1. Giriş
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Weiser Powerbolt Electronic Deadbolt, Model 9GED14600-101. This electronic deadbolt offers enhanced security and convenience with its keyless touchpad entry and traditional key access. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your product.
Şekil 1: Ön view of the Weiser Powerbolt Electronic Deadbolt, showcasing the keypad and keyhole. This image displays the gold finish of the lock.
2. Önemli Güvenlik Bilgileri
Yaralanmaları veya ürüne zarar gelmesini önlemek için aşağıdaki güvenlik önlemlerine uyun:
- Do not attempt to disassemble or modify the lock beyond the instructions provided in this manual.
- Yalnızca belirtilen pil türünü (4 adet AA pil) kullanın. Eski ve yeni pilleri veya farklı pil türlerini karıştırmayın.
- Keep all components, especially small parts, out of reach of children.
- Ensure proper alignment during installation to prevent binding or excessive force on the deadbolt mechanism.
- Protect the keypad from excessive moisture or direct water exposure.
3. Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:
- Dış Tuş Takımı Aksamı
- Interior Assembly (Turn Knob)
- Sürgü Mandalı
- Grev plakası
- Montaj Plakası
- Montaj Vidaları
- Tuşlar (2)
- SmartKey Learning Tool
- Installation Guide / Drilling Template
Şekil 2: Yan view of the interior assembly of the Weiser Powerbolt Electronic Deadbolt, showing the turn knob and battery compartment area.
4. Kurulum Talimatları
Before you begin, measure your door's backset, cross bore, and thickness to ensure compatibility. This lock is designed for standard door preparations with a 2-1/8" bore hole and 2-3/8" or 2-3/4" backsets.
- Kapıyı Hazırlayın: If installing on a new door, use the provided drilling template to prepare the necessary holes. For existing doors, ensure the bore hole and backset are compatible.
- Mandalı takın: Insert the deadbolt latch into the edge of the door. Ensure the "UP" arrow on the latch is pointing upwards. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure with screws.
- Harici Tuş Takımı Kurulumu: Feed the cable from the exterior keypad assembly through the cross bore hole. Position the keypad flush against the door.
- Montaj Plakasını Takın: Route the cable through the mounting plate. Secure the mounting plate to the door using the provided screws, ensuring it holds the exterior keypad in place.
- Kabloları Bağlayın: Connect the cable from the exterior keypad to the interior assembly. Ensure the connection is secure.
- İç Montajın Kurulumu: Position the interior assembly over the mounting plate, aligning the turn knob shaft with the deadbolt mechanism. Secure the interior assembly to the mounting plate with the remaining screws.
- Pilleri Takın: Open the battery cover on the interior assembly and insert 4 new AA alkaline batteries. Observe correct polarity. Close the battery cover.
- Test İşlemi: With the door open, test the lock's function using the turn knob and the keypad with the default code (if applicable) or a newly programmed code. Ensure the deadbolt extends and retracts smoothly without obstruction.
5. Programlama Talimatları
The Powerbolt Electronic Deadbolt allows for the creation of a Master Code and up to 6 User Codes. The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
Figure 3: Visual representation of key features of the Powerbolt 2, including One Touch Locking, Master Code, User Codes, Bump-Proof, Pick-Proof, and Kick-In Resistant technology.
5.1. Setting the Master Code
The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
- Press the "Program" button (usually located on the interior assembly).
- Enter a new 4-8 digit Master Code.
- Press the "Lock" button.
- Re-enter the new Master Code.
- Press the "Lock" button again. A successful programming tone will sound.
5.2. Kullanıcı Kodları Ekleme
You can store up to 6 unique user codes for access.
- Ana kodunuzu girin.
- "Program" düğmesine basın.
- Press "1" (for adding a user code).
- Lütfen 4-8 haneli yeni bir Kullanıcı Kodu girin.
- Press the "Lock" button. A successful programming tone will sound.
5.3. Kullanıcı Kodlarını Silme
- Ana kodunuzu girin.
- "Program" düğmesine basın.
- Press "2" (for deleting a user code).
