Troy Lighting B5311

Troy Lighting B5311 Transitional One Light Wall Sconce Instruction Manual

Modeli: B5311

1. Ürün Bittiview

The Troy Lighting B5311 is a transitional one-light wall sconce from the Equilibrium collection, featuring a textured bronze finish. This fixture is designed for indoor use and provides ambient lighting.

Troy Lighting B5311 Wall Sconce, front view

Resim 1.1: Ön view of the Troy Lighting B5311 Wall Sconce, showcasing its textured bronze finish and glass shade.

Troy Lighting B5311 Wall Sconce, angled view

Resim 1.2: Açısal view of the Troy Lighting B5311 Wall Sconce, highlighting the design and proportions.

2. Güvenlik Bilgileri

  • Always turn off the electrical power at the main fuse or circuit breaker box before beginning installation.
  • Kurulum sürecinden emin değilseniz, kalifiye bir elektrikçiye danışın.
  • Tüm elektrik bağlantıları yerel yönetmeliklere, kanunlara veya Ulusal Elektrik Koduna (NEC) uygun olmalıdır.
  • Yalnızca belirtilen ampul tipini ve watt değerini kullanın.tagAşırı ısınmayı veya hasarı önlemek için.
  • Bu aydınlatma armatürünü ıslak veya kuru yerlere monte etmeyin.amp locations. It is designed for dry, indoor use only.
  • Kırılmayı önlemek için cam parçaları dikkatli tutun.

3. Paket İçeriği

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture.

  • Wall Sconce Fixture (Model B5311)
  • Cam Gölge
  • Mounting Hardware (Crossbar, mounting screws, wire nuts)
  • Kullanım Kılavuzu

4. Kurulum

Follow these steps carefully for proper installation of your wall sconce.

  1. Gücü Kapatın: Before starting, ensure the power to the junction box is turned off at the circuit breaker or fuse box.
  2. Montajı Hazırlayın: Attach the mounting crossbar to the junction box using the provided mounting screws. Ensure the crossbar is securely fastened.
  3. Kablo Bağlantıları: Connect the fixture's wires to the corresponding house wires. Connect the black (hot) fixture wire to the black (hot) house wire, the white (neutral) fixture wire to the white (neutral) house wire, and the green or bare copper (ground) fixture wire to the green or bare copper (ground) house wire. Secure connections with wire nuts and wrap with electrical tape for added safety.
  4. Montaj Fikstürü: Carefully tuck the wires into the junction box. Align the fixture's backplate with the mounting screws on the crossbar and secure the fixture in place with the decorative nuts or screws.
  5. Ampulü takın: Insert one (1) 60-watt maximum incandescent or equivalent LED bulb into the socket. (Bulb not included).
  6. Cam Abajurunu Takın: Carefully place the glass shade onto the fixture according to the design. Ensure it is stable and secure.
  7. Gücü Geri Yükle: Kurulum tamamlandıktan ve tüm bileşenler yerine sabitlendikten sonra, devre kesiciden elektriği tekrar açın.

5. Operasyon

The Troy Lighting B5311 wall sconce operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

6. Bakım

  • Temizlik: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
  • Ampul Değişimi: Ensure power is off and the bulb has cooled before replacing. Unscrew the old bulb and screw in a new one of the same type and wattage (maksimum 60W).
  • Denetleme: Tüm bağlantıların ve montaj donanımlarının sağlamlığını korumak için periyodik olarak kontrol edin.

7. Sorun Giderme

If your wall sconce is not functioning correctly, refer to the following table for common issues and solutions.

SorunOlası NedenÇözüm
Işık yanmıyorFikstürde güç yokDevre kesiciyi veya sigortayı kontrol edin. Duvar şalterinin açık olduğundan emin olun.
Light bulb is faultyBulb has burned out or is not properly seatedReplace bulb with a new one. Ensure bulb is screwed in tightly.
Gevşek tel bağlantılarıWires are not securely connectedTurn off power, then check and tighten all wire connections.
Armatür titriyorGevşek ampul veya kablolamaTurn off power, check bulb seating and wire connections.

If the problem persists after attempting these solutions, contact a qualified electrician or Troy Lighting customer support.

8. Özellikler

ÖzellikDetay
MarkaTroya Aydınlatma
Model NumarasıB5311
StilGeçiş dönemi
Sona ermekDokulu Bronz
MalzemeMetal, Cam
Gölge RengiPlated Topaz
Işık Sayısı1
Netage60 watt (maks.)
Cilttage120 Volt
Güç KaynağıKablolu Elektrik
Ürün Boyutları10.25 x 5 x 28.5 inç (U x G x Y)
Ürün Ağırlığı10 Pound
Montaj TipiDuvara Montaj

9. Garanti ve Destek

This Troy Lighting B5311 wall sconce comes with a 1 yıllık sınırlı üretici garantisiBu garanti, normal kullanım koşullarında malzeme ve işçilik hatalarını kapsar.

For warranty claims, technical support, or inquiries regarding your product, please contact Troy Lighting customer service directly. Keep your proof of purchase for warranty validation.

For further assistance, please refer to the official Troy Lighting websiteyi ziyaret edin veya müşteri destek kanallarıyla iletişime geçin.

© 2023 Troy Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.