HyperX Savage DDR4 Memory Module User Manual

giriiş

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Resim: Ön view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Paket İçeriği

Paketinizin aşağıdaki öğeleri içerdiğini doğrulayın:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Kurulum ve Yükleme

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Hazırlık

1. Uyumluluk Kontrolü: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Kapat: Bilgisayarınızı tamamen kapatın ve güç kablosunu çıkarın.
3. Davayı Aç: Open your computer's side panel to access the motherboard.

2. Modül Kurulumu

1. DIMM Yuvalarını Bulun: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. Açık Klipler: Gently push down the retention clips at both ends of the DIMM slot.
3. Hizalama Modülü: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Modülü Ekle: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Tekrarlamak: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Resim: Açısal view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. Kurulum Sonrası

1. Davayı Kapat: Bilgisayar kasanızın yan panelini tekrar takın.
2. Gücü Tekrar Bağlayın: Plug the power cable back into your computer and power it on.

Kullanım Talimatları

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

XMP Pro'yu Etkinleştirmefile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) profesyonelfiles. Bu profesyonellerfiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. BIOS/UEFI'ye erişim: During system startup, repeatedly press the designated key (commonly SİL, F2, F10, veya F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. XMP Ayarını Bulun: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Enable Profile: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Kaydet ve çık: Değişiklikleri kaydedin ve BIOS/UEFI'den çıkın. Sisteminiz yeni bellek ayarları uygulanmış olarak yeniden başlatılacaktır.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Bakım

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Temiz tut: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Uygun Kullanım: Bellek modüllerini tutarken, altın kontaklara veya entegre devrelere dokunmamak için daima kenarlarından tutun.
• Sıcaklık Kontrolü: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Sorun giderme

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• Sistem Başlatılmıyor:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Olası arızalı modülü belirlemek için yalnızca bir modül takılıyken önyükleme yapmayı deneyin.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile etkinleştirildi.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Sistem Kararsızlığı veya Çökmeleri:
  • Hata olup olmadığını kontrol etmek için bir bellek tanılama aracı (örneğin, Windows Bellek Tanılama veya MemTest86) çalıştırın.
  • Güç kaynağınızın (PSU) tüm bileşenlere yeterli ve istikrarlı güç sağladığından emin olun.
  • Check for proper cooling within your system to prevent overheating.

Özellikler

Garanti ve Destek

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webSiteyi ziyaret edin veya müşteri hizmetleriyle iletişime geçin. Garanti geçerliliği için satın alma belgenizi saklayın.

HyperX Support: www.hyperx.com/destek