other openings.

6.2 Pil Değişimi

When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate readings. Follow the battery installation steps in Section 4.1.

6.3 Depolama

Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer, Pro'sKit, directly. Keep your purchase receipt as proof of purchase.