Foset CALE-6I Instantaneous Water Heater User Manual

1. Giriş

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Foset CALE-6I Instantaneous Water Heater. Please read these instructions carefully before use and retain them for future reference. This water heater is designed to provide hot water on demand for a single service point, utilizing LP gas.

Ön view of the Foset CALE-6I Instantaneous Water Heater.

2. Temel Özellikler

• Instantaneous Heating: Provides hot water on demand without a storage tank, eliminating waiting times.
• Enerji Verimliliği: Saves up to 70% on gas consumption compared to traditional tank water heaters.
• Otomatik Ateşleme: Activates automatically when a hot water tap is opened.
• Elektronik Ateşleme: Powered by two D-type batteries, eliminating the need for a constant pilot flame.
• Dijital Sıcaklık Göstergesi: Shows the current water temperature for precise control.
• Dual Safety System: Equipped with mechanisms to prevent gas leaks and overheating.
• Low Pressure Operation: Functions effectively with a minimum operating pressure of 0.25 kgf/cm².
• Kompakt Tasarım: Lightweight and small footprint for flexible installation.
• Sürekli Akış: Delivers a steady flow of hot water up to 70°C.

Dahili view of the instantaneous water heater, detailing its tankless design, copper heat exchanger coil, and high-power burner. Key benefits such as up to 70% gas savings, low-pressure operation capability, and a capacity of 6 liters per minute for one service are also highlighted.

3. Bileşenler Bittiview

Familiarize yourself with the main components of your water heater:

This image shows the front of the Foset CALE-6I instantaneous water heater, highlighting its main external components: the chimney for exhaust, the control knob for adjusting settings, and the digital display for temperature indication.

• Baca: Exhaust vent for combustion gases.
• Kontrol Düğmesi: Used to adjust gas flow and water temperature.
• Dijital gösterge: Mevcut su sıcaklığını gösterir.
• Su Girişi/Çıkışı: Connections for cold water input and hot water output.
• Gaz girişi: Connection for LP gas supply.
• Pil Bölmesi: Houses two D-type batteries for electronic ignition.

4. Kurulum ve Kurulum

WARNING: Installation must be performed by a qualified professional in accordance with local codes and regulations. Improper installation can lead to gas leaks, fire, or carbon monoxide poisoning.

4.1 Konum Gereksinimleri

• İyi havalandırılan bir alana kurun.
• Ensure adequate clearance around the unit for maintenance and proper ventilation.
• Mount on a solid, vertical surface capable of supporting the unit's weight.
• Protect from freezing temperatures.

4.2 Gaz Bağlantısı

• Connect the water heater to an LP gas supply.
• Use appropriate gas lines and fittings.
• Sabunlu su çözeltisi kullanarak tüm gaz bağlantılarında sızıntı olup olmadığını kontrol edin.

4.3 Su Bağlantısı

• Connect the cold water inlet to your main water supply.
• Connect the hot water outlet to the hot water distribution system for your single service point.
• Ensure all water connections are tight to prevent leaks.

4.4 Pil Kurulumu

• Pil bölmesini açın.
• Insert two D-type batteries, ensuring correct polarity.
• Bölmeyi güvenli bir şekilde kapatın.

5. Kullanım Talimatları

5.1 İlk Başlatma

1. Ensure gas and water supplies are open.
2. Open a hot water tap at the service point. The water heater will automatically ignite.
3. Observe the digital display for temperature readings.

5.2 Sıcaklık Ayarı

• Use the control knob on the front panel to adjust the desired water temperature.
• Turn the knob clockwise to increase temperature and counter-clockwise to decrease it.
• The digital display will show the adjusted temperature.

5.3 Kapatma

• Close the hot water tap. The water heater will automatically turn off.
• For extended periods of non-use, it is recommended to close the main gas and water supply valves.

6. Bakım

Düzenli bakım, su ısıtıcınızın optimum performans göstermesini ve uzun ömürlü olmasını sağlar.

6.1 Temizlik

• Dış yüzeyi yumuşak, damp bezle silin. Aşındırıcı temizleyiciler kullanmayın.
• Periodically check the exhaust vent (chimney) for obstructions.

6.2 Pil Değişimi

• If the digital display fades or the unit fails to ignite, replace the D-type batteries.
• Yeni pilleri takarken doğru kutuplara dikkat edin.

6.3 Profesyonel Muayene

• It is recommended to have the water heater inspected by a qualified technician annually.
• This includes checking gas connections, burner operation, and heat exchanger condition.

7. Sorun Giderme

Servis çağırmadan önce, aşağıdaki sık karşılaşılan sorunları kontrol edin:

If problems persist, contact a qualified technician for assistance.

8. Özellikler

This diagram illustrates the physical dimensions of the Foset CALE-6I water heater, showing its height of 44 cm, width of 30 cm, and depth of 13 cm, which are important for installation planning. (Note: Dimensions in image may vary slightly from detailed specifications.)

9. Garanti Bilgileri

Foset products are manufactured under strict quality standards. This product comes with a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty are typically provided with the product packaging or can be found on the official Foset webLütfen garanti talepleriniz için satın alma belgenizi saklayın.

For warranty service, please contact Foset customer support or the authorized dealer from whom you purchased the product.

10. Müşteri Desteği

If you have any questions, require technical assistance, or need to report an issue, please contact Foset customer support:

• Webalan: Resmi ziyaret edin Foset store on Amazon or the main Foset corporate website for more information and contact details.
• Servis Merkezleri: Refer to your product packaging or the Foset webyetkili servislerin listesi için site.

When contacting support, please have your product model number (CALE-6I) and proof of purchase readily available.