giriiş
The Westek SW103CT Outdoor Swivel Photo Control is designed to automate your outdoor lighting. This device utilizes a photocell sensor to detect ambient light levels, automatically turning connected lights on at dusk and off at dawn. This manual provides essential information for safe installation, proper operation, and maintenance of your photo control unit.
Image: Two Westek SW103CT Outdoor Swivel Photo Controls, illustrating the product's appearance and wiring.
Güvenlik Bilgileri
- UYARI: Elektrik Çarpması Riski. Kurulum veya bakım işlemlerinden önce devre kesiciden veya sigorta kutusundan elektriği kesin.
- Installation should be performed by a qualified electrician or a person with electrical knowledge.
- Tüm kablo bağlantılarının güvenli olduğundan ve yerel elektrik yönetmeliklerine uyduğundan emin olun.
- This product is designed for outdoor use. While the sensor itself is described as weather-proof, ensure all electrical connections are properly sealed and protected from direct water exposure to prevent damage and ensure safety. The product is not submersible.
- Maksimum su miktarını aşmayıntage rating of 150 watts for connected lighting.
- Sadece belirtilen hacimde çalışıntage range (2 Volts, typically 120V AC for household applications, please verify your specific application voltage).
Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:
- Westek SW103CT Outdoor Swivel Photo Control (2 units)
- Montaj Donanımı
Özellikler
| Marka | Batı |
| Model Numarası | SW103CT |
| Malzeme | Plastik |
| İç/Dış Mekan Kullanımı | Dış mekan |
| Güç Kaynağı | Kablolu Elektrik |
| Cilttage | 2 Volts (Note: This typically refers to the control voltage, not line voltage. Standard line voltage for such devices is 120V AC. Consult product packaging for exact operating voltage.) |
| Netage | 150 watt (Maksimum) |
| Light Source Compatibility | Fluorescent, LED, Incandescent, Halogen |
| Ürün Boyutları (U x G x Y) | 6.75"U x 4"G x 2.5"Y |
| Ürün Ağırlığı | 5.6 ons |
Image: Key features of the Westek SW103CT, highlighting the photocell sensor, swivel adjustment, and weatherproof construction.
Kurulum
Başlamadan önce: Ensure power is disconnected at the circuit breaker. Failure to do so may result in serious injury or death.
- Kablolamayı Hazırlayın: The photo control unit comes with 6-inch pre-stripped leads for easy connection.
- Montaj: The unit connects directly to a standard 1/2-inch pipe thread electrical box. Secure the photo control to the electrical box using the provided mounting hardware.
- Kablo Bağlantıları: Connect the photo control wires to your electrical system as follows:
- Siyah Tel: Connect to the incoming Hat (Sıcak) wire from your power source.
- Beyaz Tel: Bağlan Doğal wire from your power source and to the neutral wire of your light fixture.
- Kırmızı Tel: Bağlan Load (Hot) wire of your outdoor light fixture.
- Konumlandırma: The swivel feature allows for optimal light positioning of the photocell sensor. Aim the sensor away from direct artificial light sources (e.g., porch lights, streetlights) that could interfere with its operation. Ensure it has clear exposure to natural daylight.
- Gücü Geri Yükle: Kurulum tamamlandıktan ve tüm bağlantılar güvenli hale getirildikten sonra devre kesicideki gücü geri yükleyin.
Image: Westek SW103CT photo control with visible wiring for electrical connection.
Image: Installation details for the Westek SW103CT, showing connection to an electrical box and maximum wattage.
Operasyon
The Westek SW103CT Photo Control operates automatically based on ambient light levels:
- Alacakaranlıkta Etkinleştirme: When natural light diminishes to a certain level (dusk), the photocell sensor will activate, turning on the connected outdoor lights.
- Şafak Vakti Devre Dışı Bırakma: As natural light increases to a sufficient level (dawn), the photocell sensor will deactivate, turning off the connected outdoor lights.
- Zaman Gecikmesi: The unit incorporates a time delay feature to prevent nuisance flickering or false activation/deactivation due to transient light changes (e.g., car headlights, lightning).
Bakım
To ensure optimal performance and longevity of your photo control unit:
- Sensörü Temizleyin: Periodically inspect the photocell sensor lens for dirt, dust, or debris. Gently wipe it clean with a soft, damp bezle silin. Aşındırıcı temizleyiciler kullanmayın.
- Bağlantıları Denetle: Annually, or if issues arise, inspect all electrical connections for corrosion or looseness. Ensure they remain secure and properly insulated.
- Engelleri Temizle: Ensure no new obstructions (e.g., growing foliage, new structures) are blocking the sensor's exposure to natural light.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Gün batımında ışıklar otomatik olarak yanmaz. |
|
|
| Şafak vakti ışıklar sönmez. |
|
|
| Lights flicker or cycle on/off rapidly. |
|
|
Garanti ve Destek
For warranty information, technical support, or replacement parts, please contact Westek customer service. Keep your purchase receipt as proof of purchase.
Üretici: American Tack