- Silmek istediğiniz Kullanıcı Kodunu girin.
- Press the "Lock" button. A successful programming tone will sound.
5.4. Enabling/Disabling Auto-Lock
The lock can be set to automatically re-lock 30 seconds after unlocking.
- Etkinleştirmek: Enter Master Code, press "Program", press "3", press "Lock".
- Devre Dışı Bırakmak için: Enter Master Code, press "Program", press "4", press "Lock".
6. Kullanım Talimatları
6.1. Kapıyı Kilitleme
- Dışarıdan: Press the "Lock" button on the keypad. The deadbolt will extend.
- İç Mekandan: Rotate the turn knob to the locked position.
6.2. Kapının Kilidini Açma
- Kullanıcı Kodu Kullanımı: Enter a valid 4-8 digit User Code on the keypad. The deadbolt will retract.
- Bir Anahtar Kullanarak: Insert the key into the keyhole and turn to unlock.
- İç Mekandan: Rotate the turn knob to the unlocked position.
7. Bakım
7.1. Pil Değişimi
The lock requires 4 AA alkaline batteries. A low battery indicator will alert you when batteries need replacement. Replace all four batteries simultaneously with new ones.
- İç kısımdaki pil kapağını çıkarın.
- Eski pilleri çıkarın.
- 4 adet yeni AA alkalin pili, doğru kutuplara (+/-) dikkat ederek takın.
- Pil kapağını yerine takın.
Not: Replacing batteries does not erase programmed codes.
7.2. Temizlik
Kilidi yumuşak bir bezle temizleyin.amp Bez kullanın. Aşındırıcı temizleyicilerden veya çözücülerden kaçının, çünkü bunlar yüzeye ve elektronik bileşenlere zarar verebilir.
7.3. SmartKey Rekeying
The SmartKey cylinder allows you to rekey your lock to a new key in seconds. Refer to the separate SmartKey rekeying instructions provided with your lock or visit the Weiser website for a video tutorial. You will need your existing key, the new key, and the SmartKey learning tool.
8. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Kilit, tuş takımı girişine yanıt vermiyor. | Dead batteries. Incorrect code entered. Keypad malfunction. | Replace batteries. Ensure correct code is entered. Use the key to unlock and contact support if issue persists. |
| Sürgü tam olarak açılıp kapanmıyor. | Misalignment during installation. Obstruction in door frame. Low batteries. | Check door and frame for obstructions. Verify lock alignment. Replace batteries. |
| Auto-lock feature not working as expected. | Auto-lock feature is disabled. | Refer to Section 5.4 to enable the auto-lock feature. |
| Lock makes unusual noises or jams. | Mechanical issue, potential deadbolt barrel misalignment or damage. | Ensure the deadbolt barrel is not obstructed or misaligned. If the issue persists, contact Weiser customer support. |
| Yeni kodlar programlanamıyor. | Incorrect Master Code. Program button not pressed correctly. | Verify Master Code. Ensure the Program button is pressed firmly. Refer to Section 5. |
9. Ürün Özellikleri
- Modeli: 9GED14600-101
- Marka: Weiser
- Kilit Tipi: Tuş Takımı Elektronik Kilit
- Malzeme: Pirinç
- Renk: Altın
- Boyutlar (U x G x Y): 6 x 11.13 x 4 inç
- Ürün Ağırlığı: 2.4 pound
- Güç Kaynağı: 4 AA Pil (dahil değildir)
- Özellik: Battery Indicator, SmartKey Rekeying
- Arka set: Ayarlanabilir 2-3/8" veya 2-3/4"
- Bore Hole: 2-1/8"
- Kullanıcı Kodları: 6'e kadar
- ANSI/BHMI Rating: 3. Sınıf
10. Garanti ve Müşteri Desteği
For warranty information, technical assistance, or to purchase replacement parts, please contact Weiser customer support directly. Details can typically be found on the official Weiser websitede veya ürün ambalajının içinde.
Weiser Official Webalan: www.weiserlock.com
Please have your model number (9GED14600-101) and purchase date available when contacting support.