Fengda BD-116C Airbrush Gun User Manual

giriiş

This manual provides instructions for the safe and effective operation and maintenance of your Fengda BD-116C Airbrush Gun. Please read this manual thoroughly before use and retain it for future reference.

Güvenlik Bilgileri

UYARI:

• Protect yourself from chemical exposure. Always use appropriate personal protective equipment (PPE) such as respirators, gloves, and eye protection when handling paints and cleaning solutions.
• Handle pressurized components carefully. Ensure all connections are secure before operating the airbrush. Never point the airbrush at yourself or others.
• Ensure proper application of used materials. Dispose of paints, solvents, and cleaning solutions according to local environmental regulations.
• Çocukların erişemeyeceği yerde saklayınız.
• İyi havalandırılan bir ortamda kullanınız.

Paket İçeriği

Aşağıda listelenen tüm öğelerin paketinizde bulunduğunu doğrulayın:

• 1 x BD-R 116 Airbrush Gun
• 1 x Metal Paint Cup (2 ml)
• 1 x Metal Paint Cup (5 ml)
• 1 x Metal Paint Cup (13 ml)
• 3 x Nozzles (0.3 mm, 0.5 mm, 0.8 mm)
• 3 x Needles (0.3 mm, 0.5 mm, 0.8 mm)
• 2 x Air Connectors
• 1 x Hava Hortumu (2 metre)
• 1 x Mounting Tool
• 1 x Kullanım Kılavuzu (bu belge)
• 1 x Molded Plastic Storage Box

Image: The Fengda BD-116C Airbrush Gun with its various nozzles, needles, paint cups, air hose, and tools, all neatly arranged in its storage box.

Kurmak

1. Bileşenleri Paketinden Çıkarın: Carefully remove all items from the storage box. Inspect for any damage.
2. Select Nozzle and Needle: Choose the appropriate nozzle and needle size (0.3mm, 0.5mm, or 0.8mm) for your painting task. The 0.3mm is for fine details, 0.5mm for general work, and 0.8mm for broader coverage. Ensure the needle matches the nozzle size.
3. Assemble Nozzle and Needle:
   • Unscrew the needle chucking guide and pull out the needle.
   • Unscrew the nozzle cap and remove the nozzle.
   • Carefully insert the chosen nozzle and screw the nozzle cap back on. Do not overtighten.
   • Reinsert the chosen needle from the rear of the airbrush, pushing it gently until it seats correctly in the nozzle.
   • Tighten the needle chucking guide.
4. Attach Paint Cup: Screw the desired paint cup (2ml, 5ml, or 13ml) onto the top of the airbrush gun.
5. Hava Hortumunu Bağlayın: Attach one end of the 2-meter air hose to the airbrush gun's air inlet and the other end to your air compressor (not included). Ensure connections are secure to prevent air leaks.
6. Çalışma Alanını Hazırlayın: Set up your workspace in a well-ventilated area. Cover surfaces to protect them from overspray.

Kullanım Talimatları

1. Boyayı Hazırlayın: Thin your paint to the consistency recommended by the paint manufacturer for airbrushing. Test the consistency on a scrap surface.
2. Fill Paint Cup: Carefully pour the prepared paint into the attached paint cup. Do not overfill.
3. Gücü bağlayın: If your compressor is battery-powered, ensure it is charged. Connect the compressor to a power source if it requires mains electricity.
4. Kompresörü Çalıştırın: Activate your air compressor and set the desired air pressure. Start with a lower pressure and adjust as needed.
5. Test Spreyi: Projenize boya uygulamadan önce, püskürtme desenini bir parça malzeme üzerinde test edin.
6. Airbrush Technique:
   • Hold the airbrush approximately 5-15 cm (2-6 inches) from the surface, depending on the desired spray pattern and detail.
   • Press down on the trigger for air flow.
   • Pull back on the trigger to release paint. The further you pull back, the more paint is released.
   • Maintain a consistent distance and movement for even coverage.
   • Always start and end your spray off the work surface to avoid paint build-up.
7. Akışın Ayarlanması: Use the needle stop screw at the rear of the airbrush to limit how far the needle can retract, controlling the maximum paint flow.
8. Bitirme: When finished painting, release the trigger completely. Turn off your air compressor.

Bakım ve Temizlik

Proper cleaning after each use is essential for the longevity and performance of your airbrush gun.

1. İlk Durulama: Empty any remaining paint from the cup. Add a small amount of appropriate cleaner (water for acrylics, solvent for enamels/lacquers) to the cup. Spray the cleaner through the airbrush until it runs clear.
2. Geri Yıkama: Place your finger over the nozzle cap and press down for air, then pull back for paint. This will force air back into the paint cup, bubbling the cleaner and helping to dislodge paint particles. Repeat several times.
3. Derin Temizlik İçin Sökün: For a thorough clean, disassemble the airbrush:
   • Remove the paint cup.
   • Unscrew the needle chucking guide and carefully pull out the needle from the rear. Clean the needle with a cloth dampened with cleaner.
   • Unscrew the nozzle cap and remove the nozzle. Clean the nozzle carefully with a soft brush and cleaner.
   • Clean the airbrush body and paint channel with a brush and cleaner.
4. Yeniden birleştirme: Once all parts are clean and dry, reassemble the airbrush. Apply a tiny amount of airbrush lubricant (if available) to the needle and trigger mechanism.
5. Depolamak: Store the airbrush in its original storage box to protect it from dust and damage.

Sorun giderme

Özellikler

• Modeli: BD-116C
• Marka: Fengda
• Meme Boyutları: 0.3 mm, 0.5 mm, 0.8 mm
• Needle Sizes: 0.3 mm, 0.5 mm, 0.8 mm
• Paint Cup Capacities: 2 ml, 5 ml, 13 ml (metal)
• Hava Hortumu Uzunluğu: 2 metre
• Malzeme: Metal
• Güç Kaynağı: Battery (for compatible compressors, airbrush itself is pneumatic)
• Ürün Ölçüleri (Paket): 24.3x18.3x4.9 cm
• Product Weight (Package): 670 gr

Garanti ve Destek

Garanti bilgileri veya teknik destek için lütfen satın alma işleminizle birlikte verilen belgelere bakın veya satıcınızla iletişime geçin. Garanti talepleri için satın alma belgenizi saklayın